• Source: Staff (music)

In Western musical notation, the staff (UK also stave; plural: staffs or staves), also occasionally referred to as a pentagram, is a set of five horizontal lines and four spaces that each represent a different musical pitch or in the case of a percussion staff, different percussion instruments. Appropriate music symbols, depending on the intended effect, are placed on the staff according to their corresponding pitch or function. Musical notes are placed by pitch, percussion notes are placed by instrument, and rests and other symbols are placed by convention.
The absolute pitch of each line of a non-percussive staff is indicated by the placement of a clef symbol at the appropriate vertical position on the left-hand side of the staff (possibly modified by conventions for specific instruments). For example, the treble clef, also known as the G clef, is placed on the second line (counting upward), fixing that line as the pitch first G above "middle C".
The lines and spaces are numbered from bottom to top; the bottom line is the first line and the top line is the fifth line.
The musical staff is analogous to a mathematical graph of pitch with respect to time. Pitches of notes are given by their vertical position on the staff and notes are played from left to right. Unlike a graph, however, the number of semitones represented by a vertical step from a line to an adjacent space depends on the key, and the exact timing of the beginning of each note is not directly proportional to its horizontal position; rather, exact timing is encoded by the musical symbol chosen for each note in addition to the tempo.
A time signature to the right of the clef indicates the relationship between timing counts and note symbols, while bar lines group notes on the staff into measures.




Usage and etymology


Staff is more common than stave in both American English and British English, with the latter being, in fact, a back-formation from the plural staves. The plural staffs also exists for staff in both American and British English, alongside the traditional plural staves. In addition to the pronunciations expected from the spellings, both plural forms are also pronounced in American English.




Staff positions



The vertical position of the notehead on the staff indicates which note to play: higher-pitched notes are marked higher on the staff. The notehead can be placed with its center intersecting a line (on a line) or in between the lines touching the lines above and below (in a space). Notes outside the range of the staff are placed on or between ledger lines—lines the width of the note they need to hold—added above or below the staff.
Which staff positions represent which notes is determined by a clef placed at the beginning of the staff. The clef identifies a particular line as a specific note, and all other notes are determined relative to that line. For example, the treble clef puts the G above middle C on the second line. The interval between adjacent staff positions is one step in the diatonic scale. Once fixed by a clef, the notes represented by the positions on the staff can be modified by the key signature or accidentals on individual notes. A clefless staff may be used to represent a set of percussion sounds; each line typically represents a different instrument.




Ensemble staves



A vertical line drawn to the left of multiple staves creates a system, indicating that the music on all the staves is to be played simultaneously. A brace (curly bracket) is used to join multiple staves that represent an instrument, such as a piano, organ, harp, or marimba. A bracket is an additional vertical line joining staves to show groupings of instruments that function as a unit, such as the string section of an orchestra. Sometimes a second bracket is used to show instruments grouped in pairs, such as the first and second oboes or first and second violins in an orchestra. In some cases, a brace is used for this purpose.
When more than one system appears on a page, often two parallel diagonal strokes are placed on the left side of the score to separate them.
Four-part SATB vocal settings, especially in hymnals, use a divisi notation on a two-staff system with soprano and alto voices sharing the upper staff and tenor and bass voices on the lower staff.
Confusingly, the German System (often in the combined forms Liniensystem or Notensystem) may refer to a single staff as well as to the Akkolade (from the French) or system in the English sense; the Italian term is accollatura.




Grand staff



When music on two staves is joined by a brace, or is intended to be played at once by a single performer (usually a keyboard instrument or harp), a grand staff (American English) or great stave (British English) is created. Typically, the upper staff uses a treble clef and the lower staff has a bass clef. In this instance, middle C is centered between the two staffs, and it can be written on the first ledger line below the upper staff or the first ledger line above the lower staff. Very rarely, a centered line with a small C clef is written, and usually used to indicate that B, C, or D on the line can be played with either hand (ledger lines are not used from a center alto as this creates confusion). When playing the piano or harp, the upper staff is normally played with the right hand and the lower staff with the left hand. In music intended for organ with pedalboard, a grand staff normally comprises three staves, one for each hand on the manuals and one for the feet on the pedalboard.




History



Early Western medieval notation was written with neumes, which did not specify exact pitches but only the shape of the melodies, i.e. indicating when the musical line went up or down; presumably these were intended as mnemonics for melodies which had been taught by rote.
During the 9th through 11th centuries a number of systems were developed to specify pitch more precisely, including diastematic neumes whose height on the page corresponded with their absolute pitch level (Longobardian and Beneventan manuscripts from Italy show this technique around the year 1000). Digraphic notation, using letter names similar to modern note names in conjunction with the neumes, made a brief appearance in a few manuscripts, but a number of manuscripts used one or more horizontal lines to indicate particular pitches.
The treatise Musica enchiriadis (c. 900) uses Daseian notation for indicating specific pitches, but the modern use of staff lines is attributed to Guido d'Arezzo (990–1050), whose four-line staff is still used (though without the red and yellow coloring he recommended) in Gregorian chant publications today. Five-line staves appeared in Italy in the 13th century and it was promoted by Ugolino da Forlì; staves with four, five, and six lines were used as late as 1600.




See also


Tablature
Sight reading
Rastrum




Notes






Further reading


Haines, John (2008). "The Origins of the Musical Staff". The Musical Quarterly. 91 (3/4). Oxford University Press: 327–378. doi:10.1093/musqtl/gdp002. JSTOR 20534535.




External links


Dolmetsch Online: Printable PDF files of musical staff (A4 size)
Audio Graffiti Free Manuscript Paper: Printable PDF files of musical staff (A4 and Letter size; standard, TAB and more; with or without clefs)
Printable files of musical staff in PDF and PostScript formats provided by Perry Roland of Alderman Library at The University of Virginia
Customizable Manuscript Paper: Customizable staff paper in varying dimensions, staff heights, thicknesses, and margins in PDF format

Kata Kunci Pencarian:

• J.C.Staff
• BTS
• Day6
• Chief of Staff
• V (penyanyi)
• Music & Media
• Gladiresik Music Lab
• Big Bang (grup musik)
• Billboard (majalah)
• Bruno Mars
• Staff (music)
• Staff
• Musical notation
• Braille music
• Rastrum
• Manuscript paper
• Staff (military)
• Hogwarts staff
• Clef
• J.C.Staff