• Source: L. B. Billinton

Lawson Butzkopfski (or Boskovsky) Billinton (4 February 1882 – 19 November 1954) was the Locomotive Engineer of the London, Brighton and South Coast Railway from 1912 until the company became part of the Southern Railway in 1923. He joined the LBSCR in 1900 as an apprentice. By the end of 1907 he was a district locomotive superintendent at the railway works at New Cross. From February 1911 Billinton was locum tenens, or caretaker, for Locomotive Engineer D. E. (Earle) Marsh at Brighton works whilst Marsh was on leave of absence due to ill health. Earle Marsh resigned in July 1911. Billinton was promoted to Locomotive Engineer at the beginning of 1912.
In 1917 Billinton was commissioned as a temporary lieutenant colonel in the Royal Engineers, and he served on military missions to Romania and Russia. He retired from the SR aged 40 in 1923, taking up fruit farming at Bolney in Sussex. Billinton died in 1954 at Lyme Regis in Dorset.




Early career


Lawson Billinton was born in Brighton, the third son of R. J. Billinton, who later became the LBSCR's Locomotive Engineer in 1890. His mother was of Polish origin and his middle name Butzkopfski (sometimes spelled Boskovsky) was her family name. He became a pupil of his father at Brighton works in January 1900. He was a fitter's apprentice from September 1900. In February 1903 he was promoted to draughtsman, and promoted again in September 1903 to inspector of materials. In September 1904 he became assistant foreman at New Cross. R. J. Billinton died in office in November 1904, and was succeeded as Locomotive Engineer by D. E. (Earle) Marsh.
Earle Marsh placed Lawson Billinton in charge of all experimental work on the LBSCR's locomotives and rolling stock, including the trials of the new Marsh Atlantics. In January 1906 Billinton was transferred to Brighton as assistant outdoor superintendent, moving back to New Cross in February 1907 and becoming district locomotive superintendent in July of that year.
The reconstruction of Brighton works under Marsh caused tremendous difficulties in maintaining and repairing the LBSCR's locomotive stock. Some major repairs and boiler changes began to be carried out at New Cross under Billinton's supervision, but this had little effect on the situation. By 1910 about 30% of the locomotive stock was out of traffic and awaiting repair, and the number of engine failures in service increased substantially in the second half of that year, for which Marsh was held responsible by the directors of the company. Because Earle Marsh was in poor health he was given leave of absence until 30 June 1911, and Billinton was instructed to take general charge of Brighton works as Marsh's locum tenens or caretaker from 15 February 1911.




Locomotive Engineer


Marsh resigned his post on 1 July 1911. The LBSCR's board of directors initially approached Robert Urie of the London and South Western Railway to be Marsh's successor, but he declined. Instead Billinton was appointed Locomotive Engineer from 1 January 1912 with a starting salary of £1,500 per annum, "with management and control of engine construction and repair shops at Brighton and other locomotive depots, and of the work and business to be carried out and done therein." Marsh had been in charge of all the LBSCR's rolling stock, but the board of directors now created a Carriage and Wagon Department at Lancing to be run independently of Billinton's department, to reduce the workload of the Locomotive Engineer. Both Billinton and A. H. Panter, head of the Lancing carriage department, were now required to submit all their proposals for new construction to the LBSCR Locomotive Committee, and proposals for alterations of existing stock to the Superintendent of the Line and the general manager.
Under construction at the time of Billinton's promotion were Marsh-designed locomotives of the H2, J and I3 classes.
The six members of the H2 class were a superheated development of the H1 Marsh Atlantics, authorised in April 1911 and entering traffic between June 1911 and January 1912, with minor alterations to Marsh's original design by Billinton. The prototype 4-6-2 J tank locomotive, no. 325, was completed in December 1910; construction of the second engine, no. 326, started in May 1911. Since a number of problems were being experienced with no. 325 in traffic Billinton was given permission to halt work on no. 326 in June to concentrate on repairs to existing stock and construction of the H2 class. By the beginning of 1912, when construction recommenced, Billinton had modified the design sufficiently for the locomotive to be given the class designation J2 (the prototype becoming J1). Modifications included replacement of the Stephenson valve gear with Walschaerts gear, a reduction in water tank capacity and the use of spiral springs in the suspension instead of leaf springs. Although no. 326 had better acceleration and a faster top speed than no. 325 no further members of the class were built, in part because the 10 members of the superheated I3 4-4-2 class built between August 1912 and March 1913 proved to be the equal of the J2 class in performance and reliability.
Billinton introduced the E2 class 0-6-0T and the K class 2-6-0 of 1913, and the L class 4-6-4T of 1914.
The first Billinton-designed class was the 0-6-0T E2 class of shunting engine, five of which were introduced between June 1913 and January 1914. Two of the class were fitted with equipment for operating passenger trains, and used on six-coach sets in the south London area. Oscillating whilst accelerating, unsteady at speed and with a tendency to throw live coals out of the chimney the locomotives were soon returned to shunting duties. In September 1913 the first of the 2-6-0 K class locomotives entered traffic. These locomotives were intended to fulfill the need to accelerate the speed of goods traffic on the congested London suburban lines. They were fitted with parallel superheated boilers with Belpaire fireboxes (the first such on the LBSCR) and were capable of hauling 1,000 ton trains at an average speed of 30 to 35 mph. The five locomotives of the initial batch were successful enough in working munitions trains to Newhaven at the beginning of World War I for the Government to grant permission for the construction of five more of the class, eventually constructed at the end of 1916.
In October 1913 Billinton ordered the design of an enlarged version of the J class tank, with the trailing truck replaced by a bogie. This 4-6-4 or Baltic wheel arrangement was intended to be more stable at speed than the 4-6-2 arrangement of the original design. An order for five locomotives was placed with Brighton Works in November 1913, and the first, no. 327, was completed in April 1914. Construction of the second member of the class, no. 328, was interrupted whilst no. 327 was tested. As at the same time Billinton began a project to design and construct an express 4-6-0 tender locomotive, it has been suggested that he may have been intending to complete no. 328 as such. No. 327 was involved in a couple of minor derailments in August and November 1914, which were ascribed to the surging movement of water in half-full side tanks. The locomotive was withdrawn from service whilst consideration was given to its conversion to a tender engine. Billinton instructed the drawing office in February 1915 to cost both a conversion scheme and a scheme to modify the side tanks to improve stability. As costs appeared to be almost equal it was decided to complete no. 328 as a tank engine, and to modify both locomotives by inserting a well tank between the frames and restricting the depth of water in the side tanks. By the time no. 328 was completed in March 1916 the order for the remaining three locomotives had been cancelled because of wartime material shortages, and nos. 327 and 328 remained the only members of the L class until 1919.




