• Source: Racket features

Racket has been under active development as a vehicle for programming language research since the mid-1990s, and has accumulated many features over the years. This article describes and demonstrates some of these features. Note that one of Racket's main design goals is to accommodate creating new programming languages, both domain-specific languages and completely new languages.
Therefore, some of the following examples are in different languages, but they are all implemented in Racket. Please refer to the main article for more information.
The core Racket implementation is highly flexible. Even without using dialects, it can function as a full-featured scripting language, capable of running both with and without windows-native graphical user interface (GUI), and capable of tasks from web server creation to graphics.




Runtime support






= Garbage collection, tail calls, space safety

=
Racket can use three different garbage collectors:

Originally, the conservative Boehm garbage collector was used. However, conservative collection is impractical for long-running processes such as a web server—such processes tend to slowly leak memory. Also, there are pathological cases where a conservative collector leaks memory fast enough to make certain programs impossible to run. For example, when traversing an infinite list, a single conservative mistake of retaining a pointer leads to keeping the complete list in memory, quickly overflowing available memory. This collector is often referred to as "CGC" in the Racket community.
SenoraGC is an alternative conservative garbage collector that is intended mainly for debugging and memory tracing.
The moving memory manager (aka "3m") is a precise garbage collector, and it has been Racket's default collector since 2007. This collector is a generational one, and it supports memory accounting via custodians (see below). The collector is implemented as a C source transformer that is itself written in Racket. Therefore, the build process uses the conservative collector for bootstrapping.
Like all implementations in the Scheme family, Racket implements full tail call elimination. Racket takes this further: the language is made fully safe-for-space, via live variable analysis. This complements the precise garbage collector and in some cases, like in the implementation of Lazy Racket, the two features are crucial for proper execution. This is in addition to further compiler optimizations such as lambda lifting and just-in-time compilation.




= System interface and scripting

=
Racket's system interface includes asynchronous non-blocking I/O, green threads, synchronization channels, semaphores, sub-processes, and Transmission Control Protocol (TCP) sockets.
The following program starts an "echo server" on port 12345.

The combination of dynamic compilation and a rich system interface makes Racket a capable scripting language, similar to Perl or Python.
The following example demonstrates walking a directory tree, starting at the current directory. It uses the in-directory function to construct a sequence that walks the tree. The for form binds path to each path in the sequence, and regexp-match? tests these paths against the given regexp pattern.

The next example uses a hash table to record previously seen lines and print only unique ones.

Both of these programs can be run in DrRacket, or on the command line, via the racket executable. Racket ignores an initial shebang line, making it possible to turn such programs to executable scripts. The following script demonstrates this, in addition to using Racket's library for command-line argument parsing:

The script is a grep-like utility, expecting three command-line arguments: a base directory, a filename extension, and a (perl-compatible) regular expression. It scans the base directory for files with the given suffix, and print lines matching the regexp pattern.




= Resource management and sandboxing

=
Racket features the concept of a "custodian": a kind of value that acts as a resource manager. This is often used in network servers, where each connection is dealt with in a new custodian, making it easy to "clean-up" all resources that might have been left open by the handler (e.g., open ports). The following extends the "echo server" example with such a custodian use:

Custodians, combined with the memory accounting feature of the 3m garbage collector, and several added runtime parameters that control more aspects of the runtime, make it possible to create fully safe sandboxed execution contexts. The racket/sandbox library provides this kind of functionality in a simple way. The following example creates a read–eval–print loop (REPL) server on the specified port; connecting to this port will look like a plain Racket REPL, except that the evaluation is subject to the various protection aspects of the sandbox. For example, it is not possible to access the file system from this REPL, create network connection, run subprocesses, or use too much time or memory. (In fact, this REPL is safe enough to be given out publicly.)




Web and network programming


The next example implements a web server using the web-server/insta language. Each time a connection is made to the server, the start function is called to get the HTML to send back to the client.

Racket also includes the functions needed to write scrapers and robots. As an example, the following function lists the Google results for a search string.

The library also includes support for protocols other than http:




Graphics


Graphic capabilities come in several different flavors that are intended for different audiences. The 2htdp/image library provides convenient functions for constructing images. This library is mainly used by students in How to Design Programs (HtDP) based courses. In the following example, a sierpinski function is defined and called (at the same time) to generate a Sierpinski triangle of depth 8.

DrRacket editors can contain images, and DrRacket displays image values just like any other type of value (such as integers or lists). Running the above program, for example, actually displays a Sierpinski triangle, which can be cut and pasted into another program.
The plot library constructs image values for more mature audiences and needs. For example, the following program plots the sum of two




R

×

R

×

R

→

R



{\displaystyle \mathbb {R} \times \mathbb {R} \times \mathbb {R} \rightarrow \mathbb {R} }

(three-dimensional) Gaussians, as concentric, partially transparent surfaces:

Here, the isosurfaces3d function requires a three-argument function for its first argument, which the curried f3+ supplies. Besides constructing image values, plot can also write files in Portable Network Graphics (PNG), Portable Document Format (PDF), PostScript and Scalable Vector Graphics (SVG) formats.




= GUI programming

=
Racket implements a portable GUI layer which the libraries mentioned above build on. It is implemented via the native Windows application programming interface (API), via Cocoa on macOS, and via GTK+ on Linux and others. The Racket API is a class-based toolkit, somewhat related to wxWidgets which was used originally.
The following simple guessing game demonstrates coding with the GUI toolkit. The frame% class implements a top-level window, and button% implements a button. The check function defined here produces a function that is used for the button's callback action.

The GUI can be hand-coded in this way or with the help of a GUI designer program available on PLaneT.




