- Source: 7 nm process
In semiconductor manufacturing, the "7 nm" process is a term for the MOSFET technology node following the "10 nm" node, defined by the International Roadmap for Devices and Systems (IRDS), which was preceded by the International Technology Roadmap for Semiconductors (ITRS). It is based on FinFET (fin field-effect transistor) technology, a type of multi-gate MOSFET technology.
As of 2021, the IRDS Lithography standard gives a table of dimensions for the "7 nm" node, with examples given below:
The 2021 IRDS Lithography standard is a retrospective document, as the first volume production of a "7 nm" branded process was in 2016 with Taiwan Semiconductor Manufacturing Company's (TSMC) production of 256Mbit SRAM memory chips using a "7nm" process called N7. Samsung started mass production of their "7nm" process (7LPP) devices in 2018. These process nodes had the same approximate transistor density as Intel's "10 nm Enhanced Superfin" node, later rebranded "Intel 7."
Since at least 1997, the length scale of a process node has not referred to any particular dimension on the integrated circuits, such as gate length, metal pitch, or gate pitch, as new lithography processes no longer uniformly shrank all features on a chip. By the late 2010s, the length scale had become a commercial name that indicated a new generation of process technologies, without any relation to physical properties. Previous ITRS and IRDS standards had insufficient guidance on process node naming conventions to address the widely varying dimensions on a chip, leading to a divergence between how foundries branded their lithography and the actual dimensions their process nodes achieved.
The first mainstream "7nm" mobile processor intended for mass market use, the Apple A12 Bionic, was announced at Apple's September 2018 event. Although Huawei announced its own "7nm" processor before the Apple A12 Bionic, the Kirin 980 on August 31, 2018, the Apple A12 Bionic was released for public, mass market use to consumers before the Kirin 980. Both chips were manufactured by TSMC.
In 2019, AMD released their "Rome" (EPYC 2) processors for servers and datacenters, which are based on TSMC's N7 node and feature up to 64 cores and 128 threads. They also released their "Matisse" consumer desktop processors with up to 16 cores and 32 threads. However, the I/O die on the Rome multi-chip module (MCM) is fabricated with the GlobalFoundries' 14nm (14HP) process, while the Matisse's I/O die uses the GlobalFoundries' "12nm" (12LP+) process. The Radeon RX 5000 series is also based on TSMC's N7 process.
History
= Technology Demonstrations
=In the early 2000s, researchers began demonstrating 7nm level MOSFETs , with an IBM team including Bruce Doris, Omer Dokumaci, Meikei Ieong, and Anda Mocuta successfully fabricating a 6nm silicon-on-insulator (SOI) MOSFET. Shortly after, in 2003, NEC's researchers Hitoshi Wakabayashi and Shigeharu Yamagami advanced further by fabricating a 5nm MOSFET.
In July 2015, IBM announced that they had built the first functional transistors with "7nm" technology, using a silicon-germanium process. With further development in February 2017, TSMC produced 256Mbit SRAM memory cells at with their "7nm" process, with a cell area of 0.027 square micrometers, giving a square minimum feature size:
F
2
=
0.027
n
n
2
(
0.07
n
n
)
2
=
550
{\displaystyle F^{2}={\cfrac {0.027nn^{2}}{(0.07nn)^{2}}}=550}
Cumulating in TSMC starting volume of this 7nm production in 2018.
= Expected commercialization and technologies
=In 2015, Intel expected that at the 7nm node, III-V semiconductors would have to be used in transistors, signaling a shift away from silicon.
In April 2016, TSMC announced that "7nm" trial production would begin in the first half of 2017. In April 2017, TSMC began risk production of 256Mbit SRAM memory chips using a "7nm" (N7FF+) process, with extreme ultraviolet lithography (EUV). TSMC's "7nm" production plans, as of early 2017, was to use deep ultraviolet (DUV) immersion lithography initially on this process node (N7FF), and transition from risk to commercial volume manufacturing from Q2 2017 to Q2 2018. Also, their later generation "7nm" (N7FF+) production was planned to use EUV multiple patterning and have an estimated transition from risk to volume manufacturing between 2018 and 2019.
