• Source: Canadian postal abbreviations for provinces and territories

Canadian provincial and territorial postal abbreviations are used by Canada Post in a code system consisting of two capital letters, to represent the 13 provinces and territories on addressed mail. These abbreviations allow automated sorting.
ISO 3166-2:CA identifiers' second elements are all the same as these; ISO adopted the existing Canada Post abbreviations.
These abbreviations are not the source of letters in Canadian postal codes, which are assigned by Canada Post on a different basis than these abbreviations. While postal codes are also used for sorting, they allow extensive regional sorting. In addition, several provinces have postal codes that begin with different letters.
The codes replaced the inconsistent traditional system used by Canadians until the 1990s. Apart from the postal abbreviations, there are no officially designated traditional (or standard) abbreviations for the provinces. Natural Resources Canada, however, maintains a list of such abbreviations which are recommended for "general purpose use" and are also used in other official contexts, such as the census conducted by Statistics Canada. Some of the French versions included a hyphen. Nunavut (created in 1999) does not have a designated abbreviation because it did not exist when these codes were phased out, though some can be found in other official works.




Names and abbreviations






Choice of letters


The sources of the postal abbreviations vary. Some are from the initials of two of the words in the name of a province or territory, while others are from the first and final letter or from the first and some other letter in the name. All of these names are based on the English form of the name, though they also correspond to their French equivalents in various ways (for example, NT could be read for the first and last letters of Nord-Ouest, instead of Northwest Territories). For Quebec and New Brunswick, the two provinces with large numbers of French speakers, the initials in both languages are identical. French equivalents of each abbreviation once existed: see Traditional abbreviations.




= Avoidance of naming overlaps with U.S.

=
These abbreviations are fully compatible with the equivalent two-letter codes used for states and territorial areas of the United States, because no abbreviations overlap. The policy of not overlapping adjacent-country abbreviations, which helps the postal processing system avoid dealing with naming collisions, precludes use of NV for Nunavut (compare NV for Nevada) and TN for Terre-Neuve/Terra Nova/Newfoundland (compare TN for Tennessee). Manitoba's abbreviation, MB, is due to U.S. states already having abbreviations in all of the letters of the province's name besides "B". This policy later became a formal agreement between Canada Post and the USPS. The USPS changed the abbreviation for the U.S. state of Nebraska from NB to NE in November 1969 to avoid a conflict with New Brunswick.
The Canadian policy of adopting provincial abbreviations that did not overlap with the state abbreviations of adjacent countries differed from the situation in Mexico, where two-letter combinations for Mexican states were chosen by various competing commercial organizations (in the absence of any official Correos de México list) regardless of whether that combination was already in use in the United States or Canada, e.g., CO (Coahuila/Colorado), ME (Mexico/Maine), MI (Michoacán/Michigan), MO (Morelos/Missouri), NL (Nuevo León/Newfoundland and Labrador), and BC (Baja California/British Columbia).
ISO 3166-2, an international standard, offers an alternative with globally unique administrative division identifiers, whose division elements are all between one and three letters long. This is very useful for software and web development, although it may be moot for established postal systems. Its codes for Canada, the U.S., and Mexico are listed at ISO 3166-2:CA, ISO 3166-2:US, and ISO 3166-2:MX, respectively.




= Changes over time

=

In 1991, the code for Quebec was changed from PQ to QC.
Nunavut's code became effective on 13 December 2000; before this date, but after Nunavut's creation on 1 April 1999, the abbreviation "NT" was used for Nunavut as well as the Northwest Territories. Canadian postal codes begin with "X" for both NT and NU, the only two territorial or provincial jurisdictions to share the same initial postal code letter. However, the new code NU was chosen to stem possible confusion and to reflect the new territory's creation.
On 21 October 2002, Newfoundland and Labrador's postal abbreviation was changed from NF to NL. This reflected the provincial name change from "Newfoundland" to "Newfoundland and Labrador" on 6 December 2001.




Sample of a properly formatted address


Source: Canadian Addressing Guide
For domestic mail:

John Doe
27-1643 DUNDAS ST W
TORONTO ON M6K 1V2

For international mail:

Cristina Cruz
Apartado 3068
46807 Puerto Vallarta Jalisco
MEXICO

Note that the street type, unit type, and city quadrant, if applicable, are abbreviated, without periods (though using periods, or even spelling out every word in its entirety, is unlikely to affect delivery in any way). Note also, for domestic mail, the lack of a comma between municipality and province or territory, the double space between the latter and the postal code, and the single space between segments of postal code, all on one line. For domestic mail, this must be the last line of the address, while for international mail, it is followed by a final line giving only the unabbreviated country name. Addresses should be done in all-upper-case without punctuation, and the unit number may follow street number, with a suitable unit identifier, e.g., "1643 DUNDAS ST W APT 27" using the above example.
The last line of the address block area should include only the complete country name (no abbreviations) written in uppercase letters. Mail to the US often omits the country name, and vice versa, given that no postal codes nor provincial/territorial/state abbreviations duplicate one another.
Foreign postal codes, if used, should be placed on the line above the destination country. The following shows the order of information for the destination address:
LINE 1: NAME OF ADDRESSEE
LINE 2: STREET ADDRESS OR POST OFFICE BOX NUMBER
LINE 3: CITY OR TOWN NAME, OTHER PRINCIPAL SUBDIVISION (such as PROVINCE, STATE, or COUNTRY) AND POSTAL CODE (IF KNOWN) (Note: in some countries, the postal code may precede the city or town name)
LINE 4: COUNTRY NAME (UPPERCASE LETTERS IN ENGLISH)
From the USPS IMM 122.1 Destination address
Within and to Canada, there must be two spaces between the province abbreviation and the postal code, as shown below between "ON" and "K1A 0B1":

MS HELEN SAUNDERS
1010 CLEAR STREET
OTTAWA ON K1A 0B1




See also


Canadian postal code
ISO 3166-2:CA
U.S. postal abbreviations




References

Kata Kunci Pencarian:

• Canadian postal abbreviations for provinces and territories
• List of U.S. state and territory abbreviations
• Postal codes in Canada
• ISO 3166-2:CA
• Postage stamps and postal history of Canada
• Yukon
• Postal code
• Address
• Outline of Canada
• .gov