- Source: LEED
Leadership in Energy and Environmental Design (LEED) is a green building certification program used worldwide. Developed by the non-profit U.S. Green Building Council (USGBC), it includes a set of rating systems for the design, construction, operation, and maintenance of green buildings, homes, and neighborhoods, which aims to help building owners and operators be environmentally responsible and use resources efficiently.
As of 2023 there were over 105,000 LEED-certified buildings and over 205,000 LEED-accredited professionals in 185 countries worldwide.
In the US, the District of Columbia consistently leads in LEED-certified square footage per capita, followed in 2022 by the top-ranking states of Massachusetts, Illinois, New York, California, and Maryland.
Outside the United States, the top-ranking countries for 2022 were Mainland China, India, Canada, Brazil, and Sweden.
LEED Canada has developed a separate rating system adapted to the Canadian climate and regulations.
Many U.S. federal agencies, state and local governments require or reward LEED certification. As of 2022, based on certified square feet per capita, the leading five states (after the District of Columbia) were Massachusetts, Illinois, New York, California, and Maryland. Incentives can include tax credits, zoning allowances, reduced fees, and expedited permitting. Offices, healthcare-, and education-related buildings are the most frequent LEED-certified buildings in the US (over 60%), followed by warehouses, distribution centers, retail projects and multifamily dwellings (another 20%).
Studies have found that for-rent LEED office spaces generally have higher rents and occupancy rates and lower capitalization rates.
LEED is a design tool rather than a performance-measurement tool and has tended to focus on energy modeling rather than actual energy consumption. It has been criticized for a point system that can lead to inappropriate design choices and the prioritization of LEED certification points over actual energy conservation; for lacking climate specificity; for not sufficiently addressing issues of climate change and extreme weather; and for not incorporating principles of a circular economy. Draft versions of LEED v5 were released for public comment in 2024, and the final version of LEED v5 is expected to appear in 2025. It may address some of the previous criticisms.
Despite concerns, LEED has been described as a "transformative force in the design and construction industry". LEED is credited with providing a framework for green building, expanding the use of green practices and products in buildings, encouraging sustainable forestry, and helping professionals to consider buildings in terms of the well-being of their occupants and as part of larger systems.
History
In April 1993, the U.S. Green Building Council (USGBC) was founded by Rick Fedrizzi, the head of environmental marketing at Carrier, real estate developer David Gottfried, and environmental lawyer Michael Italiano. Representatives from 60 firms and nonprofits met at the American Institute of Architects to discuss organizing within the building industry to support green building and develop a green building rating system.
Also influential early on was architect Bob Berkebile.
Fedrizzi served as the volunteer founding chair of USGBC from 1993 to 2004, and became its CEO as of 2004. As of November 4, 2016, he was succeeded as president and CEO of USGBC by Mahesh Ramanujam. Ramanujam served as CEO until 2021. Peter Templeton became interim president and CEO of USGBC as of November 1, 2021.
A key player in developing the Leadership in Energy and Environmental Design (LEED) green certification program was Natural Resources Defense Council (NRDC) senior scientist Robert K. Watson. It was Watson, sometimes referred to as the "Founding Father of LEED", who created the acronym.
Over two decades, Watson led a broad-based consensus process, bringing together non-profit organizations, government agencies, architects, engineers, developers, builders, product manufacturers and other industry leaders. The original planning group consisted of Watson, Mike Italiano, architect Bill Reed (founding LEED Technical Committee co-chair 1994–2003), architect Sandy Mendler, builder Gerard Heiber and engineer Richard Bourne.
Tom Paladino and Lynne Barker (formerly King) co-chaired the LEED Pilot Committee from 1996–2001.
Scot Horst chaired the LEED Steering Committee beginning in 2005 and was deeply involved in the development of LEED 2009.
Joel Ann Todd took over as chair of the steering committee from 2009 to 2013, working to develop LEED v4, and introducing social equity credits.
Other steering committee chairs include Chris Schaffner (2019) and Jennifer Sanguinetti (2020).
Chairs of the USGBC's Energy and Atmosphere Technical Advisory Group for LEED technology have included Gregory Kats.
The LEED initiative has been strongly supported by the USGBC Board of Directors, including
Chair of the Board of Directors Steven Winter (1999–2003). The current chair of the Board of Directors is Anyeley Hallová (2023).
LEED has grown from one standard for new construction to a comprehensive system of interrelated standards covering aspects from the design and construction to the maintenance and operation of buildings. LEED has also grown from six committee volunteers to an organization of 122,626 volunteers, professionals and staff.
As of 2023, more than 185,000 LEED projects representing over 28 billion square feet (2.6×10^9 m2) have been proposed worldwide, and more than 105,000 projects representing over 12 billion square feet (1.1×10^9 m2) have been certified in 185 countries.
