• Source: Japanese Industrial Standards

Japanese Industrial Standards (JIS) (日本産業規格, Nihon Sangyō Kikaku, formerly 日本工業規格 Nihon Kōgyō Kikaku until June 30, 2019) are the standards used for industrial activities in Japan, coordinated by the Japanese Industrial Standards Committee (JISC) and published by the Japanese Standards Association (JSA). The JISC is composed of many nationwide committees and plays a vital role in standardizing activities across Japan.




History


In the Meiji era, private enterprises were responsible for making standards, although the Japanese government too had standards and specification documents for procurement purposes for certain articles, such as munitions.
These were summarized to form an official standard, the Japanese Engineering Standard, in 1921. During World War II, simplified standards were established to increase matériel output.
The present Japanese Standards Association was established in 1946, a year after Japan's defeat in World War II. The Japanese Industrial Standards Committee regulations were promulgated in 1946, and new standards were formed.
The Industrial Standardization Law was enacted in 1949, which forms the legal foundation for the present Japanese Industrial Standards.




= New JIS mark

=
The Industrial Standardization Law was revised in 2004 and the JIS product certification mark was changed; since October 1, 2005, the new JIS mark has been used upon re-certification. Use of the old mark was allowed during a three-year transition period ending on September 30, 2008, and every manufacturer was able to use the new JIS mark. Therefore all JIS-certified Japanese products manufactured since October 1, 2008, have had the new JIS mark.




Standards classification and numbering


Standards are named in the format "JIS X 0208:1997", where X denotes area division, followed by four digits designating the area (five digits for ISO-corresponding standards), and four final digits designating the revision year.
Divisions of JIS and significant standards are:




= A

=
Civil engineering and architecture
JIS A 0001 – Basic module to ISO 1006
JIS A 0002 – Glossary of terms used in building module to ISO 1791
JIS A 0003 – Tolerances for building to ISO 3443-5
JIS A 0004 – Principle of modular coordination in buildings to ISO 2848




= B

=
Mechanical engineering
JIS B 1012 - JIS screw drive, which is not the same as Phillips
JIS B 7021:2013 – Water resistant watches for general use—Classification and water resistance
JIS B 7512:2016 – Steel tape measures
JIS B 7516:2005 – Metal rules




= C

=
Electronics and electrical engineering
JIS C 0920:2003 – Degrees of protection provided by enclosures (IP Code)
JIS C 3202:2014 – Enamelled winding wires
JIS C 5062:2008 – Marking codes for resistors and capacitors
JIS C 5063:1997 – Preferred number series for resistors and capacitors
JIS C 7001 – Type designation system for electronic tubes
JIS C 7012 – Type designation system for discrete semiconductor devices
JIS C 8800:2008 – Glossary of terms for fuel cell power systems




= D

=
Automotive engineering
JIS D 0004-1 – Earth-moving machinery−Scrapers− Part 1 : Terminology and commercial specifications to ISO 7133
JIS D 0004-2 – Earth-moving machinery−Scrapers− Part 2 : Standard form of specifications and testing methods
JIS D 0004-3 – Earth-moving machinery−Scrapers− Part 3 : Bowl volumetric raing to ISO 6485




= E

=
Railway engineering
JIS E 1101 – Flat bottom railway rails and special rails for switches and crossings of non-treated steel to ISO 5003
JIS E 1102 – Fish plates for rails to ISO 6305-1
JIS E 1107 – Steel bolts and nuts for fish-plates and fastenings to ISO 6305-4
JIS E 2001 – Electric traction contact lines−Vocabulary to IEC 60050 (811),IEC 60913
JIS E 4001 – Railway rolling stock-Vocabulary to IEC 60050-811
JIS E 4041 – Rolling stock-Testing of rolling stock on completion of construction and before entry into service to IEC 61133
JIS E 4042 – General rules for the test methods of electric locomotives on completion of construction to IEC 61133
JIS E 4043 – General rules for the test methods of diesel railcar on completion of construction to IEC 61133
JIS E 4044 – General rules for the test methods of diesel locomotives on completion of construction to IEC 61133




= F

=
Ship building
JIS F 0013 - Ships and marine technology-Vocabulary-Deck machinery and outfittings to ISO 3828 & ISO 8147




