• Source: Aeronca Aircraft

Aeronca, contracted from Aeronautical Corporation of America, located in Middletown, Ohio, is a US manufacturer of engine components and airframe structures for commercial aviation and the defense industry, and a former aircraft manufacturer. From 1928 to 1951, the company was a major producer of general aviation aircraft, and also produced the engines for some of their early designs.
Aeronca is now (2011) a division of Magellan Aerospace, producing aircraft, missile, and space vehicle components at the same location adjacent to Middletown's Hook Field Municipal Airport.




History






= Origins

=
Originally formed as the Cincinnati Aeronautical Corporation, the Aeronautical Corporation of America was founded November 11, 1928, in Cincinnati, Ohio. The name was generally abbreviated to Aeronca. Backed by the financial and political support of the prominent Taft family and future Ohio senator Robert A. Taft who was one of the firm's directors, Aeronca became the first American company to build a commercially successful general aviation aircraft. The corporation changed its name to Aeronca Aircraft Corporation in 1941. When production ended in 1951, Aeronca had sold 17,408 aircraft in 55 models.

Production began with the Jean A. Roche-designed Aeronca C-2 monoplane, often called the "Flying Bathtub", in 1929, the C designation standing for Cincinnati. The next major model was the Scout of 1937, a two-seater, which was developed into the Chief and Super Chief the next year.
The Ohio River flood of 1937 at the Lunken Airport resulted in the entire airport area being washed away. Aeronca's factory was destroyed, along with the tooling and almost all of the very early blueprints and drawings. As a result, two years later the decision was made to move out of the floodplain to Hook Field Municipal Airport in Middletown, Ohio. By October of 1940 the plant had to expand by 25,000 sq ft (2,300 m2) to keep up with production demands.




= World War II

=
The Defender, a tandem trainer version of the Chief with a higher rear seat, was used in training many of the pilots who flew in World War II.
Several observation and liaison aircraft designs were also produced during and after the war, seeing extensive front line use, including the L-3/O-58.
A glider-trainer version of the Defender, the Aeronca TG-5, replaced the engine with a third seat, facilitating the training of combat glider pilots destined to fly larger craft, such as the Waco CG-4A.
Aeronca's World War II designs—the Defender, TG-5 and L-3 variants—differed significantly from nearly all previous and subsequent Aeroncas by replacing Aeronca's traditional three-longeron, triangular-cross-section fuselage with a four-longeron, rectangular-cross-section fuselage for additional strength.




= Postwar

=

In 1945, following the end of World War II, Aeronca returned to civilian production with two new models, the 7AC Champion and the 11AC Chief. While the Champ shared its tandem seating arrangement with the prewar tandem trainer—and the Chief shared its name and seating arrangement with the prewar Chief designs—both were new fresh paper designs and designed for production economy, sharing over 80% of the components. One of the very few aircraft manufacturers that used an assembly line production layout.
A benefit of the concurrent development was that the new designs had about 80% of their parts in common. Nevertheless, the tandem-seat Champ—resembling the extremely popular Piper J-3 Cub—was favored by the market, evidenced by its outselling its sibling, the Chief, at a rate of 4 to 1. Between 1945 and 1951, nearly 8,000 Champions were manufactured; while over the same period, approximately 2,000 Chiefs were produced.




= New ownership

=
Aeronca ceased light aircraft production in 1951, and in 1954 sold the Champion design to the new Champion Aircraft Corporation of Osceola, Wisconsin, which continued building variants of the Champion as well as the derivative design, the Citabria. The venerable aircraft design was acquired again by the Bellanca Aircraft Company in 1970 and again to American Champion in 1988, where it remains in production.
Aeronca purchased the Longren Aircraft Corporation in 1959. However, by 1965 it was nearly bankrupt and a new president, Alfred A. Handschumacher, was hired to return the company to profitability.
In the early 1970s, Aeronca was contracted by Bede Aircraft to assemble its first Bede BD-5J Microjet—the world's smallest jet airplane—but, after its experiences with the prototype, Aeronca declined to be further involved with the program.
In 1978 Aeronca planned to start aircraft production again with production of a prototype very light business jet, the Foxjet ST600. The project was eventually cancelled due to lack of WR-44 engine availability.
Fleet Aerospace launched a successful hostile takeover of the company in 1986.
Aeronca now builds components for aerospace companies including Boeing, Northrop Grumman, Lockheed and Airbus. In its 23-year history as a general aviation and military aviation manufacturer, Aeronca produced 17,408 aircraft spanning 55 different models.




Products






= Aircraft

=




= Missiles

=
GT-1 (missile)




= Engines

=
Aeronca E-107
Aeronca E-113




See also


Aeronca Museum
International Aircraft
Metal Aircraft Corporation
Taylorcraft Aircraft




References






= Notes

=




= Bibliography

=




External links



Aeronca Aviators Club, started by Joe Dickey. Has Quarterly Newsletter
National Aeronca Association, associated with the original Aeronca factory.
Aeronca Aircraft History Museum, Director Todd Trainor, supporting various models of the aircraft.
Aeronca Club of Germany
Aeronca Club of Great Britain
Fearless Aeronca Aviators, a very popular Aeronca email list.

Kata Kunci Pencarian:

• Cessna EC-2
• HAL Pushpak
• Aeronca Aircraft
• Aeronca Champion
• Aeronca L-3
• Aeronca Chief family
• Aeronca C-2
• Aeronca Sedan
• Aeronca L-16
• Aeronca C-3
• Aeronca 11 Chief
• Aeronca L