• Source: Stemming

In linguistic morphology and information retrieval, stemming is the process of reducing inflected (or sometimes derived) words to their word stem, base or root form—generally a written word form. The stem need not be identical to the morphological root of the word; it is usually sufficient that related words map to the same stem, even if this stem is not in itself a valid root. Algorithms for stemming have been studied in computer science since the 1960s. Many search engines treat words with the same stem as synonyms as a kind of query expansion, a process called conflation.
A computer program or subroutine that stems word may be called a stemming program, stemming algorithm, or stemmer.




Examples


A stemmer for English operating on the stem cat should identify such strings as cats, catlike, and catty. A stemming algorithm might also reduce the words fishing, fished, and fisher to the stem fish. The stem need not be a word, for example the Porter algorithm reduces argue, argued, argues, arguing, and argus to the stem argu.




History


The first published stemmer was written by Julie Beth Lovins in 1968. This paper was remarkable for its early date and had great influence on later work in this area. Her paper refers to three earlier major attempts at stemming algorithms, by Professor John W. Tukey of Princeton University, the algorithm developed at Harvard University by Michael Lesk, under the direction of Professor Gerard Salton, and a third algorithm developed by James L. Dolby of R and D Consultants, Los Altos, California.
A later stemmer was written by Martin Porter and was published in the July 1980 issue of the journal Program. This stemmer was very widely used and became the de facto standard algorithm used for English stemming. Dr. Porter received the Tony Kent Strix award in 2000 for his work on stemming and information retrieval.
Many implementations of the Porter stemming algorithm were written and freely distributed; however, many of these implementations contained subtle flaws. As a result, these stemmers did not match their potential. To eliminate this source of error, Martin Porter released an official free software (mostly BSD-licensed) implementation of the algorithm around the year 2000. He extended this work over the next few years by building Snowball, a framework for writing stemming algorithms, and implemented an improved English stemmer together with stemmers for several other languages.
The Paice-Husk Stemmer was developed by Chris D Paice at Lancaster University in the late 1980s, it is an iterative stemmer and features an externally stored set of stemming rules. The standard set of rules provides a 'strong' stemmer and may specify the removal or replacement of an ending. The replacement technique avoids the need for a separate stage in the process to recode or provide partial matching. Paice also developed a direct measurement for comparing stemmers based on counting the over-stemming and under-stemming errors.




Algorithms



There are several types of stemming algorithms which differ in respect to performance and accuracy and how certain stemming obstacles are overcome.
A simple stemmer looks up the inflected form in a lookup table. The advantages of this approach are that it is simple, fast, and easily handles exceptions. The disadvantages are that all inflected forms must be explicitly listed in the table: new or unfamiliar words are not handled, even if they are perfectly regular (e.g. cats ~ cat), and the table may be large. For languages with simple morphology, like English, table sizes are modest, but highly inflected languages like Turkish may have hundreds of potential inflected forms for each root.
A lookup approach may use preliminary part-of-speech tagging to avoid overstemming.




= The production technique

=
The lookup table used by a stemmer is generally produced semi-automatically. For example, if the word is "run", then the inverted algorithm might automatically generate the forms "running", "runs", "runned", and "runly". The last two forms are valid constructions, but they are unlikely..




= Suffix-stripping algorithms

=
Suffix stripping algorithms do not rely on a lookup table that consists of inflected forms and root form relations. Instead, a typically smaller list of "rules" is stored which provides a path for the algorithm, given an input word form, to find its root form. Some examples of the rules include:

if the word ends in 'ed', remove the 'ed'
if the word ends in 'ing', remove the 'ing'
if the word ends in 'ly', remove the 'ly'
Suffix stripping approaches enjoy the benefit of being much simpler to maintain than brute force algorithms, assuming the maintainer is sufficiently knowledgeable in the challenges of linguistics and morphology and encoding suffix stripping rules. Suffix stripping algorithms are sometimes regarded as crude given the poor performance when dealing with exceptional relations (like 'ran' and 'run'). The solutions produced by suffix stripping algorithms are limited to those lexical categories which have well known suffixes with few exceptions. This, however, is a problem, as not all parts of speech have such a well formulated set of rules. Lemmatisation attempts to improve upon this challenge.
Prefix stripping may also be implemented. Of course, not all languages use prefixing or suffixing.



