• Source: AVR32

AVR32 is a 32-bit RISC microcontroller architecture produced by Atmel. The microcontroller architecture was designed by a handful of people educated at the Norwegian University of Science and Technology, including lead designer Øyvind Strøm and CPU architect Erik Renno in Atmel's Norwegian design center.
Most instructions are executed in a single-cycle. The multiply–accumulate unit can perform a 32-bit × 16-bit + 48-bit arithmetic operation in two cycles (result latency), issued once per cycle.
It does not resemble the 8-bit AVR microcontroller family, even though they were both designed at Atmel Norway, in Trondheim. Some of the debug-tools are similar.
Support for AVR32 has been dropped from Linux as of kernel 4.12; Atmel has switched mostly to M variants of the ARM architecture.




Architecture


The AVR32 has at least two micro-architectures, the AVR32A and AVR32B. These differ in the instruction set architecture, register configurations and the use of caches for instructions and data.
The AVR32A CPU cores are for inexpensive applications. They do not provide dedicated hardware registers for shadowing the register file, status and return address in interrupts. This saves chip area at the expense of slower interrupt-handling.
The AVR32B CPU cores are designed for fast interrupts. They have dedicated registers to hold these values for interrupts, exceptions and supervisor calls. The AVR32B cores also support a Java virtual machine in hardware.
The AVR32 instruction set has 16-bit (compact) and 32-bit (extended) instructions, similar to e.g. some ARM, with several specialized instructions not found in older ARMv5 or ARMv6 or MIPS32. Several U.S. patents are filed for the AVR32 ISA and design platform.
Just like the AVR 8-bit microcontroller architecture, the AVR32 was designed for high code density (packing much function in few instructions) and fast instructions with few clock cycles. Atmel used the independent benchmark consortium EEMBC to benchmark the architecture with various compilers and consistently outperformed both ARMv5 16-bit (Thumb) code and ARMv5 32-bit (ARM) code by as much as 50% on code-size and 3× on performance.
Atmel says the "picoPower" AVR32 AT32UC3L consumes less than 0.48 mW/MHz in active mode, which it claimed, at the time, used less power than any other 32-bit CPU. Then in March 2015, they claim their new Cortex-M0+-based microcontrollers, using ARM Holdings' ARM architecture, not their own instruction set, "has broken all ultra-low power performance barriers to date."




Implementations


The AVR32 architecture was used only in Atmel's own products. In 2006, Atmel launched the AVR32A: The AVR32 AP7 core, a 7-stage pipelined, cache-based design platform. This "AP7000" implements the AVR32B architecture, and supports a hardware FPU, SIMD (single instruction multiple data) DSP (digital signal processing) instructions to the RISC instruction-set, in addition to Java hardware acceleration. It includes a Memory Management Unit (MMU) and supports operating systems like Linux. In early 2009, the rumored AP7200 follow-on processor was held back, with resources going into other chips.
In 2007, Atmel launched the second AVR32: The AVR32 UC3 core. This is designed for microcontrollers, using on-chip flash memory for program storage and running without an MMU (memory management unit). The AVR32 UC3 core uses a three-stage pipelined Harvard architecture specially designed to optimize instruction fetches from on-chip flash memory. The AVR32 UC3 core implements the AVR32A architecture. It shares the same instruction set architecture (ISA) as its AP7 sibling, but differs by not including the optional SIMD instructions or Java support. The FPU instruction set is optional, and was not implemented in the initial families of UC3 microcontrollers. It shares more than 220 instructions with the AVR32B. The ISA features atomic bit manipulation to control on-chip peripherals and general purpose I/Os and fixed point DSP arithmetic.
Both implementations can be combined with a compatible set of peripheral controllers and buses first seen in the AT91SAM ARM-based platforms. Some peripherals first seen in the AP7000, such as the high speed USB peripheral controller, and standalone DMA controller, appeared later in updated ARM9 platforms and then in the ARM Cortex-M3 based products.
Both AVR32 cores include a Nexus class 2+ based On-Chip Debug framework build with JTAG.
The UC3 C core, announced at the Electronica 2010 in Munich Germany on November 10, 2010, was the first member of the UC3 family to implement FPU support.




