- Source: Resonance escape probability
In nuclear physics, resonance escape probability
p
{\displaystyle p}
is the probability that a neutron will slow down from fission energy to thermal energies without being captured by a nuclear resonance. A resonance absorption of a neutron in a nucleus does not produce nuclear fission. The probability of resonance absorption is called the resonance factor
ψ
{\displaystyle \psi }
, and the sum of the two factors is
p
+
ψ
=
1
{\displaystyle p+\psi =1}
.
Generally, the higher the neutron energy, the lower the probability of absorption, but for some energies, called resonance energies, the resonance factor is very high. These energies depend on the properties of heavy nuclei. Resonance escape probability is highly determined by the heterogeneous geometry of a reactor, because fast neutrons resulting from fission can leave the fuel and slow to thermal energies in a moderator, skipping over resonance energies before reentering the fuel.
Resonance escape probability appears in the four factor formula and the six factor formula. To compute it, neutron transport theory is used.
Resonant neutron absorption
The nucleus can capture a neutron only if the kinetic energy of the neutron is close to the energy of one of the energy levels of the new nucleus formed as a result of capture. The capture cross section of such a neutron by the nucleus increases sharply. The energy at which the neutron-nucleus interaction cross section reaches a maximum is called the resonance energy. The resonance energy range is divided into two parts, the region of resolved and unresolved resonances. The first region occupies the energy interval from 1 eV to Egr. In this region, the energy resolution of the instruments is sufficient to distinguish any resonance peak. Starting from the energy Egr, the distance between resonance peaks becomes smaller than the energy resolution. Subsequently, the resonance peaks are not separated. For heavy elements, the boundary energy Egr≈1 keV.
In thermal neutron reactors, the main resonant neutron absorber is Uranium-238. In the table for 238U, several resonance neutron energies Er, the maximum absorption cross sections σa, r in the peak, and the width G of these resonances are given.
Effective resonance integral
Let us assume that the resonant neutrons move in an infinite system consisting of a moderator and 238U. When colliding with the moderator nuclei, the neutrons are scattered, and with the 238U nuclei, they are absorbed. The former collisions favor the retention and removal of resonant neutrons from the danger zone, while the latter lead to their loss.
The probability of avoiding resonance capture (coefficient φ) is related to the density of nuclei NS and the moderating power of the medium ξΣS by the relationship below,
φ
=
e
−
N
S
ξ
Σ
S
J
e
f
f
.
{\displaystyle \varphi =e^{-{\frac {N_{S}}{\xi \Sigma _{S}}}J_{\mathrm {eff} }}.}
The JeFF value is called the effective resonance integral. It characterizes the absorption of neutrons by a single nucleus in the resonance region and is measured in barnes. The use of the effective resonance integral simplifies quantitative calculations of resonance absorption without detailed consideration of neutron interaction at deceleration. The effective resonance integral is usually determined experimentally. It depends on the concentration of 238U and the mutual arrangement of uranium and the moderator.
= Homogeneous mixtures
=In a homogeneous mixture of moderator and 238U, the effective resonance integral is found with a good accuracy by the empirical formula below,
φ
=
e
−
N
S
ξ
Σ
S
J
e
f
f
.
{\displaystyle \varphi =e^{-{\frac {N_{S}}{\xi \Sigma _{S}}}J_{\mathrm {eff} }}.}
where N3/N8 is the ratio of moderator and 238U nuclei in the homogeneous mixture, σ3S is the microscopic scattering cross section of the moderator. As can be seen from the formula, the effective resonance integral decreases with increasing 238U concentration. The more 238U nuclei in the mixture, the less likely absorption by a single nucleus of the moderating neutrons will take place. The effect of absorption in some 238U nuclei on absorption in others is called resonance level shielding. It increases with increasing concentration of resonance absorbers.
As an example, we can calculate the effective resonance integral in a homogeneous natural uranium-graphite mixture with the ratio N3/N8=215. The scattering cross section of graphite σCS=4.7 barns;
J
e
f
f
=
3
,
9
⋅
(
215
⋅
4
,
7
)
0
,
415
=
69
{\displaystyle J_{\mathrm {eff} }=3,9\cdot (215\cdot 4,7)^{0,415}=69}
барн.
Heterogeneous mixtures
In a homogeneous environment, all 238U nuclei are in the same conditions with respect to the resonant neutron flux. In a heterogeneous environment uranium is separated from the moderator, which significantly affects the resonant neutron absorption. Firstly, some of the resonant neutrons become thermal neutrons in the moderator without colliding with uranium nuclei; secondly, resonant neutrons hitting the surface of the fuel elements are almost all absorbed by the thin surface layer. The inner 238U nuclei are shielded by the surface nuclei and participate less in the resonant neutron absorption, and the shielding increases with the increase of the fuel element diameter d. Therefore, the effective 238U resonance integral in a heterogeneous reactor depends on the fuel element diameter d:
J
e
f
f
=
a
+
b
d
.
{\displaystyle J_{\mathrm {eff} }=a+{\frac {b}{\sqrt {d}}}.}
The constant a characterizes the absorption of resonance neutrons by surface and the constant b - by inner 238U nuclei. For each type of nuclear fuel (natural uranium, uranium dioxide, etc.) the constants a and b are measured experimentally. For natural uranium rods a=4.15, b=12.35.
J
e
f
f
=
4
,
15
+
12
,
35
d
,
{\displaystyle J_{\mathrm {eff} }=4,15+{\frac {12,35}{\sqrt {d}}},}
U for a rod from natural uranium with diameter d=3 cm:
J
e
f
f
=
4
,
15
+
12
,
35
3
≈
11
,
3
{\displaystyle J_{\mathrm {eff} }=4,15+{\frac {12,35}{\sqrt {3}}}\approx 11,3}
barns.
Comparison of the last two examples shows that the separation of
uranium and moderator noticeably decreases neutron absorption in the
resonance region.
Moderator influence
Coefficient φ is dependent on the following;
N
8
J
e
f
f
ξ
Σ
S
=
Σ
ξ
Σ
S
,
{\displaystyle {\frac {N_{8}J_{\mathrm {eff} }}{\xi \Sigma _{S}}}={\frac {\Sigma }{\xi \Sigma _{S}}},}
Which reflects the competition of two processes in the resonance region: absorption of neutrons and their deceleration. The cross section Σ, by definition, is analogous to the macroscopic absorption cross section with replacement of the microscopic cross section by the effective resonance integral JeFF. It also characterizes the loss of slowing neutrons in the resonance region. As the 238U concentration increases, the absorption of resonant neutrons increases and hence fewer neutrons are slowed down to thermal energies. The resonance absorption is influenced by the slowing down of neutrons. Collisions with the moderator nuclei take neutrons out of the resonance region and are more intense the greater the moderating power
ξ
Σ
S
{\displaystyle \xi \Sigma _{S}}
. So, for the same concentration of 238U, the probability of avoiding resonance capture in the uranium-water medium is greater than in the uranium-carbon medium.
Let us calculate the probability of avoiding resonance capture in homogeneous and heterogeneous environments natural uranium-graphite. In both media the ratio of carbon and 238U nuclei NC/NS=215. The diameter of the uranium rod is d=3 cm. Taking into account that ξC=0.159, σCa=4.7 barn, we calculate the following probability;
N
8
ξ
σ
S
C
N
C
=
1
0
,
159
⋅
4
,
7
⋅
215
=
0
,
00625
{\displaystyle {\frac {N_{8}}{\xi \sigma _{S}^{C}N_{C}}}={\frac {1}{0,159\cdot 4,7\cdot 215}}=0,00625}
barn−1.
Calculating the coefficients φ in homogeneous and heterogeneous mixtures, we get;
φhom = e−0,00625·68 = e−0,425 ≈ 0,65,
φhet = e−0,00625·11,3 = e−0,0705 ≈ 0,93.
The transition from homogeneous to heterogeneous medium slightly reduces the thermal neutron absorption in uranium. However, this loss is considerably overlapped by the decrease of the resonance neutron absorption, and the propagation properties of the medium improve.
References
Literature
Dorf, Richard, ed. (2018). The Engineering Handbook (2nd ed.). Boca Raton: CRC. pp. 70–76. ISBN 9781420039870.