• Source: St Rollox Chemical Works

St Rollox Chemical Works was a industrial manufacturer of chemicals located in Glasgow, Scotland, that began in the Georgian era in 1799 and operated continuously until 1964. It was created by Scottish industrialist Charles Tennant and owned and operated by his family and descendants. It was described as the largest plant in Europe, if not the world.




Formation


In 1787, Tennant attended a demonstration of Claude Louis Berthollet’s chlorine bleaching process that was held by Watt in Birmingham. Tennant took the bleaching process and adapted it by substituting lime for potash, solving the problem of lime's inability to form a solution in water and opening the way to produce bleach. He received a patent No. 2209 on 23 January 1798 for the manufacture of a bleaching liquor by passing chlorine into a well-agitated mixture of lime and water that produced a strong bleaching liquor.
The new process reduced both the cost of the bleaching liquor and reduced the damage caused by the liquor to the cloth. However, the new liquid had a short shelf-life, so Tennant and Macintosh decided to license their new process and toured Lancashire manufacturers to sell the process for £200 each. In the beginning, the scheme worked relatively well, with each bleach manufacturer reporting that they were saving between £1000-£2500 per year. However, the process began to be more widely known and number of Lancashire manufacturers decided to use it without obtaining a licence from Tennant. He decided to sue for infringement of patent rights but lost in court. Tennant took the case to the Crown Court in 1802 but lost again. However, in the intervening period, Tennant came up with a new process, that was granted a patent No. 2312 on 30 April 1799 for a new bleaching powder (calcium hypochlorite). At the time, Tennant decided to open a new factory to commercially develop the product.
In 1799, Tennant, with three business partners, created the legal entity. The first of these, Dr. William Couper, was the legal advisor to the partnership. The second partner was Alexander Dunlop (His brother married Charles' eldest daughter), who served as accountant to the group. The third partner, James Knox, managed the sales department. The chemist Charles Macintosh was the fourth partner. It was decided to locate the new factory at St Rollox in North Glasgow, close to the Monkland Canal that enabled it to transport coal and ironstone from the coal mines in Lanarkshire.
In October 1838, Charles Tennant died and his son John Tennant (1796-1878) became general manager of the company. In 1890, the general decline of the company caused by the transfer to the Solvay process which was externally controlled i.e patented, led the company to merge with many other chemical manufacturers in the UK to form the United Alkali Company but continued to trade as Charles Tennant & Co. In 1913 the company was incorporated as Charles Tennant & Co Ltd.




Operation


St Rollox was started as a chlorine bleaching manufacturer that used the Claude Louis Berthollet potash-chlorine bleaching liquor and then chemically modified by substituting the potash with lime to produce a bleach. In 1799, the process changed when the company moved to the Macintosh-Tennant process to produce dry bleaching powder
The powder was made from chlorine and slaked lime that became known as Tennant’s bleaching salt. It was produced by mixing 4 parts of water, 4 1/2 parts salt, 2 parts of manganese and 4 parts of sulphuric acid known as "Vitriol" in a leaden vessel heated in water bath. The powder proved to be popular and sold well and this enabled the factory to expand and diversify internally. At the time, sulphuric acid cost £60 per ton and large quantities were needed in the production of chlorine, so Tennant decided to start producing it. By 1802, the factory was producing 252,270 lbs of vitriol per year and selling 151,117 lbs of bleaching powder per year, valued at £7500.
In 1803, St Rollox had installed six lead vessels to produce the bleach, measuring 10 x 12 feet by 10 feet high In 1803, the house that contained the vessels was of three floors about 50 foot long by 24 feet. The upper floor contained the vessels, the floor below the glass retorts for concentrating acid and the bottom floor contained the lead evaporating boilers used to bring the acid up to strength for the glass retorts. In 1807, a further eight more were added. By 1809, production capacity had been increased further, with 26 vessels in total. This was further increased by six in 1811, taking the total number to 32 and were much larger, measuring 60 x 14 x 12feet high, arranged in sets of two or three. The chambers were constructed to use external furnaces that burnt the sulphur and supplied gas by use of a flue. These were supplied by Bealy and Radcliffe of Manchester.
In 1825, when the salt tax was removed, the factory moved to producing crystal and ash soda using the Leblanc process. The process to create alkalis was to add sulphuric acid to salt that produced sodium sulphate which was known as saltcake. The cake was roasted in a vessel by furnace and lime and coal to produce sodium carbonate (soda ash) that was immersed in water for 12 hours. The resultant liquid was put into lead pans to evaporate. This enabled the factory to expand further with the use of platina lined vats to hold the vitriol concentrates instead of the less efficient lead lined, more furnaces, more warehouses and storage space as well as building a canal basin and a railway terminal. By 1850's, further expansion had added a cooperage and an iron foundry to make and repair their own equipment.
By the early 1860's, the factory was producing 8000 tons of bleaching powder, 20,000 gallons of sulphuric acid, 10,000 tons of soda ash and 8000 tons of soda crystals along with hundreds of tons of soap per year. In the 1870's the factory changed from using the Leblanc process to the newer Solvay process.
After 1892, the company ceased producing soda-based products from that point on only produced sulphuric acid.




