• Source: OMAP

OMAP (Open Multimedia Applications Platform) is a family of image/video processors that was developed by Texas Instruments. They are proprietary system on chips (SoCs) for portable and mobile multimedia applications. OMAP devices generally include a general-purpose ARM architecture processor core plus one or more specialized co-processors. Earlier OMAP variants commonly featured a variant of the Texas Instruments TMS320 series digital signal processor.
The platform was created after December 12, 2002, as STMicroelectronics and Texas Instruments jointly announced an initiative for Open Mobile Application Processor Interfaces (OMAPI) intended to be used with 2.5 and 3G mobile phones, that were going to be produced during 2003. (This was later merged into a larger initiative and renamed the MIPI Alliance.) The OMAP was Texas Instruments' implementation of this standard. (The STMicroelectronics implementation was named Nomadik.)
OMAP enjoyed some success in the smartphone and tablet market until 2011 when it lost ground to Qualcomm Snapdragon. On September 26, 2012, Texas Instruments announced that they would wind down their operations in smartphone and tablet oriented chips and focus on embedded platforms instead. On November 14, 2012, Texas Instruments announced they would cut 1,700 jobs due to their shift from mobile to embedded platforms. The last OMAP5 chips were released in Q2 2013.




OMAP family



The OMAP family consists of three product groups classified by performance and intended application:

high-performance applications processors
basic multimedia applications processors
integrated modem and applications processors
Further, two main distribution channels exist, and not all parts are available in both channels. The genesis of the OMAP product line is from partnership with cell phone vendors, and the main distribution channel involves sales directly to such wireless handset vendors. Parts developed to suit evolving cell phone requirements are flexible and powerful enough to support sales through less specialized catalog channels; some OMAP 1 parts, and many OMAP 3 parts, have catalog versions with different sales and support models. Parts that are obsolete from the perspective of handset vendors may still be needed to support products developed using catalog parts and distributor-based inventory management.




= High-performance applications processors

=
These are parts originally intended for use as application processors in smartphones, with processors powerful enough to run significant operating systems (such as Linux, FreeBSD, Android or Symbian), support connectivity to personal computers, and support various audio and video applications.



OMAP 1

The OMAP 1 family started with a TI-enhanced ARM925 core (ARM925T), and then changed to a standard ARM926 core. It included many variants, most easily distinguished according to manufacturing technology (130 nm except for the OMAP171x series), CPU, peripheral set, and distribution channel (direct to large handset vendors, or through catalog-based distributors). In March 2009, the OMAP1710 family chips are still available to handset vendors.
Products using OMAP 1 processors include hundreds of cell phone models, and the Nokia 770 Internet tablets.

OMAP1510 – 168 MHz ARM925T (TI-enhanced) + C55x DSP
OMAP161x – 204 MHz ARM926EJ-S + C55x DSP, 130 nm technology
OMAP162x – 204 MHz ARM926EJ-S + C55x DSP + 2 MB internal SRAM, 130 nm technology
OMAP171x – 220 MHz ARM926EJ-S + C55x DSP, low-voltage 90 nm technology
OMAP5910 – catalog availability version of OMAP 1510
OMAP5912 – catalog availability version of OMAP1621 (or OMAP1611b in older versions)



OMAP 2

These parts were only marketed to handset vendors. Products using these include both Internet tablets and mobile phones:

OMAP2431 – 330 MHz ARM1136 + 220 MHz C64x DSP
OMAP2430 – 330 MHz ARM1136 + 220 MHz C64x DSP + PowerVR MBX lite GPU, 90 nm technology
OMAP2420 – 330 MHz ARM1136 + 220 MHz C55x DSP + PowerVR MBX GPU, 90 nm technology



