• Source: Leapmotor S01

The Leapmotor S01 (Chinese: 零跑S01; pinyin: Língpǎo S01), previously known as the Leapmotor LP-S01, is an all-electric car produced by Chinese automobile manufacturer Leapmotor.




History



A prototype of the S01 was shown at the Guangzhou Auto Show 2017. At that time, the company had raised 380 million in capital, and construction of the factory had started. The S01 is the brand's first vehicle.
First deliveries occurred in June 2019.




Overview


The car is a coupe with 2+2 seating. The top version, powered by a 168 hp (125 kW; 170 PS) electric motor and 250 N⋅m (184 lb⋅ft), accelerates from 0 to 100 km/h (0 to 62 mph) in 6.9 seconds. The motor is a permanent magnet synchronous motor.
The vehicle combines small height and small width (hence the small frontal area) with an aerodynamic side profile and a relatively low mass for an EV (the manufacturer does not specify it on its website, but one previous announcement indicated a mass of only 1240 kg).
The car features level 2 autonomous driving (called "Leap Pilot"), with a possibility of enabling level 3 autonomous driving in the future through over-the-air updates.
As of March 2020, two battery options - 35.6 kWh and 48 kWh - are available. Typically for Chinese cars, the range is given only according to the overly optimistic NEDC methodology, no longer in use in Europe. However, with a 48 kWh battery and given the car's small dimensions, the EPA range can be reasonably estimated at not less than 190 miles (310 km).




Pricing


Prices as of March 2020, after subsidies:




References

Kata Kunci Pencarian:

• Leapmotor S01
• Leapmotor
• Leapmotor T03
• Leapmotor C11
• Leapmotor C01
• Leapmotor C10
• S1
• List of battery electric vehicles