However, lumber, chemical and plastics trade groups have lobbied to weaken the application of LEED guidelines in several southern states. In 2013, the states of Alabama, Georgia and Mississippi effectively banned the use of LEED in new public buildings, in favor of other industry standards that the USGBC considers too lax. LEED is considered a target of a type of disinformation attack known as astroturfing, involving "fake grassroots organizations usually sponsored by large corporations".
Unlike model building codes, such as the International Building Code, only members of the USGBC and specific "in-house" committees may add to, subtract from, or edit the standard, subject to an internal review process. Proposals to modify the LEED standards are offered and publicly reviewed by USGBC's member organizations, of which there were 4551 as of October 2023.
Rating systems
LEED has evolved since 1998 to more accurately represent and incorporate emerging green building technologies. LEED has developed building programs specific to new construction (NC), core and shell (CS), commercial interiors (CI), existing buildings (EB), neighborhood development (ND), homes (LEED for Homes), retail, schools, and healthcare.
The pilot version, LEED New Construction (NC) v1.0, led to LEED NCv2.0, LEED NCv2.2 in 2005, LEED 2009 (a.k.a. LEED v3) in 2009, and LEED v4 in November 2013. LEED 2009 was depreciated for new projects registered from October 31, 2016. LEED v4.1 was released on April 2, 2019.
Draft versions of LEED v5 have been released and revised in response to public comment during 2024. The official final version of LEED v5 is expected to be released in 2025. Future updates to the standard are planned to occur every five years.
LEED forms the basis for other sustainability rating systems such as the U.S. Environmental Protection Agency's (EPA) Labs21 and LEED Canada. The Australian Green Star is based on both LEED and the UK's Building Research Establishment Environmental Assessment Methodology (BREEAM).
= LEED v3 (2009)
=
LEED 2009 encompasses ten rating systems for the design, construction and operation of buildings, homes and neighborhoods. Five overarching categories correspond to the specialties available under the LEED professional program. That suite consists of:
Green building design and construction (BD+C) – for new construction, core and shell, schools, retail spaces (new constructions and major renovations), and healthcare facilities
Green interior design and construction – for commercial and retail interiors
Green building operations and maintenance
Green neighborhood development
Green home design and construction
LEED v3 aligned credits across all LEED rating systems, weighted by environmental priority. It reflects a continuous development process, with a revised third-party certification program and online resources.
Under LEED 2009, an evaluated project scores points to a possible maximum of 100 across six categories: sustainable sites, water efficiency, energy and atmosphere, materials and resources, indoor environment quality (IEQ) and design innovation. Each of these categories also includes mandatory requirements, which receive no points. Up to 10 additional points may be earned: 4 for regional priority credits and 6 for innovation in design. Additional performance categories for residences (LEED for Homes) recognize the importance of transportation access, open space, and outdoor physical activity, and the need for buildings and settlements to educate occupants.
Buildings can qualify for four levels of certification:
Certified: 40–49 points
Silver: 50–59 points
Gold: 60–79 points
Platinum: 80 points and above
The aim of LEED 2009 is to allocate points "based on the potential environmental impacts and human benefits of each credit". These are weighed using the environmental impact categories of the EPA's Tools for the Reduction and Assessment of Chemical and Other Environmental Impacts (TRACI) and the environmental-impact weighting scheme developed by the National Institute of Standards and Technology (NIST).
Prior to LEED 2009 evaluation and certification, a building must comply with minimum requirements including environmental laws and regulations, occupancy scenarios, building permanence and pre-rating completion, site boundaries and area-to-site ratios. Its owner must share data on the building's energy and water use for five years after occupancy (for new construction) or date of certification (for existing buildings).
The credit weighting process has the following steps: First, a collection of reference buildings are assessed to estimate the environmental impacts of similar buildings. NIST weightings are then applied to judge the relative importance of these impacts in each category. Data regarding actual impacts on environmental and human health are then used to assign points to individual categories and measures. This system results in a weighted average for each rating scheme based upon actual impacts and the relative importance of those impacts to human health and environmental quality.
The LEED council also appears to have assigned credit and measured weighting based upon the market implications of point allocation.
From 2010, buildings can use carbon offsets to achieve green power credits for LEED-NC (new construction certification).
= LEED v4 (2014)
=
For LEED BD+C v4 credit, the IEQ category addresses thermal, visual, and acoustic comfort as well as indoor air quality. Laboratory and field research have directly linked occupants' satisfaction and performance to the building's thermal conditions. Energy reduction goals can be supported while improving thermal satisfaction. For example, providing occupants control over the thermostat or operable windows allows for comfort across a wider range of temperatures.
