• Source: Commonwealth Fusion Systems

Commonwealth Fusion Systems (CFS) is an American fusion power company founded in 2018 in Cambridge, Massachusetts after a spin-out from the Massachusetts Institute of Technology (MIT). Its stated goal is to build a small fusion power plant based on the ARC tokamak design. It has participated in the United States Department of Energy’s INFUSE public-private knowledge innovation scheme, with several national labs and universities.




History


CFS was founded in 2018 as a spin-off from the MIT Plasma Science and Fusion Center. After initial funding of $50 million in 2018 from the Italian multinational Eni, CFS closed its series A round of venture capital funding in 2019 with a total of US$ 115 million in funding from Eni, Bill Gates's Breakthrough Energy Ventures, Vinod Khosla's Khosla Ventures, and others. CFS raised an additional US$ 84 million in series A2 funding from Singapore's Temasek, Norway's Equinor, and Devonshire Investors, as well as from previous investors. As of October 2020, CFS had approximately 100 employees.
In September 2020, the company reported significant progress in the physics and engineering design of the SPARC tokamak, and in October 2020, the development of a new high temperature superconducting cable, called VIPER. Over the 9-month period from 2019 to 2020, the company purchased over 186 miles of the wire in 400-600 meter lengths from vendors, more than was produced by some vendors over the preceding 6 years.
In March 2021, CFS announced plans to build a headquarters, manufacturing, and research campus (including the SPARC tokamak), in Devens, Massachusetts. Also in 2021, CEO Bob Mumgaard was appointed to the board of directors of the Fusion Industry Association, which was incorporated as a non profit association with a focus on combating climate change.
In September 2021, the company announced the demonstration of a high temperature superconducting magnet, able to generate magnetic fields of 20 Tesla. According to the New York Times, this was a successful test of "the world's most powerful version of the type of magnet crucial to many fusion efforts"
In November 2021, the company raised an additional $1.8 billion in Series B funding to construct and operate the SPARC tokamak, funded by Temasek Holdings, Google, Bill Gates and Eni.
In December the company began construction on SPARC in Devens, Massachusetts.
In March 2022, Axios reported that as a result of sanctions against Russia, CFS faced significant supply chain problems.
By late 2022, CFS had grown to approximately 350 employees and was preparing to move into its Devens campus.
A ceremonial opening for the Devens campus was held in February 2023.
In March 2023, Eni and CFS signed a multi-year agreement to collaborate in obtaining the components and authorizations necessary for the construction of the first SPARC experimental plant, as well as the construction of the first Arc power plant and the identification of countries that may be interested in hosting it.
In May 2023, United States Department of Energy granted the company additional funding along with seven other US companies via the Milestone-Based Fusion Development Program.




Technology


CFS intends to demonstrate net-positive energy in a tokamak via the SPARC tokamak, which will pave the way for a multi-hundred MW electric ARC plant. They plan to achieve this by incorporating a large-bore, high field (20 Tesla) superconducting magnet made of VIPER, a yttrium barium copper oxide superconducting tape. As a high-temperature superconductor, VIPER can sustain higher electric currents and magnetic fields than were previously possible. Previous tokamaks used copper or low-temperature superconducting magnets that need to be large in size to create the magnetic field that is necessary to achieve net energy. The CFS high-temperature superconductor magnet is intended to create much stronger magnetic fields, allowing the tokamaks to be much smaller.
The first magnet of this type was built and tested in 2021. The D-shaped magnet consisted of 16 layers, each containing HTS tape. It weighed 10 tons and stood 8 feet tall, including 165 miles of tape. SPARC will include 18 similar magnets. The magnet technology used in SPARC is intended to give "the world a clear path to fusion power," according to the CFS CEO Bob Mumgaard.
As of January 2024, SPARC was targeted for completion by 2025. CFS also plans to build a power plant based on the ARC design at the beginning of the 2030s. Both SPARC and ARC plan to use deuterium-tritium fuel.
SPARC is predicted to have a burning plasma. That means that the fusion process would be predominantly self-heating.




See also






References






External links


Official website
Cho, Adrian (September 8, 2021). "This powerful electromagnet could help make fusion energy a reality". Science. doi:10.1126/science.acx9064. Archived from the original on September 9, 2021. Retrieved September 11, 2021.

Kata Kunci Pencarian:

• Daftar perusahaan yang tercatat di Bursa Efek New York (F)
• Commonwealth Fusion Systems
• Fusion power
• ARC fusion reactor
• SPARC (tokamak)
• Magnetic confinement fusion
• Milestone-Based Fusion Development Program
• Nuclear fusion
• MIT Plasma Science and Fusion Center
• Tokamak
• History of nuclear fusion