In September 2016, GlobalFoundries announced trial production in the second half of 2017 and risk production in early 2018, with test chips already running.
In February 2017, Intel announced Fab 42 in Chandler, Arizona, which was according to press releases at that time expected to produce microprocessors using a "7nm" (Intel 4) manufacturing process. The company had not, at that time, published any expected values for feature lengths at this process node.
In April 2018, TSMC announced volume production of "7nm" (CLN7FF, N7) chips. In June 2018, the company announced mass production ramp up.
In May 2018, Samsung announced production of "7nm" (7LPP) chips this year. ASML Holding NV is their main supplier of EUV lithography machines.
In August 2018, GlobalFoundries announced it was stopping development of "7nm" chips, citing cost.
On October 28, 2018, Samsung announced their second generation "7nm" process (7LPP) had entered risk production and was at that time expected to have entered mass production by 2019.
On January 17, 2019, for the Q4 2018 earnings call, TSMC mentioned that different customers would have "different flavors" of second generation "7nm".
On April 16, 2019, TSMC announced their "6nm" process called (CLN6FF, N6), which was, according to a press release made on April 16, 2019, at that time expected to have been in mass products from 2021. N6 was at that time expected to have used EUVL in up to 5 layers, compared to up to 4 layers in their N7+ process.
On July 28, 2019, TSMC announced their second gen "7nm" process called N7P, which was projected to have been DUV-based like their N7 process. Since N7P was fully IP-compatible with the original "7nm", while N7+ (which uses EUV) was not, N7+ (announced earlier as "7nm+") was to have been a separate process from "7nm". N6 ("6nm"), another EUV-based process, was at that time planned to have been released later than even TSMC's "5nm" (N5) process, with the IP-compatibility with N7. At their Q1 2019 earnings call, TSMC reiterated their Q4 2018 statement that N7+ was at that time expected to have generated less than $1 billion TWD in revenue in 2019.
On October 5, 2019, AMD announced their EPYC Roadmap, featuring Milan chips built using TSMC's N7+ process.
On October 7, 2019, TSMC announced they had started delivering N7+ products to market in high volume.
On July 26, 2021, Intel announced their new manufacturing roadmap, renaming all of their future process nodes. Intel's "10nm" Enhanced SuperFin (10ESF), which was roughly equivalent to TSMC's N7 process, would thenceforth be known as "Intel 7", while their earlier "7nm" process would erstwhile be called "Intel 4". As a result, Intel's first processors based on Intel 7 were at that time planned to have started shipping by the second half of 2022, whereas Intel announced earlier that they were planning to have launched "7nm" processors in 2023.
= Technology commercialization
=In June 2018, AMD announced 7nm Radeon Instinct GPUs launching in the second half of 2018. In August 2018, the company confirmed the release of the GPUs.
On August 21, 2018, Huawei announced their HiSilicon Kirin 980 SoC to be used in their Huawei Mate 20 and Mate 20 Pro built using TSMC's 7nm (N7) process.
On September 12, 2018, Apple announced their A12 Bionic chip used in iPhone XS and iPhone XR built using TSMC's 7nm (N7) process. The A12 processor became the first 7nm chip for mass market use as it released before the Huawei Mate 20. On October 30, 2018, Apple announced their A12X Bionic chip used in iPad Pro built using TSMC's 7nm (N7) process.
On December 4, 2018, Qualcomm announced their Snapdragon 855 and 8cx built using TSMC's 7nm (N7) process. The first mass product featuring the Snapdragon 855 was the Lenovo Z5 Pro GT, which was announced on December 18, 2018.
On May 29, 2019, MediaTek announced their 5G SoC built using a TSMC 7nm process.