Additional algorithm criteria

Suffix stripping algorithms may differ in results for a variety of reasons. One such reason is whether the algorithm constrains whether the output word must be a real word in the given language. Some approaches do not require the word to actually exist in the language lexicon (the set of all words in the language). Alternatively, some suffix stripping approaches maintain a database (a large list) of all known morphological word roots that exist as real words. These approaches check the list for the existence of the term prior to making a decision. Typically, if the term does not exist, alternate action is taken. This alternate action may involve several other criteria. The non-existence of an output term may serve to cause the algorithm to try alternate suffix stripping rules.
It can be the case that two or more suffix stripping rules apply to the same input term, which creates an ambiguity as to which rule to apply. The algorithm may assign (by human hand or stochastically) a priority to one rule or another. Or the algorithm may reject one rule application because it results in a non-existent term whereas the other overlapping rule does not. For example, given the English term friendlies, the algorithm may identify the ies suffix and apply the appropriate rule and achieve the result of friendl. Friendl is likely not found in the lexicon, and therefore the rule is rejected.
One improvement upon basic suffix stripping is the use of suffix substitution. Similar to a stripping rule, a substitution rule replaces a suffix with an alternate suffix. For example, there could exist a rule that replaces ies with y. How this affects the algorithm varies on the algorithm's design. To illustrate, the algorithm may identify that both the ies suffix stripping rule as well as the suffix substitution rule apply. Since the stripping rule results in a non-existent term in the lexicon, but the substitution rule does not, the substitution rule is applied instead. In this example, friendlies becomes friendly instead of friendl'.
Diving further into the details, a common technique is to apply rules in a cyclical fashion (recursively, as computer scientists would say). After applying the suffix substitution rule in this example scenario, a second pass is made to identify matching rules on the term friendly, where the ly stripping rule is likely identified and accepted. In summary, friendlies becomes (via substitution) friendly which becomes (via stripping) friend.
This example also helps illustrate the difference between a rule-based approach and a brute force approach. In a brute force approach, the algorithm would search for friendlies in the set of hundreds of thousands of inflected word forms and ideally find the corresponding root form friend. In the rule-based approach, the three rules mentioned above would be applied in succession to converge on the same solution. Chances are that the brute force approach would be slower, as lookup algorithms have a direct access to the solution, while rule-based should try several options, and combinations of them, and then choose which result seems to be the best.




= Lemmatisation algorithms

=
A more complex approach to the problem of determining a stem of a word is lemmatisation. This process involves first determining the part of speech of a word, and applying different normalization rules for each part of speech. The part of speech is first detected prior to attempting to find the root since for some languages, the stemming rules change depending on a word's part of speech.
This approach is highly conditional upon obtaining the correct lexical category (part of speech). While there is overlap between the normalization rules for certain categories, identifying the wrong category or being unable to produce the right category limits the added benefit of this approach over suffix stripping algorithms. The basic idea is that, if the stemmer is able to grasp more information about the word being stemmed, then it can apply more accurate normalization rules (which unlike suffix stripping rules can also modify the stem).




= Stochastic algorithms

=
Stochastic algorithms involve using probability to identify the root form of a word. Stochastic algorithms are trained (they "learn") on a table of root form to inflected form relations to develop a probabilistic model. This model is typically expressed in the form of complex linguistic rules, similar in nature to those in suffix stripping or lemmatisation. Stemming is performed by inputting an inflected form to the trained model and having the model produce the root form according to its internal ruleset, which again is similar to suffix stripping and lemmatisation, except that the decisions involved in applying the most appropriate rule, or whether or not to stem the word and just return the same word, or whether to apply two different rules sequentially, are applied on the grounds that the output word will have the highest probability of being correct (which is to say, the smallest probability of being incorrect, which is how it is typically measured).
Some lemmatisation algorithms are stochastic in that, given a word which may belong to multiple parts of speech, a probability is assigned to each possible part. This may take into account the surrounding words, called the context, or not. Context-free grammars do not take into account any additional information. In either case, after assigning the probabilities to each possible part of speech, the most likely part of speech is chosen, and from there the appropriate normalization rules are applied to the input word to produce the normalized (root) form.




