4350

      Kata Kunci Pencarian: 4350

      43502-kk0104350 ringgit berapa rupiah4350 usd to idr4350435004350 dollar berapa rupiah43502-0k0304350 riyal berapa rupiah43502-bz0204350g Search Results

      4350

      Daftar Isi

      Hodgdon 4350 vs. IMR 4350 | Sniper's Hide Forum