On July 7, 2019, AMD officially launched their Ryzen 3000 series of central processing units, based on the TSMC 7nm process and Zen 2 microarchitecture.
On August 6, 2019, Samsung announced their Exynos 9825 SoC, the first chip built using their 7LPP process. The Exynos 9825 is the first mass market chip built featuring EUVL.
On September 6, 2019, Huawei announced their HiSilicon Kirin 990 4G & 990 5G SoCs, built using TSMC's N7 and N7+ processes.
On September 10, 2019, Apple announced their A13 Bionic chip used in iPhone 11 and iPhone 11 Pro built using TSMC's 2nd gen N7P process.
7nm (N7 nodes) manufacturing made up 36% of TSMC's revenue in the second quarter of 2020.
On August 17, 2020, IBM announced their Power10 processor.
On July 26, 2021, Intel announced that their Alder Lake processors would be manufactured using their newly rebranded "Intel 7" process, previously known as "10nm Enhanced SuperFin". These processors were, at that time, expected based on press releases to have been planned to have been released in the second half of 2021. The company earlier confirmed a 7nm, now called "Intel 4", microprocessor family called Meteor Lake to be released in 2023.
Patterning difficulties
The "7nm" foundry node is expected to utilize any of or a combination of the following patterning technologies: pitch splitting, self-aligned patterning, and EUV lithography. Each of these technologies carries significant challenges in critical dimension (CD) control as well as pattern placement, all involving neighboring features.
= Pitch splitting
=Pitch splitting involves splitting features that are too close together onto different masks, which are exposed successively, followed by litho-etch processing. Due to the use of different exposures, there is always the risk of overlay error between the two exposures, as well as different CDs resulting from the different exposures.
= Spacer patterning
=Spacer patterning involves depositing a layer onto pre-patterned features, then etching back to form spacers on the sidewalls of those features, referred to as core features. After removing the core features, the spacers are used as an etch mask to define trenches in the underlying layer. While the spacer CD control is generally excellent, the trench CD may fall into one of two populations, due to the two possibilities of being located where a core feature was located or in the remaining gap. This is known as 'pitch walking'. Generally, pitch = core CD + gap CD + 2 * spacer CD, but this does not guarantee core CD = gap CD. For FEOL features like gate or active area isolation (e.g. fins), the trench CD is not as critical as the spacer-defined CD, in which case, spacer patterning is actually the preferred patterning approach.
When self-aligned quadruple patterning (SAQP) is used, there is a second spacer that is utilized, replacing the first one. In this case, the core CD is replaced by core CD - 2* 2nd spacer CD, and the gap CD is replaced by gap CD - 2 * 2nd spacer CD. Thus, some feature dimensions are strictly defined by the second spacer CD, while the remaining feature dimensions are defined by the core CD, core pitch, and first and second spacer CD's. The core CD and core pitch are defined by conventional lithography, while the spacer CDs are independent of lithography. This is actually expected to have less variation than pitch splitting, where an additional exposure defines its own CD, both directly and through overlay.
Spacer-defined lines also require cutting. The cut spots may shift at exposure, resulting in distorted line ends or intrusions into adjacent lines.
Self-aligned litho-etch-litho-etch (SALELE) has been implemented for "7nm" BEOL patterning.
= EUV lithography
=Extreme ultraviolet lithography (also known as EUV or EUVL) is capable of resolving features below 20nm in conventional lithography style. However, the 3D reflective nature of the EUV mask results in new anomalies in the imaging. One particular nuisance is the two-bar effect, where a pair of identical bar-shaped features do not focus identically. One feature is essentially in the 'shadow' of the other. Consequently, the two features generally have different CDs which change through focus, and these features also shift position through focus. This effect may be similar to what may be encountered with pitch splitting. A related issue is the difference of best focus among features of different pitches.
EUV also has issues with reliably printing all features in a large population; some contacts may be completely missing or lines bridged. These are known as stochastic printing failures. The defect level is on the order of 1K/mm2.