= n-gram analysis

=
Some stemming techniques use the n-gram context of a word to choose the correct stem for a word.




= Hybrid approaches

=
Hybrid approaches use two or more of the approaches described above in unison. A simple example is a suffix tree algorithm which first consults a lookup table using brute force. However, instead of trying to store the entire set of relations between words in a given language, the lookup table is kept small and is only used to store a minute amount of "frequent exceptions" like "ran => run". If the word is not in the exception list, apply suffix stripping or lemmatisation and output the result.




= Affix stemmers

=
In linguistics, the term affix refers to either a prefix or a suffix. In addition to dealing with suffixes, several approaches also attempt to remove common prefixes. For example, given the word indefinitely, identify that the leading "in" is a prefix that can be removed. Many of the same approaches mentioned earlier apply, but go by the name affix stripping. A study of affix stemming for several European languages can be found here.




= Matching algorithms

=
Such algorithms use a stem database (for example a set of documents that contain stem words). These stems, as mentioned above, are not necessarily valid words themselves (but rather common sub-strings, as the "brows" in "browse" and in "browsing"). In order to stem a word the algorithm tries to match it with stems from the database, applying various constraints, such as on the relative length of the candidate stem within the word (so that, for example, the short prefix "be", which is the stem of such words as "be", "been" and "being", would not be considered as the stem of the word "beside")..




Language challenges


While much of the early academic work in this area was focused on the English language (with significant use of the Porter Stemmer algorithm), many other languages have been investigated.
Hebrew and Arabic are still considered difficult research languages for stemming. English stemmers are fairly trivial (with only occasional problems, such as "dries" being the third-person singular present form of the verb "dry", "axes" being the plural of "axe" as well as "axis"); but stemmers become harder to design as the morphology, orthography, and character encoding of the target language becomes more complex. For example, an Italian stemmer is more complex than an English one (because of a greater number of verb inflections), a Russian one is more complex (more noun declensions), a Hebrew one is even more complex (due to nonconcatenative morphology, a writing system without vowels, and the requirement of prefix stripping: Hebrew stems can be two, three or four characters, but not more), and so on.




= Multilingual stemming

=
Multilingual stemming applies morphological rules of two or more languages simultaneously instead of rules for only a single language when interpreting a search query. Commercial systems using multilingual stemming exist.




Error metrics


There are two error measurements in stemming algorithms, overstemming and understemming. Overstemming is an error where two separate inflected words are stemmed to the same root, but should not have been—a false positive. Understemming is an error where two separate inflected words should be stemmed to the same root, but are not—a false negative. Stemming algorithms attempt to minimize each type of error, although reducing one type can lead to increasing the other.
For example, the widely used Porter stemmer stems "universal", "university", and "universe" to "univers". This is a case of overstemming: though these three words are etymologically related, their modern meanings are in widely different domains, so treating them as synonyms in a search engine will likely reduce the relevance of the search results.
An example of understemming in the Porter stemmer is "alumnus" → "alumnu", "alumni" → "alumni", "alumna"/"alumnae" → "alumna". This English word keeps Latin morphology, and so these near-synonyms are not conflated.




Applications


Stemming is used as an approximate method for grouping words with a similar basic meaning together. For example, a text mentioning "daffodils" is probably closely related to a text mentioning "daffodil" (without the s). But in some cases, words with the same morphological stem have idiomatic meanings which are not closely related: a user searching for "marketing" will not be satisfied by most documents mentioning "markets" but not "marketing".




