• Source: Rial ARC2

The Rial ARC2 was a Formula One racing car manufactured and raced by Rial Racing for the 1989 Formula One season. It was powered by a Cosworth DFR V8 engine. Its best finish was at the 1989 United States Grand Prix when Christian Danner drove it to fourth place.




Development


Rial Racing had run the tidy Rial ARC1, designed by Gustav Brunner, in 1988 and had scored three points with it. For 1989, a new chassis, largely based on the previous year's car and designated the ARC2, was designed by Stefan Fober, with input from Bob Bell and Martin Goodrich. The chassis was configured with double wishbone pullrod suspension, front and rear, with Koni dampers. The wheelbase of the chassis was 2,840 millimetres (112 in) and it had a front track of 1,800 millimetres (71 in). The rear track was less, 1,600 millimetres (63 in).
The ARC2 was powered by the Cosworth DFR 3.5 litre V8 engine. The engine was rated as having 595 bhp with a maximum rpm of 11,000. A Lucas ignition system was used and the car ran on Goodyear tyres. It carried sponsorship from Rial, the parent company of Rial Racing, the tobacco brand Marlboro, and La Cinq. A total of three chassis were built for the 1989 season.




Racing history


Having run a single car for Andrea de Cesaris the previous season, Rial Racing expanded to two entries for 1989. De Cesaris had moved to BMS Scuderia Italia for 1989 and was replaced with the relatively experienced German Christian Danner. Driving the second car was Formula One novice Volker Weidler.
Danner comfortably qualified his ARC2 17th on the grid at the season opening Brazilian Grand Prix and went on to be classified 14th in the race itself despite retiring with gear box issues. This proved to be the car's best qualifying performance all year; from hereon both drivers would struggle to qualify (pre-qualify in Weidler's case). Danner only managed to qualify for three more races, all in the early part of the season. He finished 12th in Monaco but followed this up at the next race in the United States with a finish in the points. From last on the grid, and benefiting from an attrition afflicted race, Danner finished in fourth place. At the next race he placed eighth but this proved to be the last classification for the ARC2.
Danner failed to make the grid for the next seven races and left the team after the Portuguese Grand Prix. His replacements, first Gregor Foitek for one race and Bertrand Gachot for the last two races of the year, both failed to make the race proper. Weidler, in the other car, did not pre-qualify for nine races and was excluded from a tenth. He was replaced by Pierre-Henri Raphanel who did not fare any better.
Danner's three points scored in the United States saw Rial Racing place 13th in the Constructors' Championship. Following the end of the season, the team withdrew from Formula One.




Complete Formula One results


(key) (results in bold indicate pole position; results in italics indicate fastest lap)

* classified but not running at finish




Notes






References


Henry, Alan (1989). Autocourse 1989/90. Richmond, Surrey: Hazelton Publishing. ISBN 0-905138-62-7.
Nye, Doug (1992). Autocourse History of the Grand Prix Car 1966–1991. Richmond, Surrey: Hazelton Publishing. ISBN 0905138945.

Kata Kunci Pencarian:

• Formula Satu musim 1989
• Rial ARC2
• Rial Racing
• Gregor Foitek
• Marlboro
• Rial ARC1
• Volker Weidler
• Pierre-Henri Raphanel
• Bertrand Gachot
• Christian Danner
• 1989 Formula One World Championship