- Source: Banjo fitting
A banjo fitting is actually called a hose connecting bolt, or internally relieved bolt, and a spherical union for fluid transfer. See DIN 7643. It is typically used to connect a fluid line to a rigid, internally threaded hydraulic component. The bolt is assembled through the center of the union, usually with face seals on either side of the union, to create a fluid path between the external ports on the union and bolt. A flexible hose or a rigid pipe may be connected to the union port.
The main advantage of the fitting is in high pressure applications (i.e. more than 50 bar). The name stems from the shape of the fitting, having a large circular section connected to a thinner pipe, generally similar to the shape of a banjo.
Compared to pipe fittings that are themselves threaded, banjo fittings have the advantage that they do not have to be rotated relative to the host fitting. This avoids damage that can be caused by twisting the hose during installation. It also allows the pipe exit direction to be adjusted relative to the fitting, then the bolt tightened independently.
Common applications
Banjo fittings are commonly found in automotive fuel, motor oil and hydraulic systems (e.g.: brakes and clutch). General applications include:
Hydraulic power systems
Power steering fluid
Variable valve timing systems
Brake caliper connectors
Turbo charger oil feeds
Fuel filter connectors
Carburetor connector
Hydraulic clutch systems
Fuel dosing for SCR systems
References
Kata Kunci Pencarian:
- Banjo fitting
- Banjo-Kazooie: Nuts & Bolts
- SU carburettor
- David Pajo
- Tippmann
- Texas Hold 'Em (song)
- List of films with post-credits scenes
- Django Reinhardt
- Contortion
- LNER Gresley Classes A1 and A3