= LEED v4.1 (2019)
=
On April 2, 2019, the USGBC released LEED v4.1, a new version of the LEED green building program, designed for use with cities, communities and homes. However, LEED v4.1 was never officially balloted.
An update to v4, proposed as of November 22, 2022, took effect on March 1, 2024. Any projects that register under LEED v4 after March 1, 2024 must meet these updated guidelines.
= LEED v5 (Draft, 2023)
=
As of January 2023, USGBC began to develop LEED v5. LEED v5 is the first version of the LEED rating system to be based on the June 2022 Future of LEED principles. The LEED v5 rating system will cover both new construction and existing buildings.
An initial draft version was discussed at Greenbuild 2023. The beta draft of LEED v5 was released for an initial period of public comment on April 3, 2024. Changes were made in response to nearly 6,000 comments. A second public comment period was opened for the revised version, from September 27 to October 28, 2024. The official release of the final version of LEED v5 is expected to occur in 2025. Future updates of the certification system are planned to occur every five years.
LEED v5 reorganizes the credits system and prerequisites, and has a greater focus on decarbonization of buildings. The scorecard expresses three global goals of climate action (worth 50% of the certification points), quality of life (25%) and conservation and ecological restoration (25%) in terms of five principles: decarbonization, ecosystems, equity, health and resilience. One of the reponses to public comments was to emphasize a data-driven approach to Operations and Maintenance by more clearly identifying performance-based credits (80% of points) and decoupling them from strategic credits (20%).
= LEED Canada
=
In 2003, the Canada Green Building Council (CAGBC) received permission to create LEED Canada-NC v1.0, which was based upon LEED-NC 2.0. As of 2021, Canada ranked second in the world (not including the USA) in its number of LEED-certified projects and square feet of space. Buildings in Canada such as Winnipeg's Canadian Museum for Human Rights are LEED certified due to practices including the use of rainwater harvesting, green roofs, and natural lighting.
As of March 18, 2022, the Canada Green Building Council took over direct oversight for LEED™ green building certification of projects in Canada, formerly done by GBCI Canada. CAGBC will continue to work with Green Business Certification Inc. (GBCI) and USGBC while consolidating certification and credentialing for CAGBC's Zero Carbon Building Standards, LEED, TRUE, and Investor Ready Energy Efficiency (IREE). IREE is a model supported by CAGBC and the Canada Infrastructure Bank (CIB) for the verification of proposed retrofit projects.
= Certification process
=
LEED certification is granted by the Green Building Certification Institute (GBCI), which arranges third-party verification of a project's compliance with the LEED requirements. The certification process for design teams consists of the design application, under the purview of the architect and the engineer and documented in the official construction drawings, and the construction application, under the purview of the building contractor and documented during the construction and commissioning of the building.
A fee is required to register the building, and to submit the design and construction applications. Total fees are assessed based on building area, ranging from a minimum of $2,900 to over $1 million for a large project. "Soft" costs – i.e., added costs to the building project to qualify for LEED certification – may range from 1% to 6% of the total project cost. The average cost increase was about 2%, or an extra $3–$5 per square foot.
The application review and certification process is conducted through LEED Online, USGBC's web-based service. The GBCI also utilizes LEED Online to conduct their reviews.
= LEED energy modeling
=
Applicants have the option of achieving credit points by building energy models. One model represents the building as designed, and a second model represents a baseline building in the same location, with the same geometry and occupancy. Depending on location (climate) and building size, the standard provides requirements for heating, ventilation and air-conditioning (HVAC) system type, and wall and window definitions. This allows for a comparison with emphasis on factors that heavily influence energy consumption. The number of points achieved in this credit is proportional to the predicted energy savings.
This method has been criticized for inaccurately predicting actual energy usage. The USGBC admits that "current information indicates that most buildings do not perform as well as design metrics indicate. As a result, building owners might not obtain the benefits promised."
= LEED for Homes rating system
=
The LEED for Homes rating system was first piloted in 2005. It has been available in countries including the U.S., Canada, Sweden, and India. LEED for Homes projects are low-rise residential.
The process of the LEED for Homes rating system differs significantly from the LEED rating system for new construction. Unlike LEED, LEED for Homes requires an on-site inspection. LEED for Homes projects are required to work with either an American or a Canadian provider organization and a green rater. The provider organization helps the project through the process while overseeing the green raters, individuals who conduct two mandatory site inspections: the thermal bypass inspection and the final inspection. The provider and rater assist in the certification process but do not themselves certify the project.
= Professional accreditation
=
In addition to certifying projects pursuing LEED, USGBC's Green Business Certification Inc. (GBCI) offers various accreditations to people who demonstrate knowledge of the LEED rating system, including LEED Accredited Professional (LEED AP), LEED Green Associate, and LEED Fellow.
