• Source: STV rifle

The STV (abbreviation for Vietnamese: Súng Trường Việt Nam, lit. 'Rifle of Vietnam' or Súng Tiểu liên Việt Nam, lit. 'Submachine Guns of Vietnam' - it should be clarified that Vietnam does not officially adopt and recognize any actual classification and definition for assault rifle, while the majority of internationally-equivalent assault rifles are formally designated as submachine guns in Vietnamese services) is a family of Vietnamese-made service assault rifles and submachine guns.
The STV program was initiated to design the next generation mainline service rifles for the Vietnam People’s Army (VPA) as well as the whole Vietnam People's Armed Forces, using the technologies and experiences acquired from the IWI Galil ACE licensed production. As of 2024, the principle variant STV-380 alongside its carbine derivatives STV-215 and STV-022 have been popularly issued to VPA units alongside other paramilitary and civilian security forces in Vietnam, step-by-step replacing and succeeding the legacy Kalashnikov rifles.
Being products of the Z111 Factory, all STV rifles are chambered in 7.62x39mm.




History


In 2014, the People's Army of Vietnam adopted the IWI Galil ACE 31/32 as the standard-issue rifle. This included a license to manufacture them locally at the Z111 Factory. The factory immediately began modifying the IWI Galil ACE to better suit the local terrain and climate, while also implementing more Kalashnikov parts. This was done to improve familiarity and smoothen the transition from older AK-47 and AKM assault rifles, which were used by Vietnamese soldiers.
The modification process was a fusion of the STL-1A and the Galil ACE, this resulted in prototypes rifle designated as the GK1 and the GK3.
In 2019, the Z111 Factory revealed two new rifles. Designated the STV-215 and the STV-380, the number at the end would indicate the length of the barrels. These two new rifles would be replacing the IWI Galil ACE 31/32 as the standard issued rifle for the People's Army of Vietnam.
In 2020, two new variants of the STV rifles were revealed. These rifles were designated as the STV-410 and the STV-416. Compared to the previous two variants, the new ones would adopt more AK parts into the guns. Currently, the STV-022, STV-215 and STV-380 remain as the standard issued rifles and being the only ones which are in mass production.
The STV-380 was seen in 2021 in parades for the first time alongside the K20 camo uniforms.
In December 2022, a new variant designated as STV-022 was revealed at the 2022 Vietnam Defence Expo. It is a further shortened variant of the standard-issued STV-215, having its stock removed compared to the bigger variants. It was also spotted being used by PAVN personnel in the same event and with the Vietnam Border Guard.
In 2024, the STV-380 was spotted with the Vietnam People's Public Security Mobile Police, referring that the Vietnamese Police is studying the variant for adoption.




Design


All STV variants are generally similar and are mainly built off of the IWI Galil ACE's milled receiver. They are all chambered in 7.62x39mm and can use any standard AK-47/AKM magazines. The numbers on the STV name indicate the barrel length. 380 indicates the standard rifle with a 380mm barrel while the 215 indicates the compact rifle with a 215mm barrel.
The rifles all have the charging handle located on the right side, which is the same for all IWI Galil ACEs manufactured in Vietnam. However, the selective-fire mechanism uses a traditional AK-based mechanism. The handguards and pistol grips are made of polymer and all of the rifles have a folding stock. A bird-cage muzzle brake is included on all rifles.
As the handguards and receiver include a Picatinny rail on top, attachments can be mounted on such as telescopic sights, red dot sights, or holographic sights. The rear sight is located at the rear of the gun. The only exception to this is the STV-416, which does not include any Picatinny rails.
The STV-215 and STV-380 have an additional Picatinny rail located on the bottom of the handguard, commonly used for a foregrip/bipod, laser, or flashlight attachment. When nothing is attached, a plastic cover can be placed over the Picatinny rail for more comfort while holding. The pistol grip for these two are built in to the body of the rifle. These two variants also share the front-sight and gas block similar to the ones found on the IWI Galil ACE.
The STV-410 and STV-416 both lack a Picatinny rail on the bottom of the handguard. Instead, they include a mount for an underbarrel grenade launcher. They also have a slightly different magazine well and trigger rim. The pistol grip for these two variants are also independent of the body and are also based on the AK. These two variants use a folding polymer AK stock instead of the FAL PARA styled stocks used by the STV-215 and STV-380. The front-sight and gas block on these two variants are different from each other.
It was reported in 2021 that the 40mm OPL-40M (entered service as SPL-40) underbarrel grenade launcher would be used in conjunction with the STVs.
The smallest variant STV-022 largely resembles the STV-215 but having its stocks removed, further shortening the overall size of the rifle.




