• Source: EcoDemonstrator

The ecoDemonstrator Program is a Boeing flight test research program, which has used a series of specially modified aircraft to develop and test aviation technologies designed to improve fuel economy and reduce the noise and ecological footprint of airliners.
Starting in 2012, several aircraft have tested a total of over 250 technologies as of 2024; half remain in further development, but nearly a third have been implemented commercially, such as iPad apps for pilot real-time information to reduce fuel use and emissions; custom approach paths to reduce community noise; and cameras for ground navigation and collision avoidance.
Boeing's named airliner technology programs started in 2001 with the Quiet Technology Demonstrator, and have continued, through the ecoDemonstrator, to the ecoDemonstrator Explorer program announced in 2023.




Quiet Technology Demonstrator program


The ecoDemonstrator program followed the joint Rolls-Royce and Boeing Quiet Technology Demonstrator (QTD) program, which ran in 2001, 2005 and 2018 to develop a quieter engine using chevrons on the rear of the nacelle and exhaust nozzles, as well as an acoustically enhanced inlet liner. In 2001 an American Airlines Boeing 777-200ER with Rolls-Royce Trent 800 engines was used for the flight tests. Much testing was carried out at Glasgow Industrial Airport, Montana, the airport of Boeing's subsidiary, Montana Aviation Research Company (MARCO). The tests were successful, demonstrating better noise reduction than predicted and leading to redesign of wing leading edge de-icing holes to eliminate whistling, a modification which was immediately applied on the 777 production line. Once the QTD2 program began, this program started to be referred to as QTD1.

The resulting design changes were demonstrated in the 2005 Quiet Technology Demonstrator Two (QTD2) program in which a new Boeing 777-300ER, fitted with General Electric GE90-115B engines, was used for a three-week trial, again mainly at Boeing's flight test centre at Glasgow Industrial Airport. As well as the modifications, the aircraft was equipped with extensive sound measurement equipment, and microphone arrays were laid out around the airfield. The chevrons have since been adopted on the Boeing 737 MAX series, 747-8 and 787 Dreamliner aircraft.
Also tested on the QTD2 were streamlined toboggan fairings on the main landing gear to reduce noise.
In 2018 a new design of engine inlet liner was flight tested in a successor program, Quiet Technology Demonstrator 3 (QTD3), using acoustic arrays at Moses Lake, Washington. The NASA-designed inlet was installed in the right-hand nacelle of one of Boeing's two 737 MAX 7 prototypes, powered by CFM International LEAP 1B engines. The testing took place between 27 July and 6 August.




= QTD aircraft summary

=




ecoDemonstrator program


The ecoDemonstrator program was formally launched in 2011, in partnership with American Airlines and the FAA. The first ecoDemonstrator aircraft, a Boeing 737-800, operated during 2012. Since then a different aircraft has been used each year, excepting 2013 and 2017 and a single aircraft from 2022 to 2024, with testing operations lasting from a few weeks to over six months. The testing is usually done in collaboration with many industry partners, including NASA, the FAA, airlines, makers of engines, equipment and software, and academic institutions. The results of the tests are rarely publicised, respecting the confidentiality of the industrial partners. As of 2024 the program has tested over 250 technologies, of which 28% have been implemented, 52% are still under development, and 20% "provided helpful learnings" and were abandoned.
The 2022-4 aircraft, the ninth in the program, wore a special 10th anniversary livery.




= Participating aircraft

=



2012: Boeing 737-800


This was a new aircraft destined for American Airlines and in their livery. With this, the first ecoDemonstrator, Boeing tested laminar flow technology for winglets, improving fuel efficiency by 1.8 percent. This fed directly into the design of the winglets used on the subsequent 737 MAX series. The aircraft tested other technologies, including:

variable area fan nozzle to optimize engine efficiency
regenerative hydrogen fuel cell for aircraft electrical power
adaptive outer wing trailing edges for greater take-off lift and decreased drag in cruise
active engine vibration control
flightpath optimization for operational efficiency
carpet made from recycled materials
sustainable aviation fuel (SAF).



