- Source: Oil pressure
- Kontrol mesin pesawat
- Tegangan permukaan
- Kelapa sawit
- Kenanga
- MasterChef Indonesia (musim 11)
- MasterChef Indonesia (musim 9)
- Turbin gas
- Grand Prix F1 Belgia 1991
- Indianapolis 500 1966
- Grand Prix F1 Italia 1993
- Oil pressure
- Oil pump (internal combustion engine)
- Pressure measurement
- Tell-tale (automotive)
- Blowout (well drilling)
- Oil filter
- List of auto parts
- Motor oil
- Pressure switch
- Petroleum reservoir
No More Posts Available.
No more pages to load.
Oil pressure is an important factor in the longevity of most internal combustion engines. With a forced lubrication system (invented by Frederick Lanchester), oil is picked up by a positive displacement oil pump and forced through oil galleries (passageways) into bearings, such as the main bearings, big end bearings and camshaft bearings or balance shaft bearings. Other components such as cam lobes and cylinder walls are lubricated by oil jets.
Sufficient oil pressure ensures that the metal of the rotating shaft (journal) and the bearing shell can never touch, and wear is therefore confined to initial start-up and shutdown. The oil pressure, combined with the rotation of the shaft, also hydrodynamically centers the journal in its shell and cools the bearings. Such a bearing is known as a fluid bearing.
Oil pressure is higher when the engine is cold due to the increased viscosity of the oil, and also increases with engine speed until the relief valve in the oil pump opens to divert excess flow. Oil pressure is lowest under hot idling conditions, and the minimum pressure allowed by the manufacturer's tolerances is usually given at this point. Excessive oil pressure may indicate a blocked filter, blocked oil gallery or the wrong grade of oil. Low oil pressure indicates worn bearings or a broken oil pump.
Some vehicle engines have an oil pressure switch that switches a warning light on at low oil pressure. Some vehicles have an oil pressure gauge in the dashboard or instrument cluster.
Oil pressure is created by a fluid flow restriction in the outlet line of the pump, not by the pump itself. Examples of such restrictions include big end and main bearings, as well as camshaft and rocker gear if fitted.
See also
Splash lubrication, a rudimentary "non-pressurized" form of lubrication found in early engines
References
External links
Troubleshooting Low Oil Pressure from AA1Car