= Slideshow

=
Slide-based presentations can also be developed in Racket using the slideshow language, much like Beamer, but with Racket's programming facilities. Elements of the slides are pictures that can be combined.
For example, the following program displays in full-screen a title slide, followed by a slide with some pictures. The vc-append and hc-append functions combine pictures vertically and horizontally, respectively, and centered on the other axis.

Extension packages also exist on PLaneT, for example to include LaTeX elements.




Foreign function interface


Racket features a foreign function interface that is based on libffi. The interface allows writing unsafe low-level C-like code, that can allocate memory, dereference pointers, call out to functions in shared libraries, and send out callbacks to Racket functions (using libffi closures). The core implementation is a thin layer atop libffi (written in C), and the full interface is then implemented via Racket code. The interface uses macros extensively, resulting in an expressive Racket-based interface description language. This language has a number of useful features, such as uniform representation for higher-order functions (avoiding the pitfalls when callbacks and callouts are different), struct definitions that are similar to plain Racket structs, and custom function types that can represent input and output pointers, implicit arguments (e.g., an argument that provides the number of elements in a vector that is passed as another argument). By using this interface to access underlying GUI toolkits, Racket implements its own GUI layer, in Racket.
The FFI can be used in a number of different ways: from writing a complete glue layer for a library (as done for Racket's OpenGL binding), to quickly pulling out a single foreign function. An example of the latter approach:




Language extensions


Racket's most notable feature is its ability to build new domain-specific and general-purpose languages. This is the result of combining a number of important features:

a flexible module system that is used for linking code and for namespace management,
an extensive macro system—functioning as a compiler-API—that can create new syntactic forms,
a rich runtime system, providing features that language implementors can use, like (composable, delimited) continuations, resource management, etc.,
a way to specify (and implement) parsers for new language syntaxes.
The module system plays an important role in combining these features, and making it possible to write code that spans across a number of modules, where each can be written in a different language.
Such languages are used extensively in the Racket distribution and in user libraries. In fact, creating a new language is so straightforward, that there are some languages that have less than a handful of uses.
Racket comes with a number of useful languages, some are very different from Racket's default language.




= Scribble

=
Scribble, Racket's documentation system, comes in the form of a number of languages that are used to write prose. It is used for Racket's documentation, as well as writing books and articles. Actually, rather than a single "scribble" language, it is a family of (very similar) dialects, each for a different purpose.
To run the following example, copy it into DrRacket and click one of the two scribble rendering buttons that will appear (PDF rendering requires pdfTeX). Alternatively, use the scribble executable on the file.

The most striking feature of the Scribble languages is their use of a new syntax, which is designed specifically for textually rich code. The syntax allows free-form text, string interpolation, customizable quotations, and is useful in other applications such as preprocessing text, generating text, and HTML template systems. Note that the syntax extends plain S-expressions, and is implemented as an alternative input for such expressions.




= Typed Racket

=
Typed Racket is a statically typed variant of Racket. The type system that it implements is unique in that the motivation in developing it was accommodating as much idiomatic Racket code as possible—as a result, it includes subtypes, unions, and much more. Another goal of Typed Racket is to allow migration of parts of a program into the typed language, so it accommodates calling typed code from untyped code and vice versa, generating dynamic contracts to enforce type invariants. This is considered a desirable feature of an application's lifetime stages, as it matures from "a script" to "an application", where static typing helps in maintenance of a large body of code.




= Lazy Racket

=
The lazy language is a language with lazy evaluation semantics, similar to Haskell. In the following example, fibs is an infinite list which 1000th element will not be computed until its value is needed for the printout.




= Logic programming

=
Racket comes with three logic programming languages: Racklog, a Prolog-like language; a Datalog implementation; and a miniKanren port. Unlike the Scribble syntax, the first two of these languages use an all-new syntax rather than an extension of S-expressions. If used it in DrRacket, it provides proper highlighting, the usual host of tools check syntax, and a Prolog/Datalog REPL.




= Education tools

=
The PLT group which develops Racket has traditionally been involved in education at all levels. One of the earliest research ideas that the group promoted is the use of language levels, which restrict new students while providing them with helpful error messages that fit the student's level of knowledge. This approach is heavily used in How to Design Programs (HtDP), the textbook that several PLT developers have authored, and in the ProgramByDesign project. The following program uses the htdp/bsl—the "beginning student language". It uses the 2htdp/image library for creating pictures in the teaching languages, and the 2htdp/universe library for interactive animations.




= ALGOL

=
Racket comes with a full implementation of the ALGOL 60 language.




= Plai and plai-typed

=

Another supported language is plai which like racket can be typed or untyped. "Modules written in plai export every definition (unlike scheme)." "The Typed PLAI language differs from traditional Racket most importantly by being statically typed. It also gives some useful new constructs: define-type, type-case, and test."




= Creating languages

=
Finally, the following example is an implementation of a new language:

This language:

provides everything from the racket language, so it is a somewhat similar variant,
except for two special "hook macros" that implement unbound variable lookup and function calls, instead of these, new forms are provided to
implicitly quote all unknown variables
allow hash tables to be used as functions, where the arguments are used for hash-table lookup.
If this code is stored in a mylang.rkt file, it can be used as follows:




References



As of this edit, this article uses content from "Racket", which is licensed in a way that permits reuse under the Creative Commons Attribution-ShareAlike 3.0 Unported License, but not under the GFDL. All relevant terms must be followed.




External links


Official website
docs.racket

Kata Kunci Pencarian:

• Academy Award untuk Film Terbaik
• Kompleks militer–industri
• Jungle Jim (film)
• Daftar film hilang
• Racket features
• Racket (programming language)
• What a Racket!
• Arc (programming language)
• COWSEL
• Logo (programming language)
• Lisp (programming language)
• Call-with-current-continuation
• Paul Graham (programmer)
• StarLogo