- Source: Lucid (programming language)
Lucid is a dataflow programming language designed to experiment with non-von Neumann programming models. It was designed by Bill Wadge and Ed Ashcroft and described in the 1985 book Lucid, the Dataflow Programming Language.
pLucid was the first interpreter for Lucid.
Model
Lucid uses a demand-driven model for data computation. Each statement can be understood as an equation defining a network of processors and communication lines between them through which data flows. Each variable is an infinite stream of values and every function is a filter or a transformer. Iteration is simulated by 'current' values and 'fby' (read as 'followed by') operator allowing composition of streams.
Lucid is based on an algebra of histories, a history being an infinite sequence of data items. Operationally, a history can be thought of as a record of the changing values of a variable, history operations such as first and next can be understood in ways suggested by their names. Lucid was originally conceived as a disciplined, mathematically pure, single-assignment language, in which verification would be simplified. However, the dataflow interpretation has been an important influence on the direction in which Lucid has evolved.[1]
Details
In Lucid (and other dataflow languages) an expression that contains a variable that has not yet been bound waits until the variable has been bound, before proceeding. An expression like x + y will wait until both x and y are bound before returning with the output of the expression. An important consequence of this is that explicit logic for updating related values is avoided, which results in substantial code reduction, compared to mainstream languages.
Each variable in Lucid is a stream of values. An expression n = 1 fby n + 1 defines a stream
using the operator 'fby' (a mnemonic for "followed by"). fby defines what comes after the previous
expression. (In this instance the stream produces 1,2,3,...).
The values in a stream can be addressed by these operators (assuming x is the variable being used):
'first x' - fetches the first value in the stream x,
'x' - the current value of the stream,
'next x' - fetches the next value in the stream.
'asa' - an operator that does some thing 'as soon as' the condition given becomes true.
'x upon p' - upon is an operator that repeats the old value of the stream x, and updates to the new values only when the stream p makes a true value available. (It serves to slow down the stream x)
i.e.: x upon p is the stream x with new values appearing upon the truth of p.
The computation is carried out by defining filters or transformation functions that act on these time-varying streams of data.
Examples
= Factorial
=fac
where
n = 0 fby (n + 1);
fac = 1 fby ( fac * (n + 1) );
end
= Fibonacci sequence
=fib
where
fib = 0 fby ( 1 fby fib + next fib );
end
= Total of a Sequence
=total
where
total = 0 fby total + x
end;
= Running Average
=running_avg
where
sum = first(input) fby sum + next(input);
n = 1 fby n + 1;
running_avg = sum / n;
end;
= Prime numbers
=prime
where
prime = 2 fby (n whenever isprime(n));
n = 3 fby n+1;
isprime(n) = not(divs) asa divs or prime*prime > N
where
N is current n;
divs = N mod prime eq 0;
end;
end
Dataflow diagram
= Quick sort
=qsort(a) = if eof(first a) then a else follow(qsort(b0),qsort(b1)) fi
where
p = first a < a;
b0 = a whenever p;
b1 = a whenever not p;
follow(x,y) = if xdone then y upon xdone else x fi
where
xdone = iseod x fby xdone or iseod x;
end
end
Data flow diagram
--------> whenever -----> qsort ---------
| ^ |
| | |
| not |
| ^ |
|---> first | |
| | | |
| V | |
|---> less --- |
| | |
| V V
---+--------> whenever -----> qsort -----> conc -------> ifthenelse ----->
| ^ ^
| | |
--------> next ----> first ------> iseod -------------- |
| |
-----------------------------------------------------------
= Root mean square
=sqroot(avg(square(a)))
where
square(x) = x*x;
avg(y) = mean
where
n = 1 fby n+1;
mean = first y fby mean + d;
d = (next y - mean)/(n+1);
end;
sqroot(z) = approx asa err < 0.0001
where
Z is current z;
approx = Z/2 fby (approx + Z/approx)/2;
err = abs(square(approx)-Z);
end;
end
= Hamming problem
=h
where
h = 1 fby merge(merge(2 * h, 3 * h), 5 * h);
merge(x,y) = if xx <= yy then xx else yy fi
where
xx = x upon xx <= yy;
yy = y upon yy <= xx;
end;
end;
Dataflow Diagram
References
External links
pLucid
Kata Kunci Pencarian:
- Daftar bahasa pemrograman
- Lucid (programming language)
- Lucid
- ISWIM
- List of programming languages
- Logo (programming language)
- List of programming languages by type
- Dataflow
- Dataflow programming
- Lisp (programming language)
- COWSEL
- 1
- 2
A Silent Voice: The Movie (2016)
Godzilla vs. Kong (2021)
Rogue One: A Star Wars Story (2016)
The Last Samurai (2003)
The Passion of the Christ (2004)
Indiana Jones and the Last Crusade (1989)
Kingdom of the Planet of the Apes (2024)
No More Posts Available.
No more pages to load.