- Source: List of EIA standards
This is a list of American Electronic Industries Alliance (EIA) Standards.
The EIA ceased operations on February 11, 2011, but the former sectors continue to serve the constituencies of EIA. EIA designated ECA to continue to develop standards for interconnect, passive and electro-mechanical (IP&E) electronic components under the ANSI-designation of EIA standards. All other electronic components standards are managed by their respective sectors. ECA is expected to merge with the National Electronic Distributors Association (NEDA) to form the Electronic Components Industry Association (ECIA). However, the EIA standards brand will continue for IP&E standards within ECIA. As currently authorized, any ANSI standard designated at ANSI EIA-xxx is developed and/or managed by ECA (and, in the future, ECIA).
1–199
TIA/EIA-41 Cellular Radiocommunications Intersystem Operations.
EIA/TIA/IS-55 Recommended Minimum Performance Standards of 800 MHz Dual Mode Mobile Stations
EIA/TIA/IS-66 Sectional Specification for Nonpressurized Fiber Optic Splice Closures
EIA-96
TIA/EIA-136-310-A-1 TDMA Third Generation Wireless - Radio Link Protocol –1
JEP-143C Solid-State Reliability Assessment and Qualification Methodologies
EIA-170/RS-170 Electrical Performance Standards-Monochrome Television Studio Facilities 01 November 1957.
Note: EIA-170 only appears on the cover page of the document, internal pages are labeled RS-170 in the upper right corner.
EIA-170/RS-170 applies only to monochrome (black & white) video.
The later color video version is RS-170A which shows color burst and the 4 color field sequence of NTSC.
The RS-170A version is only a tentative standard, and was never formally adopted. NAB Engineering Handbook Seventh Edition.
EIA-189A Formerly RS-189A. Encoded color bar signal (preceded SMPTE color bars).
EIA-198
EIA RS-198-A?
EIA RS-198-B:1971
EIA-198-C:1983
EIA-198-D:1991 Ceramic dielectric capacitors classes I, II, III
EIA-198-1-E:1998
EIA-198-2-E:1998
EIA-198-3-E:1998
EIA-198-1-F:2002
EIA-198-2-F:2002
EIA-198-3-F:2002
EIA-198-3-4-F:2009
200–299
EIA-222 Standards for antenna mast structural integrity
RS-225, 50Ω RF high power RF connectors, (EIA RF Connectors)
RS-232 (or EIA-232) electrical characteristics, single-ended voltage digital interface circuit (serial data communications)
RS-259, 75Ω RF high power RF connectors, (EIA RF Connectors)
EIA-274 is the most common NC code format. In the machine tool industry it also known as G-code. In the PCB industry Standard Gerber, now revoked, was based on it.
RS-279 electronic color code originally known as the RETMA color code
300–399
EIA/ECA-310 Cabinets, Racks, Panels, and Associated Equipment, maintained by the ECIA (includes 19-inch racks, rack units)
EIA/TIA-329-B Minimum Standards for Communication Antennas Part I - Base Station Antennas
EIA/TIA-329-B-1 Minimum Standards for Communication Antennas Part II - Vehicular Antennas
EIA-343 Formerly RS-343. Signal standard for non-broadcast high resolution monochrome video.
EIA-343A Formerly RS-343 A. Video signal standard for high resolution monochrome CCTV. Based on EIA-343.
EIA-364-38 TP-38D Cable Pull-Out Test Procedure for Electrical Connectors
EIA-370-B Designation System for Semiconductor Devices.
400–499
RS-422 (or EIA-422 or TIA-422), electrical characteristics of the balanced voltage digital interface circuit (serial data communications)
RS-423, a standard for serial communications
RS-449 for serial data communications
EIA/TIA-455-A Standard Test Procedure for Fiber Optic Fibers, Cables, Transducers, Sensors, Connecting and Terminating Devices, and Other Fiber Optic Components
EIA/TIA-455-12A FOTP-12 Fluid Immersion Test for Fiber Optic Components
EIA/TIA-455-37A FOTP-37 Low or High Temperature Bend Test for Fiber Optic Cable
EIA/TIA-455-48B FOTP-48 Measurement of Optical Fiber Cladding Diameter Using Laser-Based Instruments
EIA/TIA-455-87B FOTP-87 Fiber Optic Cable Knot Test
EIA/TIA-455-188 FOTP-188 Low Temperature Testing of Fiber Optic Components
EIA-476 Date Code Marking
EIA-RS-481 Taping/Leadless Components for Automatic Placement
RS-485 Electrical Characteristics of Generators and Receivers for Use in Balanced Digital Multipoint Systems (serial data communications)
RS-494 A 1983 Binary Cutter Location (BCL) standard for CNC
500–599
EIA-535 Fixed Tantalum Capacitors
TIA-568 cable wiring standard for structured cabling (Commercial Building Telecommunications Cabling Standard)
EIA/TIA-569 Commercial Building Standard for Telecommunications Pathways and Spaces
EIA/TIA-570 Residential and Light Commercial Telecommunications Wiring Standard
TIA-574 standardizes the 9-pin D-subminiature connector pinout for use with EIA-232 electrical signalling
600–699
EIA-608 standard for closed captioning for NTSC TV broadcasts in the United States and Canada
TIA/EIA-634-B MC-BS Interface for Public Wireless Communications Systems
EIA/TIA-662 standard for Personal Wireless Telecommunications (PWT).
TIA/EIA-667 Personal Access Communications System Wireless User Premises Equipment (PACS-WUPE) Air Interface Standard
700–799
TIA/EIA/IS-707-A Data Service Options for Wideband Spread Spectrum Systems
EIA-708 is the standard for closed captioning for ATSC digital television streams in the United States and Canada.
CEA-709.1-B Control Network Protocol Specification
800–899
EIA/CEA-861 A DTV Profile for Uncompressed High Speed Digital Interfaces (now CTA-861)
TIA/EIA/IS-880 TIA-41-D Based Network Enhancements for CDMA Packet Data Service (C-PDS) Phase 1
900–999
TIA-968-A Technical Requirements for Connection of Terminal Equipment to the Telephone Network
1000–1099
TIA-1096-A Connector Requirements for Connection of Terminal Equipment to the Telephone Network
2000–2099
TIA/EIA/IS-2000.5-A Upper Layer (Layer 3) Signaling Standard for cdma2000 Spread Spectrum Systems
TIA/EIA/IS-2000.5-C Upper Layer (Layer 3) Signaling Standard for cdma2000 Spread Spectrum Systems
3100–3199
EIA SP 3128 POLARIZING/CODING KEY OVERSTRESS TEST PROCEDURE FOR ELECTRICAL CONNECTORS
Notes
The above list of standards is not only incomplete, but also out of date. For example, the standard on capacitor dielectric classes is as of Nov 2002: EIA-198-1-F Ceramic Dielectric Capacitors: Classes I, II, III, and IV
RS is for "Recommended Standard", an early prefix used for electronic standards
See also
SCART
ANSI
EIA Recommended Standard
References
External links
EIA Standards Store, IHS is the official distributor of EIA standards
Search for EIA Standards, ECIA provides a searchable database of EIA standards and projects.
TIA
ECA
JEDEC
CEA
GEIA (TechAmerica)
Kata Kunci Pencarian:
- Temperatur dan tekanan standar
- Banjir minyak 1980-an
- Campuran bahan bakar etanol umum
- Kendaraan bahan bakar fleksibel
- List of EIA standards
- RS-232
- EIA-608
- RS-422
- RS-485
- JEDEC
- E series of preferred numbers
- RS-423
- Harald Eia
- Low-voltage differential signaling