The Green Building Certification Institute (GBCI) describes its LEED professional accreditation as "demonstrat[ing] current knowledge of green building technologies, best practices" and the LEED rating system, to assure the holder's competency as one of "the most qualified, educated, and influential green building professionals in the marketplace."
Criticism
Critics of LEED certification such as Auden Schendler and Randy Udall have pointed out that the process is slow, complicated, and expensive. In 2005, they published an article titled "LEED is Broken; Let's Fix It", in which they argued that the certification process "makes green building more difficult than it needs to be" and called for changes "to make LEED easier to use and more popular" to better accelerate the transition to green building.
Schendler and Udall also identified a pattern which they call "LEED brain", in which participants may become focused on "point mongering" and pick and choose design elements that don't actually go well together or don't fit local conditions, to gain points. The public relations value of LEED certification begins to drive the development of buildings rather than focusing on design. They give the example of debating whether to add a reflective roof, used to can counter "heat island" effects in urban areas, to a building high in the Rocky Mountains.: 230
A 2012 USA Today review of 7,100 LEED-certified commercial buildings found that designers tended to choose easier points such as using recycled materials, rather than more challenging ones that could increase the energy efficiency of a building.
Critics such as David Owen and Jeff Speck also point out that LEED certification focuses on the building itself, and does not take into account factors such as the location in which the building stands, or how employee commutes may be affected by a relocation. In Green Metropolis (2009), Owen discusses an environmentally-friendly building in San Bruno, California, built by Gap Inc., which was located 16 miles (26 km) from the company's corporate headquarters in downtown San Francisco, and 15 miles (24 km) from Gap's corporate campus in Mission Bay. Although the company added shuttle buses between buildings, "no bus is as green as an elevator".: 232–33 Similarly, in Walkable City (2013), Jeff Speck describes the relocation of the Environmental Protection Agency's Region 7 Headquarters from downtown Kansas City, Missouri, to a LEED-certified building 20 miles (32 km) away in the suburb of Lenexa, Kansas. Kaid Benfield of the Natural Resources Defense Council estimated that the carbon emissions associated with the additional miles driven were almost three times higher than before, a change from 0.39 metric tons per person per month to 1.08 metric tons of carbon dioxide per person per month. Speck writes that "The carbon saved by the new building's LEED status, if any, will be a small fraction of the carbon wasted by its location". Both Speck and Owen make the point that a building-centric standard that doesn't consider location will inevitably undervalue the benefits of people living closer together in cities, compared to the costs of automobile-oriented suburban sprawl.: 221–35
Performance
LEED is a design tool and as such has focused on energy modeling, rather than being a performance-measurement tool that measures actual energy consumption.
LEED uses modeling software to predict future energy use based on intended use. Buildings certified under LEED do not have to prove energy or water efficiency in practice to receive LEED certification points. This has led to criticism of LEED's ability to accurately determine the efficiency of buildings, and concerns about the accuracy of its predictive models.
Research papers provide most of what is known about the performance and effectiveness of LEED. Much of the available research predates 2014, and therefore applies to buildings that were designed under early versions of the LEED rating and certification systems, LEED v3 (2009) or earlier. As pointed out by Newsham et al., many early analyses should be considered as preliminary. Studies should be repeated with longer data history and larger building samples, include newer LEED certified buildings, and clearly identify green-building rating schemes of individual buildings.
Research papers have tended to address performance and effectiveness of LEED in two credit category areas: energy and indoor environment quality (IEQ).
= Energy performance research
=
In 2009, architectural scientist Guy Newsham (et al.) of the National Research Council of Canada (NRC) analyzed a database of 100 LEED certified (v3 or earlier version) buildings. In this study, each building was paired with a conventional "twin" building within the Commercial Building Energy Consumption Survey (CBECS) database according to building type and occupancy. On average, the LEED buildings consumed 18 to 39% less energy by floor area than the conventional buildings. However, 28 to 35% of LEED-certified buildings used more energy. The paper found no correlation between the number of energy points achieved or LEED certification level and measured building performance.
In 2009 physicist John Scofield published an article in response to Newsham et al., analyzing the same database of LEED buildings and arriving at different conclusions. Scofield criticized the earlier analysis for focusing on energy per floor area instead of a total energy consumption. Scofield considered source energy (accounting for energy losses during generation and transmission) as well as site energy, and used area-weighted energy use intensities (EUIs) (energy per unit area per year), when comparing buildings to account for the fact that larger buildings tend to have larger EUIs. Scofield concluded that, collectively, the LEED-certified buildings showed no significant source energy consumption savings or greenhouse gas emission reductions when compared to non-LEED buildings, although they did consume 10–17% less site energy. In 2013 Scofield analyzed 953 New York City office buildings office buildings, of which 21 were LEED-certified, based on publicly available data. Results were mixed. Although LEED-Gold buildings used 20% less source energy, buildings at the Silver and Certified levels used 11 to 15% more source energy, on average, than conventional buildings.
In 2014, architect Gwen Fuertes and engineer Stefano Schiavon developed the first study that analyzes plug loads using LEED-documented data from certified projects. The study compared plug load assumptions made by 92 energy modeling practitioners against ASHRAE and Title 24 requirements, and the evaluation of the plug load calculation methodology used by 660 LEED-CI and 429 LEED-NC certified projects. They found that energy modelers only considered the energy consumption of predictable plug loads, such as refrigerators, computers and monitors. Overall the results suggested a disconnection between assumptions in the models and the actual performance of buildings.
Energy modeling might be a source of error during the LEED design phase. Engineers Christopher Stoppel and Fernanda Leite evaluated the predicted and actual energy consumption of two twin buildings using the energy model during the LEED design phase and the utility meter data after one year of occupancy. The study's results suggest that mechanical systems turnover and occupancy assumptions significantly differ from predicted to actual values.
= IEQ performance research
=
The Centers for Disease Control and Prevention (CDC) defines indoor environmental quality (IEQ) as "the quality of a building's environment in relation to the health and wellbeing of those who occupy space within it." The USGBC includes the following considerations for attaining IEQ credits: indoor air quality, the level of volatile organic compounds (VOC), lighting, thermal comfort, and daylighting and views. In consideration of a building's indoor environmental quality, published studies have also included factors such as: acoustics, building cleanliness and maintenance, colors and textures, workstation size, ceiling height, window access and shading, surface finishes, furniture adaptability and comfort.
IEQ-related studies provide contrasting results: the first used occupant survey results in 65 LEED buildings and 79 non-LEED buildings and concluded that occupants of both groups had equal satisfaction with the building overall and with the workspace.
The second IEQ study used occupant interviews and physical site measurements at 12 LEED buildings to report superior indoor environment performance compared with 12 similar non-certified buildings.
In 2013, a paper published by Schiavon and architectural physicist Sergio Altamonte studied occupant IEQ satisfaction in LEED and non-LEED buildings. Using occupant surveys from the Center for the Built Environment at Berkeley database, 65 LEED-certified and 79 non-LEED buildings were analyzed for 15 IEQ-related factors. These factors include the ease of interaction, building cleanliness, the comfort of furnishing, the amount of light, building maintenance, colors and textures, workplace cleanliness, the amount of space, furniture adjustability, visual comfort, air quality, visual privacy, noise, temperature, and sound privacy. The results showed occupants tend to be slightly more satisfied in LEED buildings for the air quality and slightly more dissatisfied with the amount of light. The overall finding was that there was no significant influence of LEED certification on occupant satisfaction in consideration of the overall building and workspace ratings. The paper noted that the data may not be representative of the entire building stock and a randomized approach was not used in the data assessment.
Based on similar dataset (21,477 occupants) in 2013, Schiavon and Altomonte found that occupants have equivalent satisfaction levels in LEED and non-LEED buildings when evaluated independently from the following factors: office type, spatial layout, distance from windows, building size, gender, age, type of work, time at workspace, and weekly working hours. LEED certified buildings may provide higher satisfaction in open spaces than in enclosed offices, in smaller buildings than in larger buildings, and to occupants having spent less than one year in their workspaces rather than to those who have used their workspace longer. The study also notes that the positive value of LEED certification from the aspect of occupant satisfaction may tend to decrease with time.
In 2015, a study on indoor environmental quality and the potential health benefits of green-certified buildings was developed by environmental health scientist Joseph Allen (et al.) showing that green buildings provide better indoor environmental quality with direct benefits to human health of occupants of those buildings in comparison to non-green buildings. One of the limitations of the study was the use of subjective health performance indicators since there is a lack of definition on such indicators by current studies.
Newsham et al. published a detailed study on IEQ and LEED buildings in August 2013. Field studies and post-occupancy evaluations (POE) were performed in 12 green and 12 conventional buildings across Canada and the northern United States. On-site, 974 workstations were measured for thermal conditions, air quality, acoustics, lighting, workstation size, ceiling height, window access and shading, and surface finishes. Responses were positive in the areas of environmental satisfaction, satisfaction with thermal conditions, satisfaction with outside views, aesthetic appearance, reduced disturbance from HVAC noise, workplace image, night-time sleep quality, mood, physical symptoms, and reduced number of airborne particulates. The results showed green buildings exhibited superior performance compared with similar conventional buildings.