OMAP 3

The 3rd generation OMAP, the OMAP 3 is broken into 3 distinct groups: the OMAP34x, the OMAP35x, and the OMAP36x. OMAP34x and OMAP36x are distributed directly to large handset (such as cell phone) manufacturers. OMAP35x is a variant of OMAP34x intended for catalog distribution channels. The OMAP36x is a 45 nm version of the 65 nm OMAP34x with higher clock speed.
The OMAP 3611 found in devices like the Bookeen's Cybook Odyssey is a licensed crippled version of the OMAP 3621, both are the same silicon (as marking are the same) but officially the 3611 was sold to be only able to drive e-Ink screen and does not have access to IVA & DSP.
The video technology in the higher end OMAP 3 parts is derived in part from the DaVinci product line, which first packaged higher end C64x+ DSPs and image processing controllers with ARM9 processors last seen in the older OMAP 1 generation or ARM Cortex-A8.
Not highlighted in the list below is that each OMAP 3 SoC has an "Image, Video, Audio" (IVA2) accelerator. These units do not all have the same capabilities. Most devices support 12 megapixel camera images, though some support 5 or 3 megapixels. Some support HD imaging.



OMAP 4


The OMAP 4 line consists of the OMAP 4430, OMAP 4460 (formerly named 4440), and OMAP 4470. The 4th generation OMAPs have a dual-core ARM Cortex-A9 CPU with two ARM Cortex-M3 cores, as part of the "Ducati" sub-system for off-loading low-level tasks. The OMAP 4430 was the SoC used in Google Glass.
OMAP 4 uses ARM Cortex-A9's with ARM's SIMD engine (Media Processing Engine, aka NEON) which in some cases may have a significant performance advantage over Nvidia Tegra 2's ARM Cortex-A9s with non-vector floating point units. It also uses a dual-channel LPDDR2 memory controller compared to Nvidia Tegra 2's single-channel memory controller.
All OMAP 4 processors come with an IVA3 multimedia hardware accelerator with a programmable DSP that enables 1080p Full HD and multi-standard video encoding and decoding.
The 4430 and 4460 use a PowerVR SGX540 graphics processing unit (GPU). The 4430's GPU runs at a clock frequency of 304 Mhz, and the 4460's GPU runs at 384 MHz.
The 4470 has a PowerVR SGX544 GPU that supports DirectX 9 that enables it for use in Windows 8. It also has a dedicated 2D graphics core for increased power efficiency up to 50-90%.



OMAP 5

The 5th generation OMAP, OMAP 5 SoC uses a dual-core ARM Cortex-A15 CPU with two additional Cortex-M4 cores to offload the A15s in less computationally intensive tasks to increase power efficiency, two PowerVR SGX544MP graphics cores and a dedicated TI 2D BitBlt graphics accelerator, a multi-pipe display sub-system and a signal processor. They respectively support 24 and 20 megapixel cameras for front and rear 3D HD video recording. The chip also supports up to 8 GB of dual channel LPDDR2/DDR3 memory, output to four HD 3D displays and 3D HDMI 1.4 video output. OMAP 5 also includes three USB 2.0 ports, one lowspeed USB 3.0 OTG port and a SATA 2.0 controller.




= Basic multimedia applications processors

=

These are marketed only to handset manufacturers. They are intended to be highly integrated, low cost chips for consumer products. The OMAP-DM series are intended to be used as digital media coprocessors for mobile devices with high megapixel digital still and video cameras. These OMAP-DM chips incorporate both an ARM processor and an Image Signal Processor (ISP) to accelerate processing of camera images.

OMAP310 – ARM925T
OMAP331 – ARM926
OMAP-DM270 – ARM7 + C54x DSP
OMAP-DM299 – ARM7 + Image Signal Processor (ISP) + stacked mDDR SDRAM
OMAP-DM500 – ARM7 + ISP + stacked mDDR SDRAM
OMAP-DM510 – ARM926 + ISP + 128 MB stacked mDDR SDRAM
OMAP-DM515 – ARM926 + ISP + 256 MB stacked mDDR SDRAM
OMAP-DM525 – ARM926 + ISP + 256 MB stacked mDDR SDRAM




= Integrated modem and applications processors

=

These are marketed only to handset manufacturers. Many of the newer versions are highly integrated for use in very low cost cell phones.

