• Source: Subsurface engineer

Subsurface engineers (also known as "completion engineers") are a subset within Petroleum Engineering and typically work closely with Drilling engineers. The job of a Subsurface Engineer is to effectively select equipment that will best suit the subsurface environment in order to best produce the hydrocarbon reserves. Once the hardware has been selected, a Subsurface Engineer will monitor and adjust the equipment to ensure the well and reservoir produces under ideal circumstances.




Overview


Subsurface engineers must design a successful well completion system by selecting equipment that is adequate for both downhole environments and applications. Considerations must be given to the various functions under which the completion equipment must operate and the effects any changes in temperatures or differential pressure will have on the equipment. The completion system must also be efficient and cost effective to achieve maximum production and financial goals. Another factor in the selection of specific completion equipment is the production rates of the well. The typical job duties of a Subsurface engineer include managing the interface between the reservoir and the well, including perforations, sand control, artificial lift, downhole flow control, and downhole monitoring equipment. Additional responsibilities of a Subsurface engineer include: performing a cost and risk analysis on the design, contacting vendors for the rental, purchase, and shipment of equipment, and working closely with fellow employees (geologists, reservoir engineers, drilling engineers, and production engineers).
The Society of Petroleum Engineers (SPE) has technical disciplines which allow SPE members to focus their attention on the technical activities that most interest them. Drilling and Completions historically have been intertwined work within Petroleum Engineering. In 2016, SPE split the Drilling and Completions technical disciplines so SPE members would be able to focus more on Drilling or Completions. SPE continues to publish the SPE Drilling & Completions journal, it has been publishing the journal since 1993. SPE illustrates the technical activities of Drilling and Completions on its website and also hosts a page about SPE offerings related to Completions engineering. SPE also has many on demand webinars on Completions topics.




Design Components


The design components considered to perform a well completion may include:

Cost and risk analysis
Determining the specifications for the wellbore clean-out
Use of specific Packer assemblies
Determining specific tool selection to operate equipment within the well
Assess possible equipment load specifications and incorporation of safety factors
Best use of flow control accessories (sliding sleeves and safety valves)
Determining the appropriate perforating shots per foot and charges based on the target formations
Acidifying the formation to inhibit flow of hydrocarbons
Sand Control operations to increase production
Prevention of formation sand production with the use of wire screens
Review Well logs to determine equipment placement within the well
Determination of specific production pipe regarding well flow rates
Selection of equipment to maintain well stability
Oversee completion operations




Suggested Reading


Clegg, Joe Dunn. Production Operations Engineering. Richardson, TX: SPE, 2007. Print.




References

Kata Kunci Pencarian:

• Balfour Beatty
• Subsurface engineer
• Petroleum engineering
• Linus Torvalds
• Bedrock
• Geotechnical engineering
• Constructed wetland
• Geological engineering
• Oil and gas reserves and resource quantification
• Engineering
• Reservoir engineering