• Source: Walther CCP
  • The Walther CCP (Concealed Carry Pistol) is a delayed blowback semi-automatic pistol developed by Carl Walther Sportwaffen for the concealed carry civilian market.


    Product evolution


    The Walther CCP was introduced in March 2014. It is available chambered in 9×19mm Parabellum.
    In September 2018 Walther introduced the updated CCP M2 onto the market. Its most significant upgrade was a take-down lever that eased the field stripping, which was often cited as original M1 design's biggest shortcoming.
    Circa January 2019, Walther introduced the CCP M2 380, a variant with .380 ACP a caliber option. The CCP M2 380 became available to markets in January 2020.


    Design details


    The Walther CCP is operated by a gas-delayed blowback system, using gas pressure from the ignited cartridge by directing it through a small port in the barrel in front of the chamber to slow down and delay the rearward motion of the slide. This design is nearly identical to the design of the Heckler & Koch P7. Walther calls this system Softcoil. Unlike the Walther P99 or Walther PPQ, the CCP has a slim manual thumb safety. There is an additional internal safety that acts as a firing pin block. The ergonomic grip is a shorter version of the PPQ's grip. The capacity of the magazine is 8 rounds. The CCP has an overall length of 6.41 inches (163 mm) , its width is 1.18 inches (30 mm) and its height is 5.1 inches (130 mm). The length of the barrel is 3.54 inches (90 mm). Considering the CCP's size, the 5.5-pound-force (24 N) trigger pull and the 0.27-inch (6.9 mm) trigger travel are relatively high.
    Field stripping of the original CCP design (M1), required a special disassembly tool, while the revised CCP/M2 features a takedown lever for tool-less disassembly.

    Walther has prepared a list of "test" ammunition and suggested grip instructions for best function, available to owners of the pistol upon request.


    Recall


    In March 2017, Walther issued a recall notice on all CCP pistols, because of what they call a potential condition in the CCP that can cause the firearm, if dropped, to discharge regardless of the manual safety being engaged or disengaged. Walther has issued a voluntary recall as a result and will be upgrading all affected CCPs in order to remove the risk of a drop-fire.


    See also


    Arsenal P-M02—another pistol using the Barnitzke system
    Heckler & Koch P7—another pistol using the Barnitzke system
    Steyr GB—another pistol using the Barnitzke system


    References




    External links


    Walther CCP on the official German Walther website
    Walther CCP on the Walther Arms website
    Review
    Review of the Walther CCP by Handgunning Magazine.Walther CCP 9mm Review
    Walther's official recall notice

Kata Kunci Pencarian: