• Source: Wright R-975 Whirlwind

The Wright R-975 Whirlwind was a series of nine-cylinder air-cooled radial aircraft engines built by the Wright Aeronautical division of Curtiss-Wright. These engines had a displacement of about 975 cu in (15.98 L) and power ratings of 300–450 hp (220–340 kW). They were the largest members of the Wright Whirlwind engine family to be produced commercially, and they were also the most numerous.
During World War II, Continental Motors built the R-975 under license as a powerplant for Allied tanks and other armored vehicles. Tens of thousands of engines were built for this purpose, dwarfing the R-975's usage in aircraft, where it was overshadowed by the similar Pratt & Whitney R-985. After the war, Continental continued to produce its own versions of the R-975 into the 1950s. Some of these produced as much as 550 hp (410 kW).
The R-975 powered the American World War II M18 Hellcat tank destroyer which was claimed to have been the fastest tracked armored vehicle until the introduction of the turbine powered M1 Abrams in the 1980s.




Design and development


Wright introduced the J-6 Whirlwind family in 1928 to replace the nine-cylinder R-790 series. The J-6 family included varieties with five, seven, and nine cylinders. The nine-cylinder version was originally known as the J-6 Whirlwind Nine, or J-6-9 for short. The U.S. government designated it as the R-975; Wright later adopted this and dropped the J-6 nomenclature.
Like all the members of the J-6 Whirlwind family, the R-975 had larger cylinders than the R-790. The piston stroke of 5.5 in (14.0 cm) was unchanged, but the cylinder bore was expanded to 5.0 in (12.7 cm) from the R-790's bore of 4.5 in (11.4 cm). While the R-790 was naturally aspirated, the R-975, like the other J-6 engines, had a gear-driven supercharger to boost its power output.
Wright gradually developed the R-975, at first using suffix letters to indicate successive versions. The original R-975 (or J-6-9) was rated for 300 hp (224 kW), while the R-975E of 1931 could do 330 hp (246 kW) thanks to an improved cylinder head design. Wright later added numeric suffixes to show different power levels. The R-975E-1, introduced the same year as the R-975E, was rated at 365 hp (272 kW) thanks to higher-compression pistons and a slightly greater RPM limit. An even more powerful version, the R-975E-3, was also introduced that year, with greater supercharging and a still higher RPM limit, and was progressively refined until the final model of 1935 could reach 450 hp (336 kW) for takeoff.




Operational history


As the most powerful Whirlwind to be produced, commercially it was also the most successful. It powered a wide variety of civil utility aircraft, such as the Beechcraft Staggerwing, and various airliners, such as the Ford 4-AT-E Trimotor and the Lockheed 10B Electra. In addition, it powered U.S. military training aircraft including the North American BT-9 and Vultee BT-15 Valiant for the Army and the Curtiss-Wright SNC Falcon for the Navy. The Curtiss F9C Sparrowhawk parasite fighter operated from U.S. Navy airships was also powered by the R-975.
One notable record set by a Wright J-6 Whirlwind-powered aircraft occurred during July 28–30, 1931, when Russell Norton Boardman and John Louis Polando flew non-stop from Floyd Bennett Field, on Long Island to Istanbul, Turkey in the Cape Cod, a Bellanca Special J-300 high-wing monoplane in 49:20 hours, establishing a distance record of 5,011.8 miles (8,065.7 km), the first nonstop record flight to surpasse 5,000 mi (8,000 km).
However, the R-975 faced heavy competition from Pratt & Whitney's R-985 Wasp Junior and from their larger R-1340 Wasp. Pratt & Whitney R-985 outsold the Wright R-975 by a wide margin.
Wright's production of the R-975 ceased in 1945, with over 7,000 engines being produced by the company.




= Production by Continental Motors

=

In 1939 the U.S. Army, which had been using Continental R-670 radial engines in its light tanks, chose Continental Motors to build the R-975 under license as the engine for its M2 medium tanks. Subsequently, the same engine was selected for the M3 Lee medium tank, the M4 Sherman medium tank, the Canadian Ram tank (which used the M3 chassis), the M7 Priest self-propelled gun, the M18 Hellcat tank destroyer, and other Allied armored vehicles based on these. Continental versions of the R-975 for armored vehicles included the R-975E-C2, the R-975-C1, and the R-975-C4.
In contrast to the 7,000 built by Wright, Continental built over 53,000 R-975 engines.
When installed in a tank, the R-975 did not have the benefit of being cooled by air slipstream or propeller blast, so a cooling fan was attached to the power shaft and surrounded by a shroud to provide the same effect.
After the war, Continental introduced its own R-975 version for aircraft, the R9-A. Though it was basically similar to other R-975 engines, and its compression ratio and supercharger gear ratio were unchanged from the R-975E-3, other improvements in the R9-A allowed it to achieve 525 hp (391 kW) for takeoff, surpassing any Wright version. A military version, the R-975-46, could reach 550 hp (410 kW), and was used in Piasecki's HUP Retriever and H-25 Army Mule helicopters. Continental's production of R-975 engines continued into the 1950s.




