• Source: Lap Engine

The Lap Engine is a beam engine designed by James Watt, built by Boulton and Watt in 1788. It is now preserved at the Science Museum, London.
It is important as both an early example of a beam engine by Boulton and Watt, and also mainly as illustrating an important innovative step in their development for its ability to produce rotary motion.
The engines name comes from its use in Matthew Boulton's Soho Manufactory, where it was used to drive a line of 43 polishing or lapping machines, used for the production of buttons and buckles.




Innovations



Watt did not invent the steam engine and there is no single 'Watt steam engine' as such. He developed a number of separate innovations, each of which improved the existing engines of the day, beginning with Newcomen's. The Lap Engine of 1788, also the Whitbread Engine (1785), represent survivors of the first engines to show all of Watt's major improvements in one.




= Parallel motion

=




= Rotative beam engines

=




= Sun and planet gear

=

The rotative beam engine needs a means to convert reciprocating motion of the piston and beam to rotary motion. The crankshaft was well known for centuries before Watt, mostly from its use in mining machinery powered by water wheels. However its use for a steam engine was covered by James Pickard's patent at this time. Watt was unwilling to pay a license fee to use the crank and so sought an alternative. The sun and planet gear was invented by another Scottish engineer, William Murdoch, an employee of Boulton and Watt. Watt patented it in October 1781.
The sun and planet gear is a simple epicyclic gear. The planet is attached rigidly to the end of the connecting rod, hung from the beam. As it rotates it applies a torque to the sun gear, just as for a crank, and so causes it to rotate. As the two gears also rotate relative to each other, like conventional gearwheels, this has the effect of giving the sun gear a further rotation. The sun, and the output crankshaft, thus rotates twice for every piston cycle of the engine, twice as fast as with a conventional crank. Beam engines were slow-moving and the output shafts driven by the Lap Engine were fast-moving, so this was an advantage.




= Centrifugal governor

=

According to the Science Museum, it was the first steam engine to be fitted with a centrifugal governor.




History






Preservation






Notes






References






Further reading


"Watt's Lap Engine". Model Engineer. Vol. 146, no. 3626. 1 February 1980.

Kata Kunci Pencarian:

• Engine Sentai Go-onger
• MotoGP musim 2012
• Le Mans 24 Jam 2011
• Daytona 500 2014
• Daihatsu Ayla
• Grand Prix F1 Australia 1987
• Grand Prix sepeda motor Qatar 2016
• Mesin Formula Satu
• Nicky Hayden
• Grand Prix F1 Australia 2001
• Lap Engine
• Steam engine
• Engine Sentai Go-onger
• List of Nürburgring Nordschleife lap times
• History of the steam engine
• 1981 Italian Grand Prix
• Stationary steam engine
• Nissan GT-R
• Dodge Viper
• Thomas Newcomen