2014: Boeing 787-8

The fourth production 787, a Boeing test airframe, was employed as the second ecoDemonstrator. It conducted 35 projects including:

use of a 15% blend of SAF by both engines for nine flights
acoustic ceramic matrix composite nozzle for weight and noise reduction
aerodynamic and flight control improvements.
advanced wing coatings to reduce ice accumulation.
software applications and connectivity technologies that can improve flight planning, fuel-load optimization, in-flight routing, and landing.
touchscreen displays on the flight deck.
wireless sensors to reduce wiring, reduce weight and save fuel.
outer wing access doors made from recycled 787 carbon fibre.
development of the Airborne Spacing for Terminal Arrival Routes (ASTAR) system to reduce spacing between aircraft on approach to airports.



2015: Boeing 757-200


This aircraft served with United Airlines for 23 years before being used by Boeing for the ecoDemonstrator program. The aircraft was painted in the TUI Group livery as a mark of their collaboration in the project, particularly in the environmental efficiency aspects. NASA's Langley Research Center was also a major participant as part of its Environmentally Responsible Aviation (ERA) project. At the end of the testing period the aircraft was, in conjunction with the Aircraft Fleet Recycling Association and the aircraft lessor Stifel, disassembled for recycling. Around 90% of materials were reused or recycled.
Among the 20 technologies explored were:

improvement of airflow with insect shields and anti-bug coatings on one wing
active flow control over the vertical tail with the aim of increasing efficiency and reducing its size
cabin food cart that converts to a waste cart
green diesel fuel testing.



2016: Embraer E170

The third E170 prototype first flew in 2002 and was retained by Embraer as a test and demonstration aircraft. It was the only non-Boeing aircraft so far to participate as an ecoDemonstrator. Testing projects included:

use of LIDAR to complement existing air data sensors
ice-phobic paint to reduce icing and insect debris buildup
new noise-reducing flaps
special sensors to investigate airflow and improve aerodynamics
use of 10% Brazil-produced bio-fuel and 90% standard kerosene.



2018: Boeing 777F


FedEx supplied a newly delivered 777 freighter for use in the ecoDemonstrator program. After two months of conversion, it was used in the testing program for around three months before restoration to its freighter role. Technologies explored included:

smaller, lighter weight thrust reverser
Safran electrical power distribution system
use of 100% biofuel – the first commercial airliner to be entirely powered by SAF. The engines were not modified in any way
3D printed titanium tail fin cap using waste material and reducing the weight
synthetic ILS using GPS giving increased reliability and potentially allowing reduced separation of aircraft on approach
wake riding, involving flying closely behind another aircraft to give a fuel efficiency increase of up to 10%
LIDAR clear-air turbulence detector
SOCAS – Surface Operations and Collision Avoidance System, merging radar and video images for obstacle detection
FLYHT Aerospace Solutions’ Automated Flight Information Reporting System (AFIRS) for tracking, distress and data-streaming from flight data recorders.



2019: Boeing 777-200


This airliner had served Air China since 2001 before Boeing purchased it to join the ecoDemonstrator program. During testing, the aircraft visited Frankfurt, Germany, as several experiments were sponsored by German organisations including the German Aerospace Center (DLR), Diehl Aerospace, and Fraport. Among the 50 projects trialled were:

recyclable cabin carpet tiles
moisture-absorbent toilet floor made from recycled carbon fibre
chromate-free primer for aluminium parts to reduce manufacturing health risks
sharing digital information between air traffic control (ATC), the flight deck and an airline's operations center to optimize routing efficiency and safety
a connected electronic flight bag (EFB) application to provide re-routing information
connected galleys, lavatories, and cabin temperature and humidity sensors
cameras for an outside view for passengers.



