• Source: Linear predictive coding

Linear predictive coding (LPC) is a method used mostly in audio signal processing and speech processing for representing the spectral envelope of a digital signal of speech in compressed form, using the information of a linear predictive model.
LPC is the most widely used method in speech coding and speech synthesis. It is a powerful speech analysis technique, and a useful method for encoding good quality speech at a low bit rate.




Overview


LPC starts with the assumption that a speech signal is produced by a buzzer at the end of a tube (for voiced sounds), with occasional added hissing and popping sounds (for voiceless sounds such as sibilants and plosives). Although apparently crude, this Source–filter model is actually a close approximation of the reality of speech production. The glottis (the space between the vocal folds) produces the buzz, which is characterized by its intensity (loudness) and frequency (pitch). The vocal tract (the throat and mouth) forms the tube, which is characterized by its resonances; these resonances give rise to formants, or enhanced frequency bands in the sound produced. Hisses and pops are generated by the action of the tongue, lips and throat during sibilants and plosives.
LPC analyzes the speech signal by estimating the formants, removing their effects from the speech signal, and estimating the intensity and frequency of the remaining buzz. The process of removing the formants is called inverse filtering, and the remaining signal after the subtraction of the filtered modeled signal is called the residue.
The numbers which describe the intensity and frequency of the buzz, the formants, and the residue signal, can be stored or transmitted somewhere else. LPC synthesizes the speech signal by reversing the process: use the buzz parameters and the residue to create a source signal, use the formants to create a filter (which represents the tube), and run the source through the filter, resulting in speech.
Because speech signals vary with time, this process is done on short chunks of the speech signal, which are called frames; generally, 30 to 50 frames per second give an intelligible speech with good compression.




Early history


Linear prediction (signal estimation) goes back to at least the 1940s when Norbert Wiener developed a mathematical theory for calculating the best filters and predictors for detecting signals hidden in noise. Soon after Claude Shannon established a general theory of coding, work on predictive coding was done by C. Chapin Cutler, Bernard M. Oliver and Henry C. Harrison. Peter Elias in 1955 published two papers on predictive coding of signals.
Linear predictors were applied to speech analysis independently by Fumitada Itakura of Nagoya University and Shuzo Saito of Nippon Telegraph and Telephone in 1966 and in 1967 by Bishnu S. Atal, Manfred R. Schroeder and John Burg. Itakura and Saito described a statistical approach based on maximum likelihood estimation; Atal and Schroeder described an adaptive linear predictor approach; Burg outlined an approach based on principle of maximum entropy.
In 1969, Itakura and Saito introduced method based on partial correlation (PARCOR), Glen Culler proposed real-time speech encoding, and Bishnu S. Atal presented an LPC speech coder at the Annual Meeting of the Acoustical Society of America. In 1971, realtime LPC using 16-bit LPC hardware was demonstrated by Philco-Ford; four units were sold. LPC technology was advanced by Bishnu Atal and Manfred Schroeder during the 1970s–1980s. In 1978, Atal and Vishwanath et al. of BBN developed the first variable-rate LPC algorithm. The same year, Atal and Manfred R. Schroeder at Bell Labs proposed an LPC speech codec called adaptive predictive coding, which used a psychoacoustic coding algorithm exploiting the masking properties of the human ear. This later became the basis for the perceptual coding technique used by the MP3 audio compression format, introduced in 1993. Code-excited linear prediction (CELP) was developed by Schroeder and Atal in 1985.
LPC is the basis for voice-over-IP (VoIP) technology. In 1972, Bob Kahn of ARPA with Jim Forgie of Lincoln Laboratory (LL) and Dave Walden of BBN Technologies started the first developments in packetized speech, which would eventually lead to voice-over-IP technology. In 1973, according to Lincoln Laboratory informal history, the first real-time 2400 bit/s LPC was implemented by Ed Hofstetter. In 1974, the first real-time two-way LPC packet speech communication was accomplished over the ARPANET at 3500 bit/s between Culler-Harrison and Lincoln Laboratory. In 1976, the first LPC conference took place over the ARPANET using the Network Voice Protocol, between Culler-Harrison, ISI, SRI, and LL at 3500 bit/s.




LPC coefficient representations


LPC is frequently used for transmitting spectral envelope information, and as such it has to be tolerant of transmission errors. Transmission of the filter coefficients directly (see linear prediction for a definition of coefficients) is undesirable, since they are very sensitive to errors. In other words, a very small error can distort the whole spectrum, or worse, a small error might make the prediction filter unstable.
There are more advanced representations such as log area ratios (LAR), line spectral pairs (LSP) decomposition and reflection coefficients. Of these, especially LSP decomposition has gained popularity since it ensures the stability of the predictor, and spectral errors are local for small coefficient deviations.




Applications


LPC is the most widely used method in speech coding and speech synthesis. It is generally used for speech analysis and resynthesis. It is used as a form of voice compression by phone companies, such as in the GSM standard, for example. It is also used for secure wireless, where voice must be digitized, encrypted and sent over a narrow voice channel; an early example of this is the US government's Navajo I.
LPC synthesis can be used to construct vocoders where musical instruments are used as an excitation signal to the time-varying filter estimated from a singer's speech. This is somewhat popular in electronic music.
Paul Lansky made the well-known computer music piece notjustmoreidlechatter using linear predictive coding.
A 10th-order LPC was used in the popular 1980s Speak & Spell educational toy.
LPC predictors are used in Shorten, MPEG-4 ALS, FLAC, SILK audio codec, and other lossless audio codecs.
LPC has received some attention as a tool for use in the tonal analysis of violins and other stringed musical instruments.




See also


Akaike information criterion
Audio compression
Code-excited linear prediction (CELP)
FS-1015
FS-1016
Generalized filtering
Linear prediction
Linear predictive analysis
Pitch estimation
Warped linear predictive coding




References






Further reading


O'Shaughnessy, D. (1988). "Linear predictive coding". IEEE Potentials. 7 (1): 29–32. doi:10.1109/45.1890. S2CID 12786562.
Bundy, Alan; Wallen, Lincoln (1984). "Linear Predictive Coding". Catalogue of Artificial Intelligence Tools. Symbolic Computation. p. 61. doi:10.1007/978-3-642-96868-6_123. ISBN 978-3-540-13938-6.
El-Jaroudi, Amro (2003). "Linear Predictive Coding". Wiley Encyclopedia of Telecommunications. doi:10.1002/0471219282.eot155. ISBN 978-0471219286.




External links


real-time LPC analysis/synthesis learning software
30 years later Dr Richard Wiggins Talks Speak & Spell development
Robert M. Gray, IEEE Signal Processing Society, Distinguished Lecturer Program

Kata Kunci Pencarian:

• Daftar algoritme
• Modulasi kode pulsa
• WhatsApp
• Linear predictive coding
• Warped linear predictive coding
• Code-excited linear prediction
• Speech coding
• Adaptive predictive coding
• Harmonic Vector Excitation Coding
• Audio coding format
• Linear predictive analysis
• Algebraic code-excited linear prediction
• Linear prediction