Pollution


By the 1820's, the management of St Rollux were receiving bitter complaints due to the pollution produced by the factory. A cloud of acrid yellow smoke hung over the factory day and night. In 1822 during an enquiry into the pollution, a lawyer for one of the complainees stated "The smell of the works is at all times very offensive when the wind is north and makes her sick and inclined to vomit...Whenever the wind is in the north it pours down upon her. She considers this wholly arises from the manufacture of vitriol – and if Mr Tennant would give that up, she would let him carry on the other thing as he pleased". Another resident in the area stated of planting of hedges in the area "During the present season several thousand of seedling beeches along with six thousand seedling thorns have been entirely destroyed".
Twenty years later, a cartoon in a local magazine had the caption "St Rollox . . . a Clear Day" showed nothing but the liquid blackness of black ink covering the area.




= Tennants Stalk

=

When John Tennant became head of the plant in 1838, the problem of pollution in the form of noxious fumes was foremost in his mind, due to the continual complaints of tainted air from people who were living in the area. At the time there was several high chimneys being used at St Rollox to lift the fumes high over the bog country behind the factory, yet people still complained. While in church one Sunday he had the idea of building an exceptionally tall chimney that would take the fumes higher.
The chimney was projected by the Scottish engineer William Rankine, designed by the Scottish civil engineers Lewis Gordon and L. Hill. The civil engineer for the project was Andrew Thomson. The main contractor on the project was the bricklayer Dugald Campbell McIntyre who was the main bricklayer at St Rollox. McIntyre was initially hesitant, thinking the proposition was a joke, but eventually provided an estimate of works which was accepted.
On 29 June 1841, work began on chimney. Concrete foundations were laid at a depth of 20 feet into the bed of sandstone underlying the area.




= Waste alkali removal

=
For more than 50 years the waste piles behind the factory had been accumulating on a old peat bog that lay within a natural basin of sandstone. The compounds in the waste were lixiviated by rainfall and water from numerous springs in the area enabling a flow to be created out of the bog, described as a "yellow liquor" which consisted of a complex sulphide of calcium. The yellow liquor was allowed to flow into Pinkston Burn then into the River Kelvin which eventually reached the River Clyde. The smell coming from the yellow liquor caused a significant nuisance and an attempt was made to sink shafts into the sandstone basin with several galleries at that depth running to 300 yards in an attempt to drain the water before it reached the waste piles. In 1865, a report was prepared by the University of Glasgow chemist Thomas Anderson. which added pressure to address the pollution problem.


In 1871, James MacTear, who was the manager at St Rollox, created a chemical process to recover sulphur from the waste piles behind the factory.
It involved pumping the waste yellow liquor from the soda heaps into a special vessel, treating it with sulfurous acid to form an oxide, that was then dissolved with water, then hot hydrochloric acid was used to precipitate the sulphur, that was then dried and fused. The process was reliable, resulting in product that was cheap to produce and was widely used by manufactures, even though it recovered only 27% to 30% of the available sulphur. 1 ton of sulphur could be recovered at a cost of 61 shillings at a cost of £2000 for an apparatus, that could produce 35 tons per week and plant itself could produce 100 tons per month. The sulphur was considered of excellent purity and was generally used to make gunpowder.




Closure and destruction



During its operational lifetime, Tennants Stalk had been reduced in height down to 90 feet. In 1922, the chimney was struck by lightning and a bulge appeared on the side of it, so it was decided to demolish it. Eight workers were employed to reduce the height of the chimney by removing bricks from the top. However, the chimney suddenly collapsed, killing four of the workers and it was decided to dynamite the remains.
In the early 1960's the factory was closed as it was no longer economically viable and demolished soon after in 1964.




See also


Glasgow Works




Notes






References






= Citations

=




Bibliography






External links


Electric Scotland | The Tennants of St. Rollox, and their great chemical work
Canmore | Glasgow, 229-231 Castle Street, St Rollox Chemical Works
JISC Archive of Records of Legal titles concerning land acquired by Charles Tennant & Co, Glasgow

Kata Kunci Pencarian:

• St Rollox Chemical Works
• Chemical industry
• Charles Tennant
• Glasgow Works
• Springburn
• Royston, Glasgow
• James MacTear
• Sighthill, Glasgow
• List of tallest buildings and structures in Glasgow
• Sir Charles Tennant, 1st Baronet