Devices






= AP7 core

=
On April 10, 2012 Atmel announced the End of Life of AP7 Core devices from April 4, 2013.

AT32AP7000
AT32AP7001
AT32AP7002




= UC3 core

=
If the devicename ends in *AU this is an Audio version, these allow the execution of Atmel licensed Audio firmware IPs.
If the devicename ends in *S it includes an AES Crypto Module.

A0/A1 Series – devices deliver 91 Dhrystone MIPS (DMIPS) at 66 MHz (1 flash wait-state) and consume 40 mA @66 MHz at 3.3 V.
AT32UC3A0128
AT32UC3A0128AU
AT32UC3A0256
AT32UC3A0256AU
AT32UC3A0512
AT32UC3A0512AU
AT32UC3A1128
AT32UC3A1256AU
AT32UC3A1512
AT32UC3A1512AU
A3/A4 Series – devices deliver 91 Dhrystone MIPS (DMIPS) at 66 MHz and consume 40 mA @66 MHz at 3.3 V.
AT32UC3A364
AT32UC3A364S
AT32UC3A3128
AT32UC3A3128S
AT32UC3A3256
AT32UC3A3256AU
AT32UC3A3256S
AT32UC3A464
AT32UC3A464S
AT32UC3A4128
AT32UC3A4128S
AT32UCA4256
AT32UC3A4256S
B Series – deliver 72 Dhrystone MIPS (DMIPS) at 60 MHz and consume 23 mA @66 MHz at 3.3V.
AT32UC3B064
AT32UC3B0128
AT32UC3B0128AU
AT32UC3B0256
AT32UC3B0512
AT32UC3B0512AU
AT32UC3B164
AT32UC3B1128
AT32UC3B1256
AT32UC3B1512
C Series – devices deliver 91 Dhrystone MIPS (DMIPS) at 66 MHz and consume 40 mA @66 MHz at 3.3 V.
AT32UC3C064C
AT32UC3C0128C
AT32UC3C0256C
AT32UC3C0512C
AT32UC3C0512CAU
AT32UC3C164C
AT32UC3C1128C
AT32UC3C1256C
AT32UC3C1512C
AT32UC3C264C
AT32UC3C2128C
AT32UC3C2256C
AT32UC3C2512C
D Series – The low-power UC3D embeds SleepWalking technology that allows a peripheral to wake the device from sleep mode.

ATUC64D3
ATUC128D3
ATUC64D4
ATUC128D4
L Series – deliver 64 Dhrystone MIPS (DMIPS) at 50 MHz and consume 15 mA @50 MHz at 1.8 V.
AT32UC3L016
AT32UC3L032
AT32UC3L064
AT32UC3L0128
AT32UC3L0256
ATUC64L3U
ATUC128L3U
ATUC256L3U
ATUC64L4U
ATUC128L4U
ATUC256L4U




Boards



AT32AP7000 development environment (STK1000)
AT32AP7000 Network Gateway Kit (NGW100)
AT32AP7000 board with FPGA, video decoder and Power over Ethernet (Hammerhead)
AT32AP7000 Indefia Embedded Linux Board with ZigBee support
All AT32UC3 Series Generic Evaluation platform (STK600)
AT32UC3A0/1 Series Evaluation Kit (EVK1100)
AT32UC3A0/1 Series Audio Evaluation Kit (EVK1105)
AT32UC3A3 Series Evaluation Kit (EVK1104)
AT32UC3B Series Evaluation Kit (EVK1101)
AT32UC3B Breadboard module (Copper)
AT32UC3A1 Breakout/Small Development board (Aery32)




See also


Atmel
Atmel AVR
Arduino




References






External links



Atmel AVR32* "AVR32 Linux Project". Archived from the original on September 2, 2011. Retrieved May 9, 2013. (now dead) contained recent Linux kernel patches and GCC / binutils and so on.

Kata Kunci Pencarian:

• Ghidra
• Atmel
• Pengendali mikro
• FFmpeg
• AVR32
• Ghidra
• FreeRTOS
• Executable and Linkable Format
• AVR microcontrollers
• Reduced instruction set computer
• UClibc
• Linux on embedded systems
• GNU Compiler Collection
• Microcontroller