The tip-to-tip gap is hard to control for EUV, largely due to the illumination constraint. A separate exposure(s) for cutting lines is preferred.
Attenuated phase shift masks have been used in production for 90 nm node for adequate focus windows for arbitrarily pitched contacts with the ArF laser wavelength (193nm), whereas this resolution enhancement is not available for EUV.
At 2021 SPIE's EUV Lithography conference, it was reported by a TSMC customer that EUV contact yield was comparable to immersion multipatterning yield.
= Comparison with previous nodes
=Due to these challenges, "7nm" poses unprecedented patterning difficulty in the back end of line (BEOL). The previous high-volume, long-lived foundry node (Samsung "10nm", TSMC "16nm") used pitch splitting for the tighter pitch metal layers.
= Cycle time: immersion vs. EUV
=Due to the immersion tools being faster presently, multipatterning is still used on most layers. On the layers requiring immersion quad-patterning, the layer completion throughput by EUV is comparable. On the other layers, immersion would be more productive at completing the layer even with multipatterning.
Design rule management in volume production
The "7nm" metal patterning currently practiced by TSMC involves self-aligned double patterning (SADP) lines with cuts inserted within a cell on a separate mask as needed to reduce cell height. However, self-aligned quad patterning (SAQP) is used to form the fin, the most important factor to performance. Design rule checks also allow via multi-patterning to be avoided, and provide enough clearances for cuts that only one cut mask is needed.
Process nodes and process offerings
The naming of process nodes by 4 different manufacturers (TSMC, Samsung, SMIC, Intel) is partially marketing-driven and not directly related to any measurable distance on a chip – for example TSMC's "7nm" node was previously similar in some key dimensions to Intel's planned first-iteration "10nm" node, before Intel released further iterations, culminating in "10nm Enhanced SuperFin", which was later renamed to "Intel 7" for marketing reasons.
Since EUV implementation at "7nm" is still limited, multipatterning still plays an important part in cost and yield; EUV adds extra considerations. The resolution for most critical layers is still determined by multiple patterning. For example, for Samsung's "7nm", even with EUV single-patterned 36nm pitch layers, 44nm pitch layers would still be quadruple patterned.
GlobalFoundries' "7nm" 7LP (Leading Performance) process would have offered 40% higher performance or 60%+ lower power with a 2x scaling in density and at a 30-45+% lower cost per die over its "14nm" process. The Contacted Poly Pitch (CPP) would have been 56nm and the Minimum Metal Pitch (MMP) would have been 40nm, produced with Self-Aligned Double Patterning (SADP). A 6T SRAM cell would have been 0.269 square microns in size. GlobalFoundries planned to eventually use EUV lithography in an improved process called 7LP+. GlobalFoundries later stopped all "7nm" and beyond process development.
Intel's new "Intel 7" process, previously known as "10nm Enhanced SuperFin" (10ESF), is based on its previous "10nm" node. The node will feature a 10-15% increase in performance per watt. Meanwhile, their old "7nm" process, now called "Intel 4", was at that time expected to have been released in 2023. Few details about the "Intel 4" node had at that time been made public, although its transistor density had at that time been estimated to be at least 202 million transistors per square millimeter. As of 2020, Intel had been experiencing problems with its "Intel 4" process to the point of outsourcing production of its Ponte Vecchio GPUs.
References
External links
7 nm lithography process
Kata Kunci Pencarian:
- Proses 7 nm
- Proses 5 nm
- Proses 14 nm
- Proses 10 nm
- Semiconductor Manufacturing International Corporation
- Daftar contoh skala semikonduktor
- FinFET
- Insulin
- Dioda pemancar cahaya organik
- Magnesium sulfat
- 7 nm process
- 5 nm process
- 14 nm process
- 10 nm process
- 2 nm process
- 3 nm process
- 65 nm process
- 22 nm process
- 32 nm process
- 45 nm process
