list of referred indian standard codes for civil engineers

Source: List of referred Indian Standard Codes for civil engineers

A large number of Indian Standard (IS) codes are available that are meant for virtually every aspect of civil engineering one can think of. During one's professional life one normally uses only a handful of them depending on the nature of work they are involved in. Civil engineers engaged in construction activities of large projects usually have to refer to a good number of IS codes as such projects entail use a variety of construction materials in many varieties of structures such as buildings, roads, steel structures, all sorts of foundations and what not.
A list of these codes can come in handy not only for them but also for construction-newbies, students, etc. The list provided below may not be a comprehensive one, yet it definitely includes some IS codes quite frequently used (while a few of them occasionally) by construction engineers. The description of the codes in the list may not be exactly the same as that written on the covers of the codes. Readers may add more such codes to this list and also point out slips if found in the given list.
Indian standard codes are list of codes used for civil engineers in India for the purpose of design and analysis of civil engineering structures such as buildings, dams, roads, railways, and airports.

IS: 456 – code of practice for plain and reinforced concrete.
IS: 383 – specifications for fine and coarse aggregate from natural sources for concrete.
IS: 2386 – methods of tests for aggregate for concrete. (nine parts)
IS: 2430 – methods of sampling.
IS: 4082 – specifications for storage of materials.
IS: 2116 – permissible clay, silt and fine dust contents in sand.
IS: 2250 – compressive strength test for cement mortar cubes.
IS: 269-2015 – specifications for 33, 43 and 53 grade OPC.
IS: 455 – specifications for PSC (Portland slag cement).
IS: 1489 – specifications for PPC (Portland pozzolana cement).
IS: 6909 – specifications for SSC (super-sulphated cement).
IS: 8041 – specifications for RHPC (Rapid Hardening Portland cement)
IS: 12330 – specifications for SRPC (sulphate resistant Portland cement).
IS: 6452 – specifications for HAC for structural use (high alumina cement).
S: 3466 – specifications for masonry cement.
IS: 4031 – chemical analysis and tests on cement.
IS: 456; 10262; SP 23 – codes for designing concrete mixes.
IS: 1199 – methods of sampling and analysis of concrete.
IS: 516BXB JWJJS– methods of test for strength of concrete.
IS: 13311 – ultrasonic testing of concrete structures.
IS: 4925 – specifications for concrete batching plant.
IS: 3025 – tests on water samples
IS: 4990 – specifications for plywood formwork for concrete.
IS: 9103 – specifications for concrete admixtures.
IS: 12200 – specifications for PVC (Polyvinyl Chloride) water bars.
IS: 1077 – specifications for bricks for masonry work.
IS: 5454 – methods of sampling of bricks for tests.
IS: 3495 – methods of testing of bricks.
IS: 1786 – cold-worked HYSD steel rebars (grades Fe415 and Fe500).
IS: 432; 226; 2062 – mild steel of grade I.
IS: 432; 1877 – mild steel of grade II.
IS: 1566 – specifications for hard drawn steel wire fabric for reinforcing concrete.
IS: 1785 – specifications for plain hard drawn steel wire fabric for prestressed concrete.
IS: 2090 – specifications for high tensile strength steel bar for prestressed concrete.
IS: 2062 – specifications for steel for general purposes.
IS: 226 – specifications for rolled steel made from structural steel.
IS: 2074 – specifications for prime coat for structural steel.
IS: 2932 – specifications for synthetic enamel paint for structural steel.
IS: 12118 – specifications for Polysulphide sealants

LIST OF INDIAN STANDARDS

Standard

standard

Standard

List

LIST OF INDIAN STANDARDS

Soil Properties and its Testing

References

Kata Kunci Pencarian:

LIST OF INDIAN STANDARDS

Soil Properties and its Testing

References

Kata Kunci Pencarian:

TAG FAVORIT

GENRE