• Source: Energy management system

An energy management system (EMS) is a system of computer-aided tools used by operators of electric utility grids to monitor, control, and optimize the performance of the generation or transmission system. Also, it can be used in small scale systems like microgrids.




Terminology


The computer technology is also referred to as SCADA/EMS or EMS/SCADA. In these respects, the terminology EMS then excludes the monitoring and control functions, but more specifically refers to the collective suite of power network applications and to the generation control and scheduling applications.
Manufacturers of EMS also commonly supply a corresponding dispatcher training simulator (DTS). This related technology makes use of components of SCADA and EMS as a training tool for control center operators.




Operating systems


Up to the early 1990s it was common to find EMS systems being delivered based on proprietary hardware and operating systems. Back then EMS suppliers such as Harris Controls (now GE), Hitachi, Cebyc, Control Data Corporation, Siemens and Toshiba manufactured their own proprietary hardware. EMS suppliers that did not manufacture their own hardware often relied on products developed by Digital Equipment, Gould Electronics and MODCOMP. The VAX 11/780 from Digital Equipment was a popular choice amongst some EMS suppliers. EMS systems now rely on a model based approach. Traditional planning models and EMS models were always independently maintained and seldom in synchronism with each other. Using EMS software allows planners and operators to share a common model reducing the mismatch between the two and cutting model maintenance by half. Having a common user interface also allows for easier transition of information from planning to operations.
As proprietary systems became uneconomical, EMS suppliers began to deliver solutions based on industry standard hardware platforms such as those from Digital Equipment (later Compaq, then HP), IBM and Sun. The common operating system then was either DEC OpenVMS or Unix. By 2004, various EMS suppliers including Alstom, ABB and OSI had begun to offer Windows based solutions. By 2006 customers had a choice of UNIX, Linux or Windows-based systems. Some suppliers including ETAP, NARI, PSI-CNI and Siemens continue to offer UNIX-based solutions. It is now common for suppliers to integrate UNIX-based solutions on either the Sun Solaris or IBM platform. Newer EMS systems based on blade servers occupy a fraction of the space previously required. For instance, a blade rack of 20 servers occupy much the same space as that previously occupied by a single MicroVAX server.




See also


Energy accounting
Energy conservation measure
Energy management
Energy management software, software to monitor and optimize energy consumption in buildings or communities
Energy storage as a service (ESaaS)
Load management for balancing the supply of electricity on a distribution network.




References






Further reading


EPRI (2005) Advanced Control Room Energy Management System: Requirements and Implementation Guidance. Palo Alto, CA. EPRI report 1010076.
EEMUA 191 Alarm Systems – A Guide to Design, Management and Procurement (1999) ISBN 0-85931-076-0
ASM Consortium (2009) – Effective Alarm Management Practices ISBN 978-1-4421-8425-1
ANSI/ISA–18.2–2009 – Management of Energy Systems for the Process Industries
IEC 62682 Management of Energy systems for the process industries

Kata Kunci Pencarian:

• Energy Management Indonesia
• Elnusa Petrofin
• Astenosfer
• SK Group
• Universitas Multimedia Nusantara
• Energi surya
• Tenaga nuklir
• Pembangkit listrik tenaga panas bumi
• Pertanian berkelanjutan
• Elon Musk
• Energy management system
• Energy management
• Energy management system (building management)
• Management system
• Energy demand management
• Energy system
• Maren (energy management system)
• Building automation
• Energy accounting
• Energy management software