Wartime service


In March 1917 Billinton was commissioned as a temporary lieutenant colonel in the Royal Engineers. He commenced active service on 17 March, and was seconded to the British Railway Mission to Russia and Romania, under General de Candolle. Billinton left for Romania on 18 March, travelling via Sweden and Russia. Arriving in Iaşi (then the temporary capital of Romania) he found that over 60% of the locomotives of the Căile Ferate Române were out of commission or under repair, and Billinton travelled around Romania reorganising. The military situation in Romania rapidly deteriorated through 1917 as the Russian armies in the country began to collapse. Billinton organised the withdrawal of locomotives and rolling stock from Galicia. In October 1917 the Mission was ordered to the Caucasus. By February 1918 they were in Rostov on Don just prior to the city's capture by the Red Army. Billinton received orders to go to Petrograd with dispatches for the British Ambassador. Arriving in Moscow he met the British Consul General, who informed him that the Ambassador had probably left for Finland. Billinton eventually left Russia via Vladivostok, returning to Britain in June 1918. He was allowed to return to the LBSCR on leave without pay, returning to duty on 25 November 1918 as Head of the British Military Mission to Romania in connection with the reorganisation and reconstruction of the railway system in that country. He was appointed a CBE (3rd Class Military Division) in June 1919.




Post-war career


Billinton was released from military service on 3 August 1919. Brighton Works was in the immediate post-war years working to full capacity just to clear the backlog of repairs to the locomotive stock. At this time Billinton introduced a top-feed arrangement inside a second dome on replacement boilers. The first new locomotives to be built postwar were seven of a batch of ten K class 2-6-0s, the first being finished in December 1920. Construction of the last three of the batch was cancelled by March 1921. These locomotives were used by Billinton to test various manufacturer's equipment, including feedwater heaters, blastpipes and sanding equipment.
A further batch of five L class 4-6-4 tank locomotives was started in July 1921 and completed between October 1921 and April 1922. The last of the batch, no. 333 was dedicated as a War Memorial Engine in April 1923 and named Remembrance.
Billinton's final contribution was to order the rebuilding of 12 B4 4-4-0 locomotives, which were fitted with K class type boilers and new frames. Only two were completed by the LBSCR in 1922, the remainder being converted by the Southern Railway. Although the B4x class (as it was designated) now had larger and more modern superheated boilers the rebuilds retained the valve gear of the originals, with the result that the locomotives were throttled by small short-travel valves which could not pass the steam needed for an improved performance. By 1930 the class were relegated from main line duties.
The amalgamation of the LBSCR into the Southern Railway Group in 1923. Richard Maunsell became Chief Mechanical Engineer. Billinton took early retirement, leaving his position on 30 June 1923. Shortly afterwards Brighton Works was demoted to a repair depot for locomotives. He purchased a farm near Bolney in Sussex, on which he and his wife grew fruit commercially. Billinton spent two years in Glasgow in the late 1920s as a consultant to the LMS.
Billinton died on 26 November 1954 at Lyme Regis.




Legacy


Billinton Way, a short street in Brighton's New England Quarter, built 2004–2008 on the site of the former Brighton railway works, was named after him.




References






Bibliography

Kata Kunci Pencarian:

• L. B. Billinton
• Billinton
• LB&SCR L class
• Locomotives of the Southern Railway (UK)
• LB&SCR B4 class
• LB&SCR E2 class
• LB&SCR K class
• 1882 in rail transport
• Thomas the Tank Engine
• LB&SCR H2 class