A 2017 study by Altomonte, Schiavon, et al. investigated whether a green rating itself leads to higher occupant satisfaction with IEQ. Based on the analysis of a subset of the CBE Occupant IEQ including 11,243 responses from 93 LEED-certified office buildings, this study found that the achievement of a specific IEQ credit did not substantially increase the satisfaction with the corresponding IEQ factor. In addition, the rating level and version of the certification had no impact on workplace satisfaction. There are some possible explanations. Many intervening factors in the time between design and occupancy can alter the existence or performance of the strategies that LEED awarded. IEQ certification metrics also face the challenges from substantial differences that characterize the modern workplace in terms of spatial needs, task requirements, users' characteristics, and disciplines of product design and marketing. Survey participants may also misinterpret the satisfaction with an IEQ parameter, or bias with personal attitudes.
The daylight credit was updated in LEED v4 to include a simulation option for daylight analysis that uses spatial daylight autonomy (SDA) and annual sunlight exposure (ASE) metrics to evaluate daylight quality in LEED projects. SDA is a metric that measures the annual sufficiency of daylight levels in interior spaces and ASE describes the potential for visual discomfort by direct sunlight and glare. These metrics are approved by the Illuminating Engineering Society of North America (IES) and codified in the LM-83-12 standard. LEED recommends a minimum of 300 lux for at least 50% of total occupied hours of the year for at least 55% of the occupied floor area. The threshold recommended by LEED for ASE is that no more than 10% of regularly occupied floor area can be exposed to more than 1000 lux of direct sunlight for more than 250 hours per year. Additionally, LEED requires window shades to be closed when more than 2% of a space is subject to direct sunlight above 1000 lux. According to building scientist Christopher Reinhart, the direct sunlight requirement is a very stringent approach that can discourage good daylight design. Reinhart proposed the application of the direct sunlight criterion only in spaces that require stringent control of sunlight (e.g. desks, white boards, etc.).
= Innovation in design research
=
The rise in LEED certification also brought forth a new era of construction and building research and ideation. Architects and designers have begun stressing the importance of occupancy health over high efficiency within new construction and have been trying to engage in more conversations with health professionals. Along with this, they also create buildings to perform better and analyze performance data to upkeep the process. Another way LEED has affected research is that designers and architects focus on creating spaces that are modular and flexible to ensure a longer lifespan while simultaneously sourcing products that are resilient through consistent use.
Innovation in LEED architecture is linked with new designs and high-quality construction. One example is use of nanoparticle technology for consolidation and conservation effects in cultural heritage buildings. This practice began with the use of calcium hydroxide nano-particles in porous structures to improve mechanical strength. Titanium, silica, and aluminum-based compounds may also be used.
Material technology and construction techniques could be among first issues to consider in building design. For the facade of high-rise buildings, such as the Empire State Building, the surface area provides opportunities for design innovation. VOC released from construction materials into the air is another challenge to address.
In Milan, a university-corporate partnership sought to produce semi-transparent solar panels to take the place of ordinary windows in glass-facade high-rise buildings. Similar concepts are under development elsewhere, with considerable market potential.
The Manzara Adalar skyscraper project in Istanbul, designed by Zaha Hadid, saw considerable innovation through the use of communal rooms, outdoor spaces, and natural lighting as part of the Urban Transformation Project of the Kartal port region.
Extreme structures that have received LEED certification include: Amorepacific Headquarters in Seoul by David Chipperfield Architects; Project: Brave New World: SFMOMA by Snøhetta in San Francisco, California; Project: UFO in a Sequinned Dress: Centro Botín in Santander by Renzo Piano; Building Workshop in Zusammenarbeit with Luis Vidal + Architects, in Santander, Spain; and Project: Vertical factory: Office building in London by Allford Hall Monaghan Morris in London.
= Other related research notes
=
A 2003 analysis of the savings from green building found in a review of 60 LEED buildings that these buildings were, on average, 25–30% more energy efficient. It also attributed substantial benefits to the increased productivity from the better ventilation, temperature control, lighting control, and reduced indoor air pollution.
From a financial perspective, several 2008 studies found that LEED for-rent office spaces generally charged higher rent and had higher occupancy rates. Analysis of CoStar Group property data estimated the extra cost for the minimum benefit at 3%, with an additional 2.5% for silver-certified buildings. More recent studies have confirmed these earlier findings in that certified buildings achieve significantly higher rents, sale prices and occupancy rates as well as lower capitalization rates, potentially reflecting lower investment risk.
Because LEED focuses on the design of the building and not on its actual energy consumption, it has been suggested that LEED buildings should be tracked to discover whether the potential energy savings from the design are being used in practice.
Benefits and disadvantages
LEED-certified buildings are intended to use resources more efficiently when compared to conventional structures inspected only to mandatory building codes. However, analysis of energy and water use data from New York City shows that LEED certification does not necessarily make a building more energy or water efficient.
