Search Results for “traffic break”

Source: Traffic break

A traffic break is any separation in the flow of traffic—naturally occurring or otherwise—along a road or highway. In heavily congested traffic, natural breaks occur rarely, thus the term traffic break most commonly refers to the manual separation of traffic, normally conducted by highway patrol officers.
Most such traffic breaks are used to clear a hazardous obstruction from the road or to allow a stalled vehicle to safely make its way off the road and onto the shoulder. For example, a highway patrol officer may arrive at the site of the accident and then radio to another officer to initiate a traffic break. The second officer enters traffic before the site of the accident, turns on their warning lights, and begins weaving across multiple lanes to signal that other drivers are to slow down and remain behind the officer. The speed to which the officer slows is based on the amount of time needed to clear the accident ahead. An officer may completely stop traffic to yield larger separation. The second officer then radios ahead to the first officer, who is still at the site of the accident, and gives them a description of the last vehicle traveling ahead at regular speeds. The first officer will use this information to determine when it is safe to move the accident off the road and onto the shoulder.
Traffic breaks may also be conducted to gradually slow traffic in preparation for a large accident ahead that has caused traffic to stop abruptly. This greatly reduces the chance of subsequent crashes due to motorists not braking in time. Other traffic breaks may give time for construction activities to be completed uninterrupted. Some construction requires equipment that obstructs the flow of traffic to a point that it becomes a major hazard to have traffic trying to travel around them, such as adjusting the placement of a traffic sign, (re)striping lane markers, or sweeping the roadway. Alternatively, some construction would produce dangerous conditions to passing vehicles, such as blasting. In rare circumstances, civilian motorists have initiated traffic breaks. In 2004, one Alameda County man ran a traffic break to aid in the emergency landing of a small Cessna 172 on Interstate 580.
When a single traffic break does not allow sufficient time to complete a task, multiple breaks may be conducted in series. This practice is called "running a round-robin".