OMAPV1035 – single-chip EDGE (was discontinued in 2009 as TI announced baseband chipset market withdrawal).
OMAPV1030 – EDGE digital baseband
OMAP850 – 200 MHz ARM926EJ-S + GSM/GPRS digital baseband + stacked EDGE co-processor
OMAP750 – 200 MHz ARM926EJ-S + GSM/GPRS digital baseband + DDR Memory support
OMAP733 – 200 MHz ARM926EJ-S + GSM/GPRS digital baseband + stacked SDRAM
OMAP730 – 200 MHz ARM926EJ-S + GSM/GPRS digital baseband + SDRAM Memory support
OMAP710 – 133 MHz ARM925 + GSM/GPRS digital baseband




= OMAP L-1x

=
The OMAP L-1x parts are marketed only through catalog channels, and have a different technological heritage than the other OMAP parts. Rather than deriving directly from cell phone product lines, they grew from the video-oriented DaVinci product line by removing the video-specific features while using upgraded DaVinci peripherals. A notable feature is use of a floating point DSP, instead of the more customary fixed point one.
The Hawkboard uses the OMAP-L138

OMAP-L137 – 300 MHz ARM926EJ-S + C674x floating point DSP
OMAP-L138 – 300 MHz ARM926EJ-S + C674x floating point DSP




Products using OMAP processors


Many mobile phones released during early 21st century have used OMAP SoCs, including the Nokia 3230, N9, N90, N91, N92, N95, N82, E61, E62, E63 and E90 mobile phones, as well as the Nokia 770, N800, N810 and N900 Internet tablets, Motorola Droid, Droid X, and Droid 2, and some early Samsung Galaxy devices, like Samsung Galaxy Tab 2 7.0 and Galaxy S II variant GT-I9100G.
The OMAP3430 is used in the Palm Pre, Pandora, and Touch Book. Other devices that use OMAP processors include Sony Ericsson's Satio (Idou) and Vivaz, most Samsung phones running Symbian (including Omnia HD), the Nook Color, some Archos tablets (such as Archos 80 gen 9 and Archos 101 gen 9), Kindle Fire HD, Blackberry Playbook, Kobo Arc, and B&N Nook HD.
Some all-in-one smart displays use OMAP 4 SoCs, including the Viewsonic VSD220, which uses an OMAP 4430.
OMAP SoCs are also used as the basis for a number of hobbyist, prototyping and evaluation boards, such as the BeagleBoard, PandaBoard, OMAP3 Board, Gumstix and Presonus digital mixing boards
Motorola MOTOTRBO 2. generation radios use the OMAP-L132 or OMAP-L138 secure CPU.




Similar platforms


A31 by AllWinner
Apple silicon by Apple
ARMADA (SoC) 5xx/6xx/15xx by Marvell Technology Group
Atom by Intel
Exynos by Samsung
i.MX by Freescale Semiconductor, later models produced by NXP
Jaguar and Puma by AMD
K3Vx/Kirin by HiSilicon
MTxxxx by MediaTek
Nomadik by STMicroelectronics
NovaThor by ST-Ericsson
OCTEON by Cavium
R-Car by Renesas
RK3xxx by Rockchip
Snapdragon, by Qualcomm, the only competing product which also features a DSP unit, the Qualcomm Hexagon
Swift (SoC) by Philips
Tegra by Nvidia
TI Sitara ARM Processor SoC family
VideoCore by Broadcom




See also


Comparison of ARMv7-A cores - ARM
Comparison of ARMv8-A cores - ARM
Distributed Codec Engine (libcde) – a Texas Instruments API for the video codec engine in OMAP based embedded systems
HiSilicon – by Huawei
OpenMAX IL (Open Media Acceleration Integration Layer) – a royalty-free cross-platform media abstraction API from the Khronos Group




References






External links


Linux OMAP Mailing List Archive
OMAP Application Processors
OMAP3 Boards
OMAP4 Boards
OMAPpedia
OMAPWorld

Kata Kunci Pencarian:

• Nokia Lumia 800
• Qualcomm Snapdragon
• Maemo
• Arsitektur ARM
• WebM
• Google Glass
• BlackBerry PlayBook
• Nokia N70
• Nokia N95
• Daftar contoh skala semikonduktor
• OMAP
• TMS320
• Nokia 6680
• ARM9
• WebM
• 65 nm process
• Orange SPV
• Remi El-Ouazzane
• ARM Cortex-M
• PowerVR