Often, when a LEED rating is pursued, the cost of initial design and construction rises. There may be a lack of abundant availability of manufactured building components that meet LEED specifications. There are also added costs in USGBC correspondence, LEED design-aide consultants, and the hiring of the required Commissioning Authority, which are not in themselves necessary for an environmentally responsible project unless seeking LEED certification.
Proponents argue that these higher initial costs can be mitigated by the savings incurred over time due to projected lower-than-industry-standard operational costs typical of a LEED certified building. This life cycle costing is a method for assessing the total cost of ownership, taking into account all costs of acquiring, owning and operating, and the eventual disposal of a building. Additional economic payback may come in the form of employee productivity gains incurred as a result of working in a healthier environment. Studies suggest that an initial up-front investment of 2% extra yields over ten times that initial investment over the life cycle of the building.
The USGBC has stated support for Architecture 2030, an effort that has set a goal for a building to operate with no greenhouse-gas-emitting energy by 2030. In progression toward this, from LEED's existing certifications, the Living Building Challenge (LBC) is currently the most stringent sustainable design protocol. It sets 20 imperatives that compel building owners, designers, operators and tenants beyond current LEED rating levels.
LEED is a design tool and not a performance measurement tool. It is also not yet climate-specific, although the newest version hopes to partially address this. Because of this, designers may be encouraged to make design choices to gain a LEED point, even though this choice is not optimal for the specific project. Additionally, LEED is not energy-specific; it only measures overall performance, allowing builders to choose how to achieve points under various categories. A USA Today article from 2012 noted that a review of 7,100 certified commercial building projects suggested that they targeted cheap and easy green points, such as creating healthy spaces and providing educational displays in the building. Few builders adopted renewable energy because of the initial cost of installation. Builders game the rating system and use certain performances to compensate for the others, and energy conservation becomes the weakest part in the overall evaluation.
LEED has been developed and continuously modified by workers in the green building industry, especially in the ten largest metro areas in the U.S.; however, LEED certified buildings have been slower to penetrate small and middle markets. There has been criticism that the LEED rating system is not sensitive and does not vary enough with regard to local environmental conditions. For instance, a building in Maine would receive the same credit as a building in Arizona for water conservation, though the principle is more important in the latter case. Another complaint is that certification costs could be better used to make the project more sustainable. Many critics have noted that compliance and certification costs have grown faster than staff support from the USGBC.
Incentive programs
Many federal, state, and local governments and school districts have adopted various types of LEED initiatives and incentives. LEED incentive programs can include tax credits, tax breaks, density zoning bonuses, reduced fees, priority or expedited permitting, free or reduced-cost technical assistance, grants and low-interest loans.
Cincinnati, Ohio, adopted a measure providing an automatic 100% real property tax exemption of the assessed property value for newly constructed or rehabilitated commercial or residential properties that earn a minimum of LEED Certified. In Nevada, construction materials for a qualifying LEED building are exempt from local taxes. Pieces of construction that are deemed 'inseparable parts', such as concrete or drywall, qualify. Maryland's High Performance Buildings Act (2008) requires all new public construction and renovations greater than 7,500 sq ft (700 m2) to meet LEED Silver standard or two Green Globes. Between 2009 and 2014, the state is required to fund half of the required additional cost for public school construction or renovation to attain that standard.
In June 2013, USGBC announced a promotion called LEED Earth that refunds LEED certification fees to the first LEED-certified project in a country that doesn't have one.
Delaware currently has a Green Home Rebate incentive program that provides $1,000 – $4,500 rebates to certain new homes that achieve LEED certification.
Hawaii also features a Priority Permit Processing for Green Buildings which requires each county agency that issues building, construction, or development-related permits to create a policy to provide free priority processing of permit applications for construction projects that integrate energy and environmental design building standards. Such buildings can qualify after being rated at LEED silver or similar a certification.
Notable certifications
= Directories of LEED-certified projects
=
The USGBC and Canada Green Building Council maintain online directories of U.S. LEED-certified and LEED Canada-certified projects. In 2012 the USGBC launched the Green Building Information Gateway (GBIG) to connect green building efforts and projects worldwide. It provides searchable access to a database of activities, buildings, places and collections of green building-related information from many sources and programs, including LEED projects.
A number of sites including the Canada Green Building Council (CaGBC) Project Database list resources relating to LEED buildings in Canada.
= Platinum certification
=
The Philip Merrill Environmental Center in Annapolis, Maryland was the first building to receive a LEED-Platinum rating, version 1.0. It was recognized as one of the "greenest" buildings constructed in the U.S. in 2001 at the time it was built. Sustainability issues ranging from energy use to material selection were given serious consideration throughout design and construction of this facility.
The first LEED platinum-rated building outside the U.S. is the CII Sohrabji Godrej Green Business Centre (CII GBC) in Hyderabad, India, certified in 2003 under LEED version 2.0.
