• Source: Isogrid

Isogrid is a type of partially hollowed-out structure formed usually from a single metal plate with integral triangular stiffening stringers. It was patented by McDonnell Douglas (now part of Boeing).
Isogrids are extremely light and stiff. Compared to other materials, it is expensive to manufacture, and so it is restricted to spaceflight applications and some aerospace use.




Theory and design



Isogrid structures are related to sandwich-structured composite panels; both can be modeled using sandwich theory, which describes structures with separated, stiff face sheets and a lighter interconnecting layer. Isogrids are manufactured from single sheets of material and with large-scale triangular openings, and an open pattern to the flanges, compared to closed sheets and foam or honeycomb structures for the sandwich-composite structures.
Isogrid structures are constituted by a thin skin reinforced with a lattice structure. Such structures are adopted in the aeronautical industry since they present both structural resistance and lightness.
The triangular pattern is very efficient because it retains rigidity while saving material and therefore weight. The term isogrid is used because the structure acts like an isotropic material, with equal properties measured in any direction, and grid, referring to the sheet and stiffeners structure.
A similar variant is the orthogrid (sometimes called a waffle grid), which uses rectangular rather than triangular openings. This is not isotropic (has different properties from different angles), but matches many use cases well and is easier to manufacture.
Traditionally, the equilateral triangle pattern was used because it was amenable to simplified analysis.
Since the equilateral triangle pattern has isotropic strength characteristics (no preferential direction), it was named isogrid.




Manufacturing


The stiffeners of an isogrid are generally machined from one face of a single sheet of material such as aluminum with a CNC milling machine. A thickness less than .04 inches (1.0 mm) might require chemical milling processes.
A major push has been made toward additive manufacturing techniques due to a decrease in overall material and production costs and high efficiency and accuracy while providing control over parameters like porosity. Also, the ease of prototype manufacturing for testing purposes has made a huge contribution.
Composite isogrids are rib-skin configurations, where at least a part of the rib is a different material from the skin, the composite assembled by various manual or automated processes.
This can give extremely high strength-weight ratios.




Uses



Isogrid panels form self-stiffened structures where low weight, stiffness, strength and damage tolerance are important, such as in aircraft or space vehicles.
Aerospace isogrid structures include payload shrouds and boosters, which must support the full weight of upper stages and payloads under high G loads. Their open configuration with a single, sealed sheet facing the outside makes them especially useful for propellant tanks for rockets, where sealing the propellant in, but allowing it to drain in use or maintenance are necessary features.




Examples


Some spacecraft and launch vehicles which use isogrid structures include:

Delta families
Atlas families
Skylab spacestation Orbital Workshop module
SLS Core Stage
CST-100 Starliner
Spacex Crew Dragon




= Orthogrid

=
Orthogrid (also known as waffle grid) is similar to isogrid, but with a square pattern; examples include:

Saturn rocket tanks, due to the lower cost and ease of manufacture
Vulcan rocket
New Glenn rocket tanks
Space Launch System core stage tanks




See also


Honeycomb structure
Hollow structural section
Space frame
Speed holes
Truss
Waffle slab, concrete structure similar to orthogrid




References






External links


Isogrid Plate Modeling, Dr Wiliam Case, 1997
Isogrid Design Handbook, NASA CR-124075, McDonnell Douglas, 1973
Advanced Grid Stiffened Composite Structures Archived 2006-04-22 at the Wayback Machine
Isogrid - Shell Structures Tools, 1990 Archived 2011-07-13 at the Wayback Machine
Quarter Isogrid used in Surfboard Construction

Kata Kunci Pencarian:

• Delta IV
• Isogrid
• Boeing Starliner
• Falcon 1
• Delta IV
• Delta II
• Polar Satellite Launch Vehicle
• Diagrid
• Quasicrystal
• Atlas V
• Titan IV