2020: Boeing 787-10


This new aircraft for Etihad Airways was used for just a few weeks between August and October 2020, with testing mainly carried out at Boeing's Glasgow Industrial Airport, Montana. The program included:

noise measurement with over 1400 sensors for internal and external measurements
noise reduction including Safran undercarriage modifications
SAF testing with blends of 30% to 50%
sanitisation methods for the COVID-19 pandemic.
digital text-based ATC routing communications.



2021: Boeing 737 MAX 9


This 5-month program was conducted with a new airframe originally destined for Corendon Dutch Airlines but was painted in a special Alaska Airlines livery with ecoDemonstrator stickers. In October 2021 the aircraft flew from Seattle to Glasgow, Scotland, for the United Nations COP26 Climate Change Conference, bringing executives from Boeing and Alaska Airlines and fuelled by a 50% SAF fuel blend. The testing program included:

low profile anti-collision light for weight and drag reduction and increased visibility
modernised ATC communications including the Inmarsat IRIS satellite communications system
halon-free fire extinguishing (ground testing only)
noise reduction engine nacelles including testing at Glasgow Industrial Airport, Montana
cabin walls made from recycled material
50% SAF blend
atmospheric greenhouse gas measurement system integration for airliners
passenger air vent designs to create an air curtain between seat rows.



2022: Boeing 777-200ER


The aircraft was originally delivered to Singapore Airlines in 2002, and flew most recently for Surinam Airways. It wears a livery celebrating the 10th anniversary of the ecoDemonstrator program. Boeing implied that this aircraft will operate as the ecoDemonstrator test aircraft until 2024. The company stated that the six-month 2022 program would demonstrate 30 new technologies, among which were:

the use of a 30% SAF blend
disinfection of water from sinks for reuse in toilet flushing
weight reduction through 3D printed parts
noise reduction techniques
vortex generators which retract during cruise
head-worn head-up display enhanced vision system
fire-fighting system that does not use Halon
environmentally-friendly galley cooler refrigerant.



= 2023
=
In April 2023 Boeing announced that the 777-200ER would be testing 19 technologies during the year, including:

cargo hold wall panels made from recycled and sustainable materials
fibre-optic fuel quantity sensors compatible with SAF
smart airport maps by Boeing subsidiary Jeppesen for active airport taxiing monitoring for EFBs
all flights to use SAF in the highest available blend
Between 25 June and 29 June 2023 the aircraft operated from London Stansted Airport, performing flights over The Netherlands, Belgium, Germany and the Czech Republic, subsequently returning to its base at Seattle. As of January 2024 no announcement had been made about the purpose of these flights.
In December 2023, in cooperation with Nav Canada, the aircraft taxied from stand to runway at Vancouver International Airport using only digital communications via the EFB, with no voice contact with ATC.



= 2024
=
In May 2024 Boeing announced that the aircraft would be flying its program with a 30/70 mix of SAF and conventional fuel, starting later the same month. Among the 36 technologies to be tested would be:

cabin seat sensors to detect if a passenger leaves their seat during taxiing, takeoff and landing, touchless lavatory and more efficient galleys to increase efficiency and reduce food waste
single-engine taxiing and digital taxi clearances
steeper, continuous landing approaches for noise, fuel and emissions reduction
recyclable, lighter and more durable cabin flooring and ceiling panels
improved cabin insulation and bulkhead and galley acoustic panels.
OLED display screens integrated into cabin structure.
Also tested were enhancements of the Jeppesen EFB which included in-flight fuel saving recommendations and prediction of taxi times using historical and real-time data.
In September 2024 Boeing announced that during this round of testing it had performed 85 ground and 15 flight testing hours, testing 10 technologies, and highlighting the fuel and noise reduction benefits of modified approaches, some of which had already been adopted by the ICAO.
On 9 September the aircraft flew from Seattle to Victorville, California.




