• Source: Maine State Route 24

      • 24.3/info/state" target="_blank">State 24.3/info/route" target="_blank">Route 24 (abbreviated SR 24) is part of 24.3/info/maine" target="_blank">Maine's system of numbered 24.3/info/state" target="_blank">state highways, running from Bailey Island south of Orr's Island in Harpswell northward to Gardiner, passing through Brunswick along the way.


      24.3/info/route" target="_blank">Route description


      SR 24 begins at an intersection with Abner Point Road on Bailey Island in the town of Harpswell. It formerly began at the southern tip of the island, where the road dead-ends. It proceeds northward through the "downtown" area of Harpswell on Orr's Island and continues onto mainland 24.3/info/maine" target="_blank">Maine where it crosses into the town of Brunswick.
      SR 24 used to traverse downtown Brunswick, but now bypasses the downtown area. The 24.3/info/route" target="_blank">route continues north until reaching the southern terminus of its business 24.3/info/route" target="_blank">route, then interchanges with a freeway portion of US 1, which it then joins until it reaches SR 196. SR 24 exits US 1 to join 24.3/info/route" target="_blank">Route 196 and both routes cross the Androscoggin River into Topsham. SR 24 splits off from 24.3/info/route" target="_blank">Route 196 immediately after crossing the river and rejoins its former alignment.
      SR 24 enters the town of Bowdoinham where it meets the northern terminus of SR 125 and turns northeast. SR 24 enters Richmond and briefly overlaps with SR 197 before continuing into Gardiner, paralleling the river at this point. SR 24 comes to an end in the heart of Gardiner at the intersection of 24.3/info/maine" target="_blank">Maine Avenue and Bridge Street (US 201, SR 9, SR 27, and SR 126).


      History


      SR 24 between its southern terminus and the Androscoggin River crossing was formerly designated SR 124. It was renumbered to 24 in the early 1930s when the number 124 was reassigned to a completely new 24.3/info/route" target="_blank">route. From Topsham, SR 24 was designated over a new routing to its current northern terminus in Gardiner and ultimately as far as Guilford.
      From Gardiner, SR 24 used to run concurrently with US 201 and SR 27 to Sidney, a designation which was simply dropped following SR 24's truncation in 1954. The remainder of the 24.3/info/route" target="_blank">route, which runs from Sidney to Guilford, was renumbered SR 23. This 1954 routing remains to the present.


      = Brunswick bypass and new business 24.3/info/route" target="_blank">route

      =
      In 2014, SR 24 was removed from its existing alignment in downtown Brunswick and Topsham and routed along the US 1 freeway and the southernmost 1⁄2 mile (0.80 km) of SR 196 to bypass downtown. This re-routing reduced the overall length of SR 24 by approximately one mile (1.6 km) and eliminated its concurrency with US 201. Its existing alignment was redesignated SR 24 Business.
      SR 24 departs its old alignment at the intersection of Gurnet and Bath Roads. Instead of turning left onto Bath Road, it now continues straight onto the US 1 bypass. It runs concurrently with US 1, then exits onto SR 196 northbound. SR 24 departs SR 196 at Bypass Road and rejoins its existing alignment at Elm Street in Topsham.


      Major intersections




      Bannered business 24.3/info/route" target="_blank">route



      24.3/info/state" target="_blank">State 24.3/info/route" target="_blank">Route 24 Business was designated in 2014 along the former alignment of SR 24 through downtown Brunswick and into Topsham, after the parent 24.3/info/route" target="_blank">route was realigned to bypass downtown via US 1 and SR 196.


      References

    Kata Kunci Pencarian: