- Source: Nut driver
A nutdriver or nut driver is a hand tool for tightening or loosening nuts and bolts. It essentially consists of a socket attached to a shaft and cylindrical handle and is similar in appearance and use to a screwdriver. They generally have a hollow shaft to accommodate a shank onto which a nut is threaded. They are typically used for lower torque applications than wrenches or ratchets and are frequently used in the appliance repair and electronics industries.
Variations include T-shaped handles for providing the operator with a better grip, ratcheting handles, sockets with recessed magnets for holding fasteners, and flex shafts for bending around obstructions.
Indexable bits with the same purpose, to be held either in indexable handles or in power tool chucks, are called nutsetters.
A spinner handle is a shaft and handle with a drive fitting—most commonly 1⁄4 in (6.35 mm) square axle at the end for attaching interchangeable sockets. This allows one to use a single handle with a number of sizes instead of having a separate nut driver for each size. However, a spinner lacks the benefit of a hollow shaft; thus, a common alternative system is a single handle with interchangeable shafts in each size.
See also
Socket wrench
Can wrench
References
External links
Media related to Nut drivers at Wikimedia Commons
Kata Kunci Pencarian:
- George Russell (pembalap)
- Filmografi Jackie Chan
- Michael Schumacher
- MPlayer
- Bones (studio)
- Festival Film Bandung
- NASCAR Seri Xfinity
- AFI's 100 Years...100 Movies
- Fred Tatasciore
- Daftar lagu rock instrumental
- Nut driver
- Areca nut
- Murder of Alianna DeFreeze
- Persian drill
- Xcelite
- Honey Nut Cheerios
- Twist-on wire connector
- Network UPS Tools
- Socket wrench
- Computer case screws
