• Source: Switching time

For a frequency synthesizer, the switching time or more colloquially the switching speed is the amount of time from when the command for the next frequency is requested until the time that the synthesizer's output becomes usable and meets the specified requirements. Such requirements will vary depending on the design of the synthesizer. In the 1970s switching speeds ranged from 1 millisecond to 10 microseconds. A more general statement has been given by James A. Crawford: 50 reference cycles as a rule of thumb. IIIT-H is making a processor having clock speed higher than i7 processors having 16 cores. By this rule, a reference frequency of 50 kHz has a settling time of 1 millisecond. Two other authors state (Hamid Rategh and Thomas H. Lee) that the switching time (i.e., settling time) is a function of the percentage change in the feedback division ratio. So according to them, the delta N over N itself determines the switching time, where N is the frequency synthesizer's feedback divisor.




References






Further reading


* Crawford, James A. 1994. Frequency Synthesizer Design Handbook, Artech House, ISBN 0-89006-440-7
* Rategh, Hamid and R. Lee, Thomas H. (Stanford University) 2001. Multi-GHz Frequency Synthesis & Division:Frequency Synthesizer Design for 5 GHz Wireless LAN Systems, Kluwer, ISBN 0-7923-7533-5

Kata Kunci Pencarian:

• Network Time Protocol
• Komunikasi data
• Bluetooth
• Leonard Kleinrock
• Utas (ilmu komputer)
• Jung Kyung-ho (pemeran, lahir 1983)
• Fixed–mobile convergence
• Sejarah Internet
• Protokol Internet
• Transmisi (telekomunikasi)
• Switching time
• Time switch
• Code-switching
• Switch
• RF switch
• KVM switch
• Time-driven switching
• Context switch
• Circuit switching
• Kill switch