= G

=
Ferrous materials and metallurgy
JIS G 3101 – Rolled steels for general structure
JIS G 3103 – Carbon steel and molybdenum alloy steel plates for boilers and pressure vessels
JIS G 3106 – Rolled steels for welded structure
JIS G 3108 – Rolled carbon steel for cold-finished steel bars
JIS G 3114 - Hot-rolled atmospheric corrosion resisting steels for welded structure
JIS G 3115 – Steel plates for pressure vessels for intermediate temperature service
JIS G 3118 – Carbon steel plates for pressure vessels for intermediate and moderate temperature services
JIS G 3126 – Carbon steel plates for pressure vessels for low temperature service
JIS G 3141 – Commercial Cold Rolled SPCC Steels
JIS G 4304 – Hot-rolled stainless steel plate, sheet and strip
JIS G 4305 – Cold-rolled stainless steel plate, sheet and strip




= H

=
Nonferrous materials and metallurgy
JIS H 2105 – Pig lead
JIS H 2107 – Zinc ingots
JIS H 2113 – Cadmium metal
JIS H 2116 – Tungsten powder and tungsten carbide powder
JIS H 2118 – Aluminum alloy ingots for die castings
JIS H 2121 – Electrolytic cathode copper
JIS H 2141 – Silver bullion
JIS H 2201 – Zinc alloy ingots for die casting
JIS H 2202 – Copper alloy ingots for castings
JIS H 2211 – Aluminium alloy ingots for castings
JIS H 2501 – Phosphor copper metal
JIS H 3100 – Copper and copper alloy sheets, plates and strips
JIS H 3110 – Phosphor bronze and nickel silver sheets, plates and strips
JIS H 3130 – Copper beryllium alloy, copper titanium alloy, phosphor bronze, copper-nickel-tin alloy and nickel silver sheets, plates and strips for springs
JIS H 3140 – Copper bus bars
JIS H 3250 – Copper and copper alloy rods and bars
JIS H 3260 – Copper and copper alloy wires
JIS H 3270 – Copper beryllium alloy, phosphor bronze and nickel silver rods, bars and wires
JIS H 3300 – Copper and copper alloy seamless pipes and tubes
JIS H 3320 – Copper and copper alloy welded pipes and tubes
JIS H 3330 – Plastic covered copper tubes
JIS H 3401 – Pipe fittings of copper and copper alloys
JIS H 4000 – Aluminum and aluminum alloy sheets and plates, strips and coiled sheets
JIS H 4001 – Painted aluminum and aluminum alloy sheets and strips
JIS H 4040 – Aluminum and aluminum alloy rods, bars and wires
JIS H 4080 – Aluminum and aluminum alloys extruded tubes and cold-drawn tubes
JIS H 4090 – Aluminum and aluminum alloy welded pipes and tubes
JIS H 4100 – Aluminum and aluminum alloy extruded shape
JIS H 4160 – Aluminum and aluminum alloy foils
JIS H 4170 – High purity aluminum foils
JIS H 4301 – Lead and lead alloy sheets and plates
JIS H 4303 – DM lead sheets and plates
JIS H 4311 – Lead and lead alloy tubes for common industries
JIS H 4461 – Tungsten wires for lighting and electronic equipment
JIS H 4463 – Thoriated tungsten wires and rods for lighting and electronic equipment
JIS H 4631 – Titanium and titanium alloy tubes for heat exchangers
JIS H 4635 – Titanium and titanium alloy welded pipes
JIS H 5401 – White metal
JIS H 8300 – Thermal spraying―zinc, aluminum and their alloys
JIS H 8601 – Anodic oxide coatings on aluminum and aluminum alloys
JIS H 8602 – Combined coatings of anodic oxide and organic coatings on aluminum and aluminum alloys
JIS H 8615 – Electroplated coatings of chromium for engineering purposes
JIS H 8641 – Zinc hot dip galvanizing
JIS H 8642 – Hot dip aluminized coatings on ferrous products




= K

=
Chemical engineering
JIS K 0061 - Test methods for density and relative density of chemical products to ISO 758




= L

=
Textile engineering




= M

=
Mining




= P

=
Pulp and paper
JIS P 0138 - Writing paper and certain classes of printed matter −Trimmed sizes−A and B series to ISO 216
JIS P 0138-61 (JIS P 0138:1998) - Process finished paper size (ISO 216 with a slightly larger B series)




