• Source: Tantalum hafnium carbide

Tantalum hafnium carbide is a refractory chemical compound with a general formula TaxHfyCx+y, which can be considered as a solid solution of tantalum carbide and hafnium carbide. It was originally thought to have the highest melting of any known substance but new research has proven that hafnium carbonitride has a higher melting point.




Properties


Individually, the tantalum and hafnium carbides have the highest melting points among the binary compounds, 4,041 K (3,768 °C; 6,814 °F) and 4,232 K (3,959 °C; 7,158 °F), respectively, and their "alloy" with a composition Ta4HfC5 has a melting point of 4,178 K (3,905 °C; 7,061 °F).
Very few measurements of melting point in tantalum hafnium carbide have been reported, because of the obvious experimental difficulties at extreme temperatures. A 1965 study of the TaC-HfC solid solutions at temperatures 2,225–2,275 °C found a minimum in the vaporization rate and thus maximum in the thermal stability for Ta4HfC5. This rate was comparable to that of tungsten and was weakly dependent on the initial density of the samples, which were sintered from TaC-HfC powder mixtures, also at 2,225–2,275 °C. In a separate study, Ta4HfC5 was found to have the minimum oxidation rate among the TaC-HfC solid solutions. Ta4HfC5 was manufactured by Goodfellow company as a 45 μm powder at a price of $9,540/kg (99.0% purity).
In 2015, atomistic simulations predicted that hafnium carbonitride could have a melting point exceeding Ta4Hf1C5 by 200 K. This was later verified by experimental evidence in 2020.




Structure


Individual tantalum and hafnium carbides have a rocksalt cubic lattice structure. They are usually carbon deficient and have nominal formulas TaCx and HfCx, with x = 0.7–1.0 for Ta and x = 0.56–1.0 for Hf. The same structure is also observed for at least some of their solid solutions. The density calculated from X-ray diffraction data is 13.6 g/cm3 for Ta0.5Hf0.5C. Hexagonal NiAs-type structure (space group P63/mmc, No. 194, Pearson symbol hP4) with a density of 14.76 g/cm3 was reported for Ta0.9Hf0.1C0.5.




See also


Tantalum carbide
Hafnium carbide
Hafnium carbonitride




References

Kata Kunci Pencarian:

• Nikel
• Boron
• Berilium
• Niobium
• Teknesium
• Kamus rumus kimia
• Tantalum hafnium carbide
• Tantalum carbide
• Hafnium carbide
• Hafnium
• Carbide
• Refractory
• Tantalum
• Zirconium carbide
• Hafnium compounds
• Phase transition