Variants


Note that all variants are designated corresponding to their barrel lengths (except for STV-022).




= Service models

=
These are variants that are chosen to be pressed into service and becoming the next-generation standard-issued rifles of many Vietnamese security forces and currently in large-scale serial production at Z111 Factory.
Since they reportedly participate in active service, they are casually improved and updated corresponding to the experiences and feedback from the operators.
Externally, they look visually comparable to the legacy IMI Galil with rectangular handguard, FN FAL Para-style folding stock and Kalashnikov-style charging handle, however the STV series feature most of mechanical modernization and advantages of the IWI ACE.



STV-380


The STV-380 was selected as the primary infantry weapons and service rifle for the Vietnam People's Army, partially replacing and succeeding the legacy Kalashnikov. It has a foldable stock similar to the FN FAL Para. However, a variant with M18-style buttstock was also developed and revealed. It is the Vietnamese equivalence to the IWI ACE 32.



STV-215


The STV-215 is the carbine version of the STV-380. It is used alongside the STV-380 as one of the standard issued rifles for the People's Army of Vietnam. It is similar to the STV-380 in all aspects, except the barrel length. Being the Vietnamese equivalence to the IWI ACE 31.



STV-022


Unlike other STV variants, the "022" designation likely refers the variant's year of introduction of 2022 instead of its actual barrel length. Classified as a submachine gun, it was initially developed from the request of the General Staff of the Vietnam People's Army Guard Brigade 144 for a compact, close-ranged but powerful firearm for bodyguard and close protection purposes.
No further specifications were formally revealed about this rifle but according to the publicized picture, it is the smallest variant of the STV family with the whole rifle largely resembles the STV-215, except with the stock eventually removed to further downsizing the rifle and its handguard revised.
Despite its compact size, it is still chambered in 7.62×39mm.
It is the next STV variant to be issued to the People's Army of Vietnam, already spotted with the Vietnam Border Guard and Army guarding units.




= Other models

=
These variants are proposed and introduced as technology demonstrators and for commercial purposes. However, they are never chosen as the service rifle by any Vietnamese security forces, due to the proven superiority and suitability of the STV-380 and its derivatives.



STV-410

The build of the STV-410 overall resembles an AK-12, however with a AK-100-style solid folding stock. The handguard's Picatinny rail is slightly extended to cover the entirety of the handguard.



STV-416

The STV-416 is an assault rifle, which resembles an AK-103. The rifle is the only variant that does not include any Picatinny rails. Instead, it includes a side-mount for sights and a mount on the handguard for a grenade launcher.
The rear-sight is moved up to the rear of the handguard. The front-sight and gas block are similar to the ones found AK-103.




See also


IWI ACE - basis for the STV family




References

Kata Kunci Pencarian:

• Galil ACE
• Komando Pasukan Gerak Cepat
• Daftar senapan serbu
• STV rifle
• AK-47
• STL-1A
• List of 7.62×39mm firearms
• Vietnam People's Public Security
• List of equipment of the Vietnam People's Ground Forces
• RK 62
• Z111 Factory
• Kalashnikov rifle
• IWI Galil ACE