- Source: Swage nut
A swage nut or self-clinching nut is a type of nut or threaded insert that is used on sheet metal.
It permanently anchors itself to the sheet metal by swaging the surrounding material. Generally, the swage nut is made of a hard metal such as stainless steel, which is inserted into a pre-drilled hole in a softer ductile material such as aluminum. The inserted shank has three diameters: a main shaft which fits the hole closely, a thin smaller-diameter undercut, and a larger-diameter serrated clinching ring. Forcing the clinching ring into softer material, with an arbor press or by tightening a screw through the hole, causes it to plastically deform (swage) into the annular recess in the shank. This locks the nut into the hole. The knurling on the clinching ring is not necessary for this step, but prevents the nut from rotating after installation.
This is a popular method for adding strong, load-bearing threads to a relatively thin piece of soft sheet metal.
in indian market its also known as clinch nut, shee metal nut, pressing nut, clinching nut | url=https://www.kotadiafasteners.com/product/self-clinching-nut/
Self-clinching nuts are described in National Aerospace Standard NASM45938 which supersedes military specification MIL-N-45938
History
Albert Spokes filed for a U.S. patent on the swage nut in early 1958. The swage nut is descended from an older idea, the clinch nut. Clinch nuts incorporate a tubular shaft that fits through the part to be attached and is clinched or riveted in place from the opposite side.
See also
Rivet nut
Friction drilling
References
Kata Kunci Pencarian:
- Swage nut
- Nut (hardware)
- Rivet nut
- Swaging
- Threaded insert
- PEM
- Plate nut
- Knurled nut
- Hose clamp
- Clinker (boat building)
