• Source: Fluoroantimonic acid

Fluoroantimonic acid is a mixture of hydrogen fluoride and antimony penta­fluoride, containing various cations and anions (the simplest being H2F+ and Sb F−6). This mixture is a superacid that, in terms of corrosiveness, is trillions of times stronger than pure sulfuric acid when measured by its Hammett acidity function. It even protonates some hydro­carbons to afford pentacoordinate carbo­cations (carbonium ions). Like its precursor hydrogen fluoride, it attacks glass, but can be stored in containers lined with PTFE (Teflon) or PFA.




Chemical composition


Fluoroantimonic acid is formed by combining hydrogen fluoride and antimony pentafluoride:

SbF5 + 2 HF ⇌ SbF−6 + H2F+
The speciation (i.e., the inventory of components) of fluoroantimonic acid is complex. Spectroscopic measurements show that fluoroantimonic acid consists of a mixture of HF-solvated protons, [(HF)nH]+ (such as H3F+2), and SbF5-adducts of fluoride, [(SbF5)nF]– (such as Sb4F−21). Thus, the formula "[H2F]+[SbF6]−" is a convenient but oversimplified approximation of the true composition. Nevertheless, the extreme acidity of this mixture is evident from the inferior proton-accepting ability of the species present in the solution. Hydrogen fluoride, a weak acid in aqueous solution that is normally not thought to have any appreciable Brønsted basicity at all, is in fact the strongest Brønsted base in the mixture, protonating to H2F+ in the same way water protonates to H3O+ in aqueous acid. It is the fluoronium ion that accounts for fluoroantimonic acid's extreme acidity. The protons easily migrate through the solution, moving from H2F+ to HF, when present, by the Grotthuss mechanism.
Two related products have been crystallized from HF-SbF5 mixtures, and both have been analyzed by single crystal X-ray crystallography. These salts have the formulas [H2F+] [Sb2F−11] and [H3F+2] [Sb2F−11]. In both salts, the anion is Sb2F−11. As mentioned above, SbF−6 is weakly basic; the larger anion Sb2F−11 is expected to be a still weaker base.




Acidity


Fluoroantimonic acid is the strongest superacid based on the measured value of its Hammett acidity function (H0), which has been determined for various ratios of HF:SbF5. The H0 of HF is −15. A solution of HF containing 1 mol % of SbF5 is −20. The H0 is −21 for 10 mol%. For > 50 mol % SbF5, the H0 is between −21 and −23. The lowest attained H0 is about -28. The following H0 values show that fluoroantimonic acid is stronger than other superacids. Increased acidity is indicated by smaller (in this case, more negative) values of H0.

Fluoroantimonic acid (−23 > H0 > −28)
Magic acid (H0 = −23)
Carborane acid (H0 < −18)
Fluorosulfuric acid (H0 = −15)
Triflic acid (H0 = −15)
Perchloric acid (H0 = −13)
Of the above, only the carborane acids, whose H0 could not be directly determined due to their high melting points, may be stronger acids than fluoroantimonic acid.
The H0 value measures the protonating ability of the bulk, liquid acid, and this value has been directly determined or estimated for various compositions of the mixture. The pKa on the other hand, measures the equilibrium of proton dissociation of a discrete chemical species when dissolved in a particular solvent. Since fluoroantimonic acid is not a single chemical species, its pKa value is not well-defined.
The gas-phase acidity (GPA) of individual species present in the mixture have been calculated using density functional theory methods. (Solution-phase pKas of these species can, in principle, be estimated by taking into account solvation energies, but do not appear to be reported in the literature as of 2019.) For example, the ion-pair [H2F]+·SbF–6 was estimated to have a GPA of 254 kcal/mol. For comparison, the commonly encountered superacid triflic acid, TfOH, is a substantially weaker acid by this measure, with a GPA of 299 kcal/mol. However, certain carborane superacids have GPAs lower than that of [H2F]+·SbF–6. For example, H(CHB11Cl11) has an experimentally determined GPA of 241 kcal/mol.




Reactions


Fluoroantimonic acid solution is so reactive that it is challenging to identify media with which it is unreactive. Materials compatible with fluoroantimonic acid as a solvent include SO2ClF, and sulfur dioxide; some chlorofluorocarbons have also been used. Containers for HF/SbF5 are made of PTFE.
Fluoroantimonic acid solutions decompose when heated, generating free hydrogen fluoride gas and liquid antimony pentafluoride at a temperature of 40 °C.
As a superacid, fluoroantimonic acid solutions protonate nearly all organic compounds, often causing dehydrogenation, or dehydration. In 1967, Bickel and Hogeveen showed that 2HF·SbF5 reacts with isobutane and neopentane to form carbenium ions:

(CH3)3CH + H+ → (CH3)3C+ + H2
(CH3)4C + H+ → (CH3)3C+ + CH4
It is also used in the synthesis of tetraxenonogold complexes.




Safety



HF/SbF5 is a highly corrosive substance that reacts violently with water. Heating it is dangerous as well, as it decomposes into toxic hydrogen fluoride gas. With superacids that are fuming and toxic, proper personal protective equipment should be used. In addition to the obligatory gloves and goggles, the use of a face shield and respirator are also required. Regular lab gloves are not recommended, as this acid can react with the gloves. Safety gear must be worn at all times when handling or going anywhere near this corrosive substance, as fluoroantimonic acid can protonate every compound in the human body.




See also


Fluoroboric acid
Fluorosulfuric acid
Hexafluorophosphoric acid




References

Kata Kunci Pencarian:

• Superasam
• Asam fluoroantimonat
• Fluoroantimonic acid
• Superacid
• Fluoroantimonate
• Acid strength
• Acid
• Carborane acid
• Sulfuric acid
• Hydrogen fluoride
• Magic acid
• Methanium