= Other license-built R-975s

=
The engine was built in Spain as the Hispano-Suiza 9Q or Hispano-Wright 9Q without modification apart from the use of Hispano's patented nitriding finishing process and, on one version only, the 9Qdr, an epicyclic output speed reducer. The R-975 was also produced under licence by Fábrica Nacional de Motores in Brazil.




Variants


J-6-9 (R-975)
300 hp (220 kW) at 2,000 RPM.
R-975-20
300 hp (220 kW) for airship use
R-975E
330 hp (250 kW) at 2,000 RPM. Higher power from improved cylinder head.
R-975E-1
365 hp (272 kW) at 2,100 RPM. Higher compression ratio.
R-975E-3
420 hp (310 kW) at 2,200 RPM up to 1,400 ft (430 m), 450 hp (340 kW) at 2,250 RPM for takeoff. Increased supercharging, slightly higher compression ratio.
R-975E-C2
400 hp (300 kW) at 2,400 RPM. Built by Continental Motors under license for use in armored vehicles.
Continental R9-A
500 hp (370 kW) at 2,300 RPM at 4,000 ft (1,200 m), 525 hp (391 kW) at 2,300 RPM for takeoff. Continental's improved post-war version.
Hispano-Suiza 9Q
Licence-built R-975 J-6 Whirlwind
Hispano-Suiza 9Qa
variant of the licence-built R-975 J-6 Whirlwind
Hispano-Suiza 9Qb
variant of the licence-built R-975 J-6 Whirlwind
Hispano-Suiza 9Qc
variant of the licence-built R-975 J-6 Whirlwind
Hispano-Suiza 9Qd
variant of the licence-built R-975 J-6 Whirlwind
Hispano-Suiza 9Qdr
variant of the licence-built R-975 J-6 Whirlwind




Applications






= Wright J-6-9 and R-975

=




= Continental R-975

=

Beech D-18C
Grizzly I cruiser – Canadian production of M4A1 Sherman tank
Kangaroo armoured personnel carrier modification of M7 Priest and other vehicles
Kellett XR-10
M3 Lee
M4 Sherman
M7 Priest
M18 Hellcat
M12 gun motor carriage
M40 gun motor carriage
McDonnell XV-1
Piasecki HUP Retriever
Ram tank
Sexton self-propelled gun
Sikorsky XHJS-1 (S-53) – prototype helicopter
Skink anti-aircraft tank – anti-aircraft vehicle based on Grizzly I




Engines on display


Some museums which have R-975 engines on display:

Pima Air & Space Museum in Tucson, Arizona has a Wright R-975.
Hiller Aviation Museum in San Carlos, California has a Wright R-975.
National Museum of Naval Aviation near Pensacola, Florida has a Continental R-975.
Southern Museum of Flight in Birmingham, Alabama has a Continental R-975.
Queensland Air Museum in Caloundra, Queensland, Australia has a Continental R-975.
Lake Boga Catalina Museum (Lake Boga, Victoria, Australia) has a Continental Wright R-975.




Specifications (Whirlwind R-975E-3)


Data from FAA type certificate data sheet for the R-975E-3; dimensions from Curtiss-Wright (1983).




= General characteristics

=
Type: 9-cylinder supercharged air-cooled radial piston engine
Bore: 5.0 in (127 mm)
Stroke: 5.5 in (140 mm)
Displacement: 972 cu in (15.93 L)
Length: 43.0 in (109.2 cm)
Diameter: 45.0 in (114.3 cm)
Dry weight: 675 lb (306 kg)




= Components

=
Valvetrain: 2 valves per cylinder, pushrod-actuated
Supercharger: gear-driven, 10.15:1 impeller gear ratio
Fuel type: 80 octane
Reduction gear: Direct drive




= Performance

=
Power output: 420 hp (313 kW) at 2,200 RPM up to 1,400 ft (427 m); 450 hp (336 kW) at 2,250 RPM for takeoff
Specific power: 0.43 hp/cu-in (19.7 kW/L)
Compression ratio: 6.3:1
Power-to-weight ratio: 0.62 hp/lb (1.02 kW/kg)




See also


Wright Whirlwind series
Related development

Wright J-5/R-790
Wright J-6-5/R-540
Wright J-6-7/R-760

Comparable engines

Alvis Leonides
Pratt & Whitney R-985 Wasp Junior
Bristol Mercury
Related lists

List of aircraft engines




References






= Notes

=




= Bibliography

=




External links



Engine Data Sheets: US Aero Engines — R-975 page Archived 2009-06-28 at the Wayback Machine

Kata Kunci Pencarian:

• Wright R-975 Whirlwind
• Wright R-790 Whirlwind
• North American NA-16
• Wright Whirlwind series
• Wright R-540 Whirlwind
• North American T-6 Texan variants
• Wright R-760 Whirlwind
• Pratt & Whitney R-985 Wasp Junior
• Wright R-3350 Duplex-Cyclone
• Hispano-Suiza