- Source: Laser detuning
In optical physics, laser detuning is the tuning of a laser to a frequency that is slightly off from a quantum system's resonant frequency. When used as a noun, the laser detuning is the difference between the resonance frequency of the system and the laser's optical frequency (or wavelength). Lasers tuned to a frequency below the resonant frequency are called red-detuned, and lasers tuned above resonance are called blue-detuned.
Illustration
Consider a system with a resonance frequency
ω
0
{\displaystyle \omega _{0}}
in the optical frequency range of the electromagnetic spectrum, i.e. with frequency of a few THz to a few PHz, or equivalently with a wavelength in the range of 10 nm to 100 μm. If this system is excited by a laser with a frequency
ω
L
{\displaystyle \omega _{L}}
close to this value, the laser detuning is then defined as:
Δ
ω
=
d
e
f
ω
L
−
ω
0
{\displaystyle \Delta \omega \ {\overset {\underset {\mathrm {def} }{}}{=}}\ \omega _{L}-\omega _{0}}
The most common examples of such resonant systems in the optical frequency range are optical cavities (free-space, fiber or microcavities), atoms, and dielectrics or semiconductors.
The laser detuning is important for a resonant system such as a cavity because it determines the phase (modulo 2π) acquired by the laser field per roundtrip. This is important for linear optical processes such as interference and scattering, and extremely important for nonlinear optical processes because it affects the phase-matching condition.
Applications
= Laser cooling of atoms
=Lasers can be detuned in the lab frame so that they are Doppler shifted to the resonant frequency in a moving system, which allows lasers to affect only atoms moving at a specific speed or in a specific direction and makes laser detuning a central tool of laser cooling and magneto-optical traps.
= Optomechanics
=Similar to the laser cooling of atoms, the sign of the detuning plays an important part in Optomechanical applications. In the red detuned regime, the optomechanical system undergoes cooling and coherent energy transfer between the light and the mechanical mode (a "beam splitter"). In the blue-detuned regime, it undergoes heating, mechanical amplification and possibly squeezing and entanglement. The on-resonance case when the laser detuning is zero, can be used for very sensitive detection of mechanical motion, such as used in LIGO.
= Pound-Drever-Hall technique
=Another application of laser detuning is in laser stabilization. The Pound-Drever-Hall technique is a method of laser stabilization which employs red and blue detuned sidebands of a carrier laser. The intensity of light reflected off a cavity is used to gauge the wavelength of a laser. Minimal reflection corresponds with the laser frequency being resonant with the cavity and so the frequency is modulated to minimize the reflected power. However, the reflection off a cavity is an even function so it cannot tell you which direction the outputted laser frequency needs to move to match the cavity's resonant frequency. The sidebands are used to approximate the slope of a reflection function as a function of frequency, generating an odd error function that can be used for locking a laser by telling you what direction the frequency needs to move.
References
Kata Kunci Pencarian:
- Laser detuning
- Detuning
- Mølmer–Sørensen gate
- List of laser articles
- Cavity optomechanics
- Laser cooling
- Optical molasses
- Resolved sideband cooling
- Magneto-optical trap
- Autler–Townes effect