= Q

=
Management systems
JIS Q 0073 - Risk management-Vocabulary
JIS Q 9000 - Quality management systems-Fundamentals and vocabulary to ISO 9000
JIS Q 9001 - Quality management systems - requirements
JIS Q 9002 - Quality management systems - Guidelines for the application of JIS Q 9001
JIS Q 9004 - Quality management - Quality of an organization - Guidance to achieve sustained success
JIS Q 9005 - Quality management systems - Guidelines for sustained success
JIS Q 10002 - Quality management-Customer satisfaction- Guidelines for complaints handling in organizations to ISO 10002
JIS Q 14001 - Environment management systems - requirements with guidance for use
JIS Q 15001 - Personal information protection management systems - requirements
JIS Q 20000-1 - IT service management - specification
JIS Q 21500 - Guidance on project management to ISO 21500
JIS Q 22300 - Societal security-Terminology to ISO 22300
JIS Q 22301 - Security and resilience-Business continuity management systems-Requirements to ISO 22301
JIS Q 22313 - Societal security-Business continuity management systems-Guidance to ISO 22313
JIS Q 27001 - Information security management systems - requirements
JIS Q 31000 - Risk management-Guidelines to ISO 31000
JIS Q 31010 - Risk management-Risk assessment techniques to ISO/IEC 31010




= R

=
Ceramics




= S

=
Domestic wares
JIS S 5037 – Sizing system for shoes to ISO 9407




= T

=
Medical equipment and safety appliances




= W

=
Aircraft and aviation
JIS W 0111 – Flight dynamics−Concepts, quantities and symbols−Part 1 : Aircraft motion relative to the air to ISO 1151-1
JIS W 0112 – Flight dynamics−Concepts, quantities and symbols−Part 2 : Motions of the aircraft and the atmosphere relative to the Earth to ISO 1151-2
JIS W 0113 – Flight dynamics−Concepts, quantities and symbols−Part 3 : Derivatives of forces, moments and their coefficients to ISO 1151-3
JIS W 0114 – Flight dynamics−Concepts, quantities and symbols−Part：4 Concepts, quantities and symbols used in the study of aircraft stability and control to ISO 1151-4
JIS W 0115 – Flight dynamics−Concepts, quantities and symbols−Part 5 : Quantities used in measurements to ISO 1151-5
JIS W 0116 – Flight dynamics−Concepts, quantities and symbols−Part 6 : Aircraft geometry to ISO 1151-6
JIS W 0117 – Flight dynamics−Concepts, quantities and symbols−Part 7 : Flight points and flight envelopes to ISO 1151-7
JIS W 0118 – Flight dynamics−Concepts, quantities and symbols−Part 8 : Concepts and quantities used in thestudy of the dynamic behaviour of the aircraft to ISO 1151-8
JIS W 0119 – Flight dynamics−Concepts, quantities and symbols−Part 9：Models of atmospheric motions along the trajectory of the aircraft to ISO 1151-9
JIS W 0125-1 – Aerospace−Fluid systems−Vocabulary−Part 1 : General terms and definitions relating to pressure to ISO 8625-1
JIS W 0125-2 – Aerospace−Fluid systems−Vocabulary−Part 2 : General terms and definitions relating to flow to ISO 8625-2
JIS W 0125-3 – Aerospace−Fluid systems−Vocabulary−Part 3 : General terms and definitions relating to temperature to ISO 8625-3




