• Source: Nissan CG engine

The CG engine is a 1.0 L, 1.3 L or 1.35 L straight-4 piston engine from Nissan's Aichi Kikai division. It is an aluminum DOHC 16-valve design. The engine was developed for use in the Nissan Micra/March K11 series. All engines featured multi-point fuel injection. Redline is at 7300 rpm.
This compact, reliable, lightweight and fuel-efficient motor has also found life in many Nissan Forklift models.
The breakdown of the engine code is as follows:

CG - Clean Green
10, 13 or A3 - 1.0, 1.3 or 1.35 Litres
D - Double Overhead Cam (DOHC)
E - Multi-port Fuel Injection




CG10DE


The 1.0 L (998 cc) CG10DE was built from the introduction of the Nissan Micra K11 in January 1992
until it was replaced by the K12 series in 2002.




CG13DE



The 1.3 L (1,275 cc) CG13DE was built from 1992
and continues to power the current (2007) model K11 in Taiwan. In 2000 it was replaced by the CGA3DE in most countries.




CGA3DE


The 1.3 L (1,348 cc) CGA3DE was built between November 1999 and 2002. The engine produced 85 PS (63 kW) @ 6000 rpm and 120 N⋅m (89 lb⋅ft) @ 4000 rpm. This engine, although considered a 1.4 in the European market, was still marketed as a 1.3 engine in Japan due to the cubic capacity being 1.3 L (1,348 cc).
The x-alpha spec Z10 Nissan Cube was made from May 2001 to September 2002.
In October 2002 the CG engines were replaced with CR engines in Japan.




Engine reference


The CG engine was manufactured in the following versions:




See also


Nissan Micra
Nissan Cube
List of Nissan engines




References

Kata Kunci Pencarian:

• Honda Accord
• Chevrolet Captiva
• Nissan CG engine
• Nissan CR engine
• List of Nissan engines
• Nissan (disambiguation)
• Nissan VQ engine
• Nissan TD engine
• Nissan VG engine
• Nissan HR engine
• Nissan A engine
• Nissan PR engine