• Source: Subaru FB engine

The Subaru FB engine is the third and current generation of gasoline boxer-4 engine used in Subaru automobiles, and was announced on 23 September 2010. It follows the previous generation EJ-series engine which was introduced in 1989 and the first generation EA-series which was introduced in 1966. By increasing piston stroke and decreasing piston bore, Subaru aimed to reduce emissions and improve fuel economy, while increasing and broadening torque output compared to the EJ-series.
The Subaru FA engine series was derived later from the FB, but the two engine families share only a few common parts. In 2020, Subaru introduced the CB18 engine with improved efficiency to succeed the FB in several applications.




Overview


Unofficially, Subaru stated that "FB" stands for "FHI/Future and Brand New/Boxer". It was announced in September 2010 as the third generation (following the EA 1st and EJ 2nd generations) boxer engine family with 2.0 litre and 2.5 litre naturally aspirated variants. The FB has an all new block and head featuring dual overhead cams with intake and exhaust variable valve timing (which Subaru designates as AVCS, standing for Active Valve Control System), and a timing chain that replaced the timing belt. Moving to chain-driven cams is said to allow the valves to be placed at a more narrow angle to each other and shrink the bore of cylinder from 99.5 to 94 mm (3.92 to 3.70 in). It results in less unburned fuel during cold start, thereby reducing emissions. Subaru is able to maintain the exterior dimension substantially unchanged by using asymmetrical connecting rods like those in the EZ36 engine. The FB is only marginally heavier than an equivalent-displacement EJ. In Jan 2011, Car and Driver was told direct injection would be added soon.
Subaru claims a 28-percent reduction in friction losses, mainly due to lighter pistons and connecting rods. A compact oil pump is also credited with contributing to the reduction in friction losses. The FB has a 10% improvement in fuel economy with the power coming on sooner and the torque band being broader.
The compression ratio is slightly higher, and the stroke has increased compared to the EJ engine; previously, the chassis precluded a longer stroke. These changes improve combustion efficiency and allow higher torque at lower speeds. The FB is built at Gunma Oizumi Plant and was initially available as a 2.5 litre displacement engine, starting in Forester models, with a 2.0 litre model to follow in Imprezas. 0W–20 oil is used to help fuel economy, and approximately 1 litre more oil is used as the newly adopted timing chain requires an oil supply.




FB16


All FB16 variants:

Displacement: 1,600 cc (1.6 L) DOHC
Bore x stroke: 78.8 mm × 82 mm (3.10 in × 3.23 in)




= FB16

=

Compression: 11.0:1
2012+ EUDM Subaru Impreza XV 1.6i
Power: 84 kW (114 PS; 113 hp) at 5,600 rpm
Torque: 15.3 kg⋅m (150 N⋅m; 111 lb⋅ft) at 4,000 rpm
2017+ EUDM Subaru Impreza and 2018+ Subaru XV
Power: 84 kW (114 PS; 113 hp) at 6,200 rpm
Torque: 15.3 kg⋅m (150 N⋅m; 111 lb⋅ft) at 3,600 rpm
2017+ JDM Subaru Impreza and 2018+ Subaru XV
Power: 115 PS (85 kW; 113 hp) at 6,200 rpm
Torque: 15.1 kg⋅m (148 N⋅m; 109 lb⋅ft) at 3,600 rpm




= FB16 DIT

=

The FB16 direct injection turbocharged (DIT) engine is the first FB-series engine with a turbocharger, and includes direct injection with an auto stop/start system. It is the base engine in the first-generation (2014–20 model years) Subaru Levorg. The Levorg also has an option for a 2.0 litre direct injection turbo engine, the FA20F. The design target for the FB16 DIT engine was to equal or exceed the performance of the FB25 naturally-aspirated engine fitted to the Legacy, using regular gasoline, according to the designer, Rei Sasaki. Although it shares its displacement with the naturally aspirated FB16, the only part the two engines share is the crankshaft. As fitted to the Levorg, the FB16 DIT was able to achieve fuel economy of 16.0 km/L (38 mpg‑US) on the JC08 cycle.

Compression: 11.0:1
Application: 2014–20 Subaru Levorg
Power: 125 kW (170 PS; 168 hp) at 4,800-5,600 RPM
Torque: 25.5 kg⋅m (250 N⋅m; 184 lbf⋅ft) at 1,800-4,800 RPM




FB20


The prior EJ20 used an oversquare 92 mm × 75 mm (3.62 in × 2.95 in) bore and stroke for a 1,994 cc (2.0 L) swept displacement; in comparison, the FB20 features an undersquare bore and stroke for a slightly larger displacement.
All FB20 variants:

Displacement: 1,995 cc (2.0 L) DOHC
Bore x stroke: 84 mm × 90 mm (3.31 in × 3.54 in)




= FB20B

=

Compression: 10.5:1
2011+ JDM Subaru Forester:
Power: 109 kW (148 PS; 146 hp) at 6,000 rpm
Torque: 20 kg⋅m (196 N⋅m; 145 lbf⋅ft) at 4,200 rpm
2012-2016 USDM Subaru Impreza and 2012-2017 Subaru XV:
Power: 110 kW (150 PS; 148 hp) at 6,200 rpm
Torque: 20 kg⋅m (196 N⋅m; 145 lbf⋅ft) at 4,200 rpm




= FB20X

=

The existing FB20B was modified by reducing internal friction for the hybrid drivetrain, which incorporates an electric motor in the Lineartronic CVT. The high-voltage traction battery is installed below the cargo area for better weight balance. Combined system power is stated to be 160 hp (119 kW). Output of the gasoline engine is comparable to that of the non-hybrid FB20B.

Compression: 10.8:1
Application: 2014–16 Subaru XV Hybrid
Combined system output:
Power: 160 hp (162 PS; 119 kW) at 6,000 rpm
Torque: 163 lb⋅ft (221 N⋅m; 23 kg⋅m) at 2,000 rpm
Gasoline engine output:
Power: 148 hp (150 PS; 110 kW)
Torque: 145 lb⋅ft (197 N⋅m; 20 kg⋅m)
Electric motor output:
Power: 13.4 hp (14 PS; 10 kW)
Torque: 48.0 lb⋅ft (65 N⋅m; 7 kg⋅m)




= FB20D

=
Used in the fifth generation Impreza sedan and hatchback; compared to the FB20B, the FB20D adds direct injection, providing a slight increase in power and efficiency.

Compression: 12.5:1
2017+ Subaru Impreza (All trims) and 2018+ Subaru XV/Crosstrek (Base & Premium trims only)
Power (JDM, USDM) : 113 kW (154 PS; 152 hp) at 6,000 RPM
Power (EUDM, AUDM, THDM): 115 kW (156 PS; 154 hp) at 6,000 RPM
Torque: 20 kg⋅m (196 N⋅m; 145 lbf⋅ft) at 4,000 RPM




= FB20V

=
The 2019 Crosstrek is available with a plug-in hybrid system sourced from Toyota. The new hybrid drivetrain uses two motor-generator units; the traction motor (MG2) and battery are significantly larger compared to the previous XV Crosstrek Hybrid, and the vehicle is capable of moving under electric power alone for a limited distance. MG2 is used under parallel hybrid operation as well. MG1 is used as the starter motor and charges the battery for series hybrid operation. The direct-injection FB20V in the revised hybrid is detuned compared to the conventional FB20D.

Application: 2019+ Subaru Crosstrek Hybrid (PHEV)
Combined system output:
Power: 148 hp (150 PS; 110 kW)
Gasoline engine output:
Power: 137 hp (139 PS; 102 kW) at 5,600 RPM
Torque: 134 lb⋅ft (182 N⋅m; 19 kg⋅m) at 4,400 RPM
Electric traction motor (MG2) output:
Power: 118 hp (120 PS; 88 kW)
Torque: 149 lb⋅ft (202 N⋅m; 21 kg⋅m)




= FB20D e-Boxer

=
The direct-injection FB20D was also used in a mild parallel hybrid configuration similar to the FB20X. The mild hybrid drivetrain was fitted to selected trims for models sold in Japan (Forester, July 2018 and XV, October 2018), Europe (same models, starting in 2019), and Australia (same models, starting in 2020).

Application: 2019+ JDM and EUDM Subaru XV and Forester, selected models
Combined system output:
Power: 107 kW (145 PS; 143 hp) at 6,000 rpm
Torque: 188 N⋅m (19 kg⋅m; 139 lb⋅ft) at 4,000 rpm
Gasoline engine output:
Power: 145 PS (107 kW; 143 hp)
Torque: 188 N⋅m (19 kg⋅m; 139 lb⋅ft)
Electric motor output:
Power: 10 kW (14 PS; 13 hp)
Torque: 65 N⋅m (7 kg⋅m; 48 lb⋅ft)




FB25


Compared to the previous EJ25, which had a displacement of 2,457 cc (2.5 L) from an oversquare 99.5 mm × 79 mm (3.92 in × 3.11 in) bore and stroke, the FB25 has slightly larger displacement on a less oversquare bore and stroke.
All FB25 variants:

Displacement: 2,498 cc (2.5 L) DOHC
Bore x stroke: 94 mm × 90 mm (3.70 in × 3.54 in)




= FB25B

=

Compression: 10.0:1
Power: 170 hp (172 PS; 127 kW) at 5,800 rpm
Torque: 174 lb⋅ft (236 N⋅m; 24 kg⋅m) at 4,100 rpm
Application:
2011–18 North American Subaru Forester
2012–19 North American Subaru Legacy
2013–19 North American Subaru Outback




= FB25D

=

The 2019 model year Subaru Forester was introduced at the 2018 New York International Auto Show with a revised version of the FB25 engine featuring direct injection, resulting in a slight boost in power and fuel economy. The seventh-generation 2020 model year Legacy and Outback also adopted the revised direct-injection FB25D as its base engine.

Compression: 12.0:1
2019–2024 Subaru Forester, 2020–2025 Subaru Legacy (non-XT trims), 2020+ Subaru Outback (non-XT trims), 2021+ Subaru Crosstrek (USDM Premium (2025+), Sport, Limited, and Wilderness trims; Canadian Outdoor, Onyx, and Wilderness trims), 2024+ Subaru Impreza (RS trim)
Power: 182 hp (185 PS; 136 kW) at 5,800 rpm
Torque: 176 lb⋅ft (239 N⋅m; 24 kg⋅m) at 4,400 rpm
2025+ Subaru Forester
Power: 180 hp (180 PS; 130 kW) at 5,800 rpm
Torque: 178 lb⋅ft (241 N⋅m; 24.6 kg⋅m) at 3,700 rpm




References






External links



(Japanese: Subaru FB engine)

Tanigawa, Kiyoshi (29 September 2010). "スバル、新世代水平対向エンジン「FB型」説明会" [Subaru new-generation boxer "FB series" press conference]. Car Watch. Retrieved 28 February 2018.
"Technology: Performance — The Subaru Boxer Engine". Subaru Global. Retrieved 28 February 2018.
"What's The Difference Between Subaru Engines?". Subaru of Australia. Retrieved 28 February 2018.

Kata Kunci Pencarian:

• Subaru FB engine
• Subaru FA engine
• List of Subaru engines
• Subaru CB engine
• Subaru EJ engine
• Subaru
• Subaru WRX STI
• Subaru Forester
• List of Subaru transmissions
• Suzuki FB series engine