= X

=
Information processing
JIS X 0201:1997 – Japanese national variant of the ISO 646 7-bit character set
JIS X 0202:1998 – Japanese national standard which corresponds to the ISO 2022 character encoding
JIS X 0208:1997 – 7-bit and 8-bit double byte coded kanji sets for information interchange
JIS X 0212:1990 – Supplementary Japanese graphic character set for information interchange
JIS X 0213:2004 – 7-bit and 8-bit double byte coded extended Kanji sets for information interchange
JIS X 0221-1:2001 – Japanese national standard which corresponds to ISO 10646
JIS X 0401:1973 – Todofuken (prefecture) identification code
JIS X 0402:2003 – Identification code for cities, towns and villages
JIS X 0405:1994 – Commodity classification code
JIS X 0408:2004 – Identification code for universities and colleges
JIS X 0501:1985 – Bar code symbol for uniform commodity code
JIS X 0510:2004 – QR code
JIS X 3001-1:2009, JIS X 3001-2:2002, JIS X 3001-3:2000 – Fortran programming language
JIS X 3002:2001 – COBOL
JIS X 3005-1:2010 – SQL
JIS X 3010:2003 – C programming language
JIS X 3014:2003 – C++
JIS X 3017:2011, JIS X 3017:2013 – Programming languages – Ruby
JIS X 3030:1994 – POSIX - repealed in 2010
JIS X 4061:1996 – Collation of Japanese character string
JIS X 6002:1980 – Keyboard layout for information processing using the JIS 7 bit coded character set
JIS X 6054-1:1999 – MIDI
JIS X 6241:2004 – 120 mm DVD – Read-only disk
JIS X 6243:1998 – 120 mm DVD Rewritable Disk (DVD-RAM)
JIS X 6245:1999 – 80 mm (1.23 GB/side) and 120 mm (3.95 GB/side) DVD-Recordable-Disk (DVD-R)
JIS X 6302-6:2011 - Identification cards—Recording technique—Part 6: Magnetic stripe—High coercivity
JIS X 9051:1984 – 16-dots matrix character patterns for display devices
JIS X 9052:1983 – 24-dots matrix character patterns for dot printers




= Z

=
Miscellaneous
JIS Z 0310 – Abrasive blast-cleaning methods for surface preparation to ISO 8504
JIS Z 2241 – Metallic materials — Tensile testing — Method of test at room temperature to ISO 6892
JIS Z 2305 – Non-destructive testing-Qualification and certification of NDT personnel to ISO 9712
JIS Z 2371 – Methods of salt spray testing
JIS Z 3001-1 – Welding and allied processes -- Vocabulary -- Part 1: General
JIS Z 3001-2 – Welding and allied processes -- Vocabulary -- Part 2: Welding processes
JIS Z 3001-3 – Welding and allied processes -- Vocabulary -- Part 3: Soldering and brazing
JIS Z 3001-4 – Welding and allied processes -- Vocabulary -- Part 4: Imperfections in welding
JIS Z 3001-5 – Welding and allied processes -- Vocabulary -- Part 5: Laser welding
JIS Z 3001-6 – Welding and allied processes -- Vocabulary -- Part 6: Resistance welding
JIS Z 3001-7 – Welding and allied processes -- Vocabulary -- Part 7: Arc welding
JIS Z 3011 – Welding positions defined by means of angles of slope and rotation
JIS Z 3021 – Welding and allied processes -- Symbolic representation
JIS Z 8000-1 – Quantities and units -- Part 1: General
JIS Z 8000-2 – Quantities and units -- Part 2: Mathematics
JIS Z 8000-3 – Quantities and units -- Part 3: Space and time
JIS Z 8000-4 – Quantities and units -- Part 4: Mechanics
JIS Z 8000-5 – Quantities and units -- Part 5: Thermodynamics
JIS Z 8102 – Names of non-luminous object colours
JIS Z 8210 – Public Information Symbols
JIS Z 8301 – Rules for the layout and drafting of Japanese Industrial Standards
JIS Z 9098 – Hazard specific evacuation guidance sign system
JIS Z 9112 – Classification of fluorescent lamps and light emitting diodes by chromaticity and colour rendering property




See also


International Organization for Standardization (ISO)
International Electrotechnical Commission (IEC)
Japanese Agricultural Standards
Korean Standards Association
Japanese typographic symbols – gives the Unicode symbol for the Japanese industrial standard
List of JIS categories (in Japanese)




References






External links


Japanese Industrial Standards Committee
Japanese Standards Association
Korean Standards Association
List of Japanese Standards JIS G – Ferrous Materials and Metallurgy
Details on the history of JIS (in Japanese)
JIS in decodeunicode JIS-Logo in Unicode
JIS search system (in Japanese)

Kata Kunci Pencarian:

• JIS
• Stapler
• Bilangan oktan
• Jepang
• Mononatrium glutamat
• Asam sitrat
• Keanekaragaman hayati
• Sejarah ekonomi Jepang
• Timbal
• Godzilla Minus One
• Japanese Industrial Standards
• Japanese Industrial Standards Committee
• Japanese Standards Association
• Japanese Agricultural Standard
• List of welding codes
• Shift JIS
• Standards organization
• Kanji
• Japan MIDI Standards Committee
• JIS