= Information retrieval

=
Stemmers can be used as elements in query systems such as Web search engines. The effectiveness of stemming for English query systems were soon found to be rather limited, however, and this has led early information retrieval researchers to deem stemming irrelevant in general. An alternative approach, based on searching for n-grams rather than stems, may be used instead. Also, stemmers may provide greater benefits in other languages than English.




= Domain analysis

=
Stemming is used to determine domain vocabularies in domain analysis.




= Use in commercial products

=
Many commercial companies have been using stemming since at least the 1980s and have produced algorithmic and lexical stemmers in many languages.
The Snowball stemmers have been compared with commercial lexical stemmers with varying results.
Google Search adopted word stemming in 2003. Previously a search for "fish" would not have returned "fishing". Other software search algorithms vary in their use of word stemming. Programs that simply search for substrings will obviously find "fish" in "fishing" but when searching for "fishes" will not find occurrences of the word "fish".




= Text mining

=
Stemming is used as a task in pre-processing texts before performing text mining analyses on it.




See also


Computational linguistics – Use of computational tools for the study of linguistics
Derivation – In linguistics, the process of forming a new word on the basis of an existing onePages displaying short descriptions of redirect targets — stemming is a form of reverse derivation
Inflection – Process of word formation
Lemma (morphology) – Root word of a set of word forms
Lemmatization – Natural language processing canonicalisation
Lexeme – Unit of lexical meaning
Morphology (linguistics) – Study of words and their formation
Natural language processing – Field of linguistics and computer science — stemming is generally regarded as a form of NLP
NLTK – Software suite for natural language processingPages displaying short descriptions of redirect targets — implements several stemming algorithms in Python
Root (linguistics) – Core of a word that is irreducible into more meaningful elements
Snowball (programming language) – String processing programming language — designed for creating stemming algorithms
Stem (linguistics) – Part of a word responsible for its lexical meaningPages displaying short descriptions of redirect targets
Text mining – Process of analysing text to extract information from it




References






Further reading






External links


Apache OpenNLP—includes Porter and Snowball stemmers
SMILE Stemmer—free online service, includes Porter and Paice/Husk' Lancaster stemmers (Java API)
Themis—open source IR framework, includes Porter stemmer implementation (PostgreSQL, Java API)
Snowball—free stemming algorithms for many languages, includes source code, including stemmers for five romance languages
Snowball on C#—port of Snowball stemmers for C# (14 languages)
Python bindings to Snowball API
Ruby-Stemmer—Ruby extension to Snowball API
PECL—PHP extension to the Snowball API
Oleander Porter's algorithm—stemming library in C++ released under BSD
Unofficial home page of the Lovins stemming algorithm—with source code in a couple of languages
Official home page of the Porter stemming algorithm—including source code in several languages
Official home page of the Lancaster stemming algorithm Archived 2011-07-22 at the Wayback Machine—Lancaster University, UK
Official home page of the UEA-Lite Stemmer —University of East Anglia, UK
Overview of stemming algorithms Archived 2011-07-02 at the Wayback Machine
PTStemmer—A Java/Python/.Net stemming toolkit for the Portuguese language
jsSnowball—open source JavaScript implementation of Snowball stemming algorithms for many languages
Snowball Stemmer—implementation for Java
hindi_stemmer—open source stemmer for Hindi
czech_stemmer—open source stemmer for Czech
Comparative Evaluation of Arabic Language Morphological Analysers and Stemmers
Tamil Stemmer

Kata Kunci Pencarian:

• TikTok
• Pavel Nedvěd
• Daftar karakter Game of Thrones
• Klorin
• Operasi Birmingham
• Guncangan Nixon
• Operasi Silver City
• Makita (perusahaan)
• Kesehatan global
• Pembunuhan ganda dan bunuh diri Chris Benoit
• Stemming
• Stem
• Stemmer
• Stem (music)
• The Stems
• Stem tetrapoda
• Heavenly Stems
• Underground stem
• STEM Academy
• Stem succulent