The Coastal Maine Botanical Gardens Bosarge Family Education Center, completed in 2011, achieved LEED Platinum certification and became known as "Maine's greenest building".
In October 2011 Apogee Stadium at the University of North Texas became the first newly built stadium in the country to achieve Platinum-level certification.
In Pittsburgh, Sota Construction Services' corporate headquarters earned a LEED Platinum rating in 2012 with one of the highest scores by percentage of total points earned in any LEED category, making it one of the top ten greenest buildings in the world. It featured a super-efficient thermal envelope using cob walls, a geothermal well, radiant heat flooring, a roof-mounted solar panel array, and daylighting features.
When it received LEED Platinum in 2012, Manitoba Hydro Place in downtown Winnipeg was the most energy-efficient office tower in North America and the only office tower in Canada with a Platinum rating. The office tower employs south-facing winter gardens to capture solar energy during the harsh Manitoba winters and uses glass extensively to maximize natural light.
= Gold certification
=
Pittsburgh's 1,500,000-square-foot (140,000 m2) David L. Lawrence Convention Center was the first Gold LEED-certified convention center and largest "green" building in the world when it opened in 2003. It earned Platinum certification in 2012, becoming the only convention center with certifications for both the original building and new construction.
The Cashman Equipment building in Henderson, Nevada became the first construction equipment dealership to receive LEED gold certification in 2009. The headquarters of the Caterpillar brand, it is the largest LEED industrial complex in Nevada.
Around 2010, the Empire State Building underwent a $550 million renovation, including $120 million towards energy efficiency and eco-friendliness. It received a gold LEED rating in 2011, and at the time was the tallest LEED-certified building in the United States.
In July 2014, the San Francisco 49ers' Levi's Stadium became the first NFL venue to earn a LEED Gold certification. The Minnesota Vikings' U.S. Bank Stadium equaled this feat with a Gold certification in Building Design and Construction in 2017 as well as a Platinum certification in Operations and Maintenance in 2019, a first for any professional sports stadium.
In San Francisco's Presidio, the Letterman Digital Arts Center earned a Gold certification in 2013. It was built almost entirely from the recycled remains of the Letterman Army Hospital, which previously occupied the site.
Although originally constructed in 1973, Willis Tower a commercial office building located in Chicago, adopted and implemented a new set of sustainable practices in 2018, earning the property LEED Gold certification under the LEED for Existing Buildings: O&M™ rating system. This adoption earned Willis Tower the ranking of the tallest LEED-certified building in the United States.
= Multiple certifications
=
In September 2012, The Crystal in London became the world's first building awarded LEED Platinum and BREEAM Outstanding status. It generates its own energy using solar power and ground-source heat pumps and utilizes extensive KNX technologies to automate the building's environmental controls.
In Pittsburgh, the visitor's center of Phipps Conservatory & Botanical Gardens received Silver certification, its Center for Sustainable Landscapes received a Platinum certification and fulfilled the Living Building Challenge for net-zero energy, and its greenhouse facility received Platinum certification. It may be the only greenhouse in the world to have achieved such a rating.
Torre Mayor, at one time the tallest building in Mexico, achieved LEED Gold certification for an existing building and eventually reached Platinum certification under LEED v4.1. The building is designed to withstand 8.5-magnitude earthquakes, and has enhanced many of its systems including air handling and water treatment.
In 2017, Kaiser Permanente, the largest integrated health system in the United States, opened California's first LEED Platinum certified hospital, the Kaiser Permanente San Diego Medical Center. By 2020, Kaiser Permanente owned 40 LEED certified buildings.
Its construction of LEED buildings was one of multiple initiatives that enabled Kaiser Permanente to report net-zero carbon emissions in 2020.
As of 2022, University of California, Irvine had 32 LEED-certified buildings across the campus. 21 were LEED Platinum certified, and 11 were LEED Gold.
See also
Notes and references
= Explanatory notes
=
= Citations
=
External links
U.S. Green Building Council (USGBC)
About LEED at USGBC
LEED rating system at USGBC
LEED Project Directory at USGBC
EXPLORE GREEN BUILDINGS GBIG Green Building Information Gateway by USGBC
Canada Green Building Council (CGBC)
Project Database for CGBC- Source: Leed
Leed was a carbonated lemonade soft drink sold in the middle and late 20th century.
It was produced and distributed by Coca-Cola Amatil in New Zealand, Australia, the United Kingdom and Fiji. In 1984, Leed was discontinued and replaced by the more widely known Sprite brand. Accompanying this change was also a new recipe.
Leed Lemon Soda Squash was a variant which was replaced by Mello Yello in the early 1980s.
See also
List of defunct consumer brands
List of lemonade topics
Drink portal
References
Kata Kunci Pencarian:
6.5
6.473
No More Posts Available.
No more pages to load.
