• Source: Glyoxal

Glyoxal is an organic compound with the chemical formula OCHCHO. It is the smallest dialdehyde (a compound with two aldehyde groups). It is a crystalline solid, white at low temperatures and yellow near the melting point (15 °C). The liquid is yellow, and the vapor is green.
Pure glyoxal is not commonly encountered because glyoxal is usually handled as a 40% aqueous solution (density near 1.24 g/mL). It forms a series of hydrates, including oligomers. For many purposes, these hydrated oligomers behave equivalently to glyoxal. Glyoxal is produced industrially as a precursor to many products.




Production


Glyoxal was first prepared and named by the German-British chemist Heinrich Debus (1824–1915) by reacting ethanol with nitric acid.
Commercial glyoxal is prepared either by the gas-phase oxidation of ethylene glycol in the presence of a silver or copper catalyst (the Laporte process) or by the liquid-phase oxidation of acetaldehyde with nitric acid.

The first commercial glyoxal source was in Lamotte, France, started in 1960. The single largest commercial source is BASF in Ludwigshafen, Germany, at around 60,000 tons per year. Other production sites exist also in the US and China. Commercial bulk glyoxal is made and reported as a 40% solution in water by weight (approx. 1:5 molar ratio of glyoxal to water).




= Laboratory methods

=
Glyoxal may be synthesized in the laboratory by oxidation of acetaldehyde with selenious acid or by ozonolysis of benzene.
Anhydrous glyoxal is prepared by heating solid glyoxal hydrate(s) with phosphorus pentoxide and condensing the vapors in a cold trap.




Properties


The experimentally determined Henry's law constant of glyoxal is:





K

H


=
4.19
×

10

5


×
exp
⁡

[




6.22
×

10

4




J




mol


−
1



R


×

(



1
T


−


1

298


K





)


]



M




atm


−
1


.


{\displaystyle K_{\text{H}}=4.19\times 10^{5}\times \exp \left[{\frac {6.22\times 10^{4}\,{\text{J}}\,{\text{mol}}^{-1}}{R}}\times \left({\frac {1}{T}}-{\frac {1}{298\,{\text{K}}}}\right)\right]\,{\text{M}}\,{\text{atm}}^{-1}.}





Biochemistry



Advanced glycation end-products (AGEs) are proteins or lipids that become glycated as the result of a high-sugar diet. They are a bio-marker implicated in aging and the development, or worsening, of many degenerative diseases, such as diabetes, atherosclerosis, chronic kidney disease, and Alzheimer's disease.
Guanine bases in DNA can undergo non-enzymatic glycation by glyoxal to form glyoxal-guanine adducts. These adducts may then produce DNA crosslinks. Glycation of DNA may also lead to mutation, breaks in DNA and cytotoxicity. In humans, glyoxal-glycated nucleotides can be repaired by the protein DJ-1 also known as Park7.




Applications


Coated paper and textile finishes use large amounts of glyoxal as a crosslinker for starch-based formulations. It condenses with urea to afford 4,5-dihydroxy-2-imidazolidinone, which further reacts with formaldehyde to give the bis(hydroxymethyl) derivative dimethylol ethylene urea, which is used for wrinkle-resistant chemical treatments of clothing, i.e. permanent press.
Glyoxal is used as a solubilizer and cross-linking agent in polymer chemistry.
Glyoxal is a valuable building block in organic synthesis, especially in the synthesis of heterocycles such as imidazoles. A convenient form of the reagent for use in the laboratory is its bis(hemiacetal) with ethylene glycol, 1,4-dioxane-2,3-diol. This compound is commercially available.
Glyoxal solutions can also be used as a fixative for histology, that is, a method of preserving cells for examining them under a microscope.




Speciation in solution



Glyoxal is supplied typically as a 40% aqueous solution. Like other small aldehydes, glyoxal forms hydrates. Furthermore, the hydrates condense to give a series of oligomers, some of which remain of uncertain structure. For most applications, the exact nature of the species in solution is inconsequential. At least one hydrate of glyoxal is sold commercially, glyoxal trimer dihydrate: [(CHO)2]3(H2O)2 (CAS 4405-13-4).
Other glyoxal equivalents are available, such as the ethylene glycol hemiacetal 1,4-dioxane-trans-2,3-diol (CAS 4845-50-5, m.p. 91–95 °C).
It is estimated that, at concentrations less than 1 M, glyoxal exists predominantly as the monomer or hydrates thereof, i.e., OCHCHO, OCHCH(OH)2, or (HO)2CHCH(OH)2. At concentrations above 1 M, dimers predominate. These dimers are probably dioxolanes, with the formula [(HO)CH]2O2CHCHO. Dimer and trimers precipitate as solids from cold solutions.




Other occurrences


Glyoxal has been observed as a trace gas in the atmosphere, e.g. as an oxidation product of hydrocarbons. Tropospheric concentrations of 0–200 ppt by volume have been reported, in polluted regions up to 1 ppb by volume.




Safety


The LD50 (oral, rats) is 3300 mg/kg, when LD50 of common salt is 3000 mg/kg.




References






External links


"Glyoxal Industrial Applications". BASF.

Kata Kunci Pencarian:

• Asam selenit
• Selenium dioksida
• Glyoxal
• Methylglyoxal
• Imidazole
• Glyoxal-bis(mesitylimine)
• Diacetyl
• Temgicoluril
• IMes
• 2,4,6-Trimethylaniline
• C2H2O2
• Silver