= ecoDemonstrator aircraft summary

=
Most information from Planespotters.net

All aircraft apart from the 2022 777 had ecoDemonstrator stickers applied to the fuselage or engine nacelles, at least one retaining them for some time after its participation in the program ended.




ecoDemonstrator Explorer program



In April 2023 Boeing announced a new program, ecoDemonstrator Explorer, using "platforms that will focus on short-term testing of a specific technology"'.




= Projects

=



First project

The first ecoDemonstrator Explorer was a 787-10. using the aircraft's technologies along with coordination with the air navigation service providers (ANSPs) of the US, Japan, Singapore and Thailand to optimise routings for greatest possible efficiency across variables such as weather, air traffic and airspace closures. This is the basis of an international form of trajectory-based operations (TBO), already part of the US FAA's national NextGen project. The ANSPs will coordinate to streamline the flow of traffic through multiple national jurisdictions. The test flights will use the highest available blends of SAF in the process. Boeing expects that the fuel burn could be reduced by up to 10%.

In June 2023 787-10 N8290V (a Boeing test registration) was used for the first Explorer test/demonstration flights. The aircraft, built in 2021 for Vietnam Airlines but not taken up, was unmarked except for basic Boeing logos and “ecoDemonstrator EXPLORER” stickers. It left Seattle on 11 June, flying first to Tokyo (Narita). From there it flew to Singapore (Changi) on 13 June, then on to Bangkok (Suvarnabhumi) on 14 June, and returned direct to Seattle (Everett) on 16 June.
The Civil Aviation Authority of Singapore (CAAS) stated that this was part of a three-year programme. Boeing's chief pilot for product development stated that the TBO system, using technologies already in use aboard many modern airliners, allows pilots and air traffic controllers to make trial route change requests to see the cascading effects of the change on their, and other aircraft's flights, all the way through to airport gate availability, to see if they are likely to be approved.
In October 2023 it was announced that the ANSPs of China, Indonesia, Japan, New Zealand, the Philippines, Singapore, Thailand, and the USA would create a Pathfinder project to demonstrate TBO across the region within four years. Separately the ANSPs of Indonesia, New Zealand and Singapore, along with the Civil Air Navigation Services Organisation (CANSO), and IATA agreed to implement within a year a similar Free Route Operations (FRTO) project to provide routings between defined city pairs.



Second project


On 12 October 2023 Boeing announced a second ecoDemonstrator Explorer project. It evaluated the environmental characteristics of SAF using a new 737 MAX 10 destined for United Airlines. Registered N27602, it made its first flight on 14 September 2023 and wore a special livery with "ecoDemonstrator EXPLORER" titles and "The Future is SAF" markings on the nacelles. It flew running on SAF from one fuel tank, alternating with conventional fuel from another tank. The emissions from the CFM International LEAP 1B engines were sampled by the NASA Douglas DC-8 Airborne Science Lab, registered N817NA, which flew behind the test aircraft. The characteristics of contrails produced were evaluated. Also collaborating on the project are the FAA, GE Aerospace, and the DLR. NASA stated that the test results will be released to the public.

Test flights started on 12 October 2023, based at Everett Paine Field. 11 flights were performed, 8 over Montana and three over the Pacific off the coast of Oregon, at constant altitudes ranging from 30,000 ft (9,100 m) to 38,000 ft (12,000 m). The average duration of each flight was around five hours, generally flying an extended racetrack pattern. At the end of the final test flight on 1 November, the Explorer aircraft returned to Everett while the DC-8 flew back to Plant 42, Palmdale, California.




= ecoDemonstrator Explorer aircraft summary

=




Footnotes






See also


Boeing Truss-Braced Wing
Boeing X-66
Environmental impact of aviation




References






External links


Boeing: Environment
Boeing: ecoDemonstrator

Kata Kunci Pencarian:

• EcoDemonstrator
• Surinam Airways
• Boeing 777
• Boeing 737
• Explorer (disambiguation)
• Boeing Truss-Braced Wing
• Boeing 787 Dreamliner
• Alliant Techsystems
• Boeing 757
• Flight recorder