• Source: IBM 3592

The IBM 3592 is a series of enterprise-class tape drives and corresponding magnetic tape data storage media formats developed by IBM. The first drive, having the IBM product number 3592, was introduced under the nickname Jaguar. The next drive was the TS1120, also having the nickname Jaguar. As of October 2023, the latest and current drive is the TS1170. The 3592 line of tape drives and media is not compatible with the IBM 3590 series of drives, which it superseded. This series can store up to 50 TB of data (uncompressed) on a cartridge and has a native data transfer rate of up to 400 MB/s. In August 2023 IBM announced the TS1170 tape drive with 50TB cartridges, more than 2.5 times larger than LTO-9 cartridges.
Like the 3590 and 3480 before it, this tape format has half-inch tape spooled onto 4-by-5-by-1-inch data cartridges containing a single reel. A take-up reel is embedded inside the tape drive. Because of their speed, reliability, durability and low media cost, the 3592 tape drives are still in high demand.
Since TS1120 all drives include built-in encryption processing, with platform software (for example, z/OS Security Server) managing encryption keys. Prior drives require server-based software to encrypt and decrypt tapes.




Drives



Notes
IBM Redbook with information on 3592 models (See sections 2.5 and 2.6)




Cartridges


Unlike many other tape standards, the 3592 format allows an extensive reuse of cartridges already owned. Older generation tapes can be reformatted to higher capacities with every new drive generation, according to the table below. Cartridges are expected to operate in read-and-write mode across at least three drive generations, except in conjunction with technology leaps, e.g. the introduction of BaFe with JC cartridges or SrFe with JF. The observed media replacement rate in large archives is therefore lower than with most other standards.
Reformatting a cartridge means increasing its track density (only), as the linear bit density is limited by the tape coating. In the table below, a 'JA' type cartridge can be reformatted from 300 GB initially to 640 GB in the TS1130 drive. A later 'JB' type cartridge will carry 1 TB since its better coating also permits a higher linear bit density. Generally speaking, linear density is limited by material, semiconductor and signal processing technologies, whereas track density is limited by the servo technology that prevents track runout.

Notes
The TS1150 drive CAN NOT read or write to any Gen 1 or Gen 2 cartridges.
The TS1140 drive CAN read but not write to Gen 1 cartridges of any format, and Gen 2 cartridges in TS1120 format. It can, however, read and write to Gen 2 cartridges in TS1130 format.
The TS1170 drive does not support previous generation 3592 cartridges, only 3592 Type F(JF) cartridge is supported.
3592 media datasheet
IBM 3592 Cartridges and Compatibility




References






See also


Magnetic-tape data storage
Linear Tape-Open, another popular tape format




External links


IBM Tape storage
Fifty years of storage innovation
Read/Write Compatibility Matrix
PC Magazine's Magstar Reference

Kata Kunci Pencarian:

• IBM 3592
• Magnetic-tape data storage
• List of IBM products
• Linear Tape-Open
• IBM 3590
• List of magnetic tape cartridges and cassettes
• Magnetic tape
• Tape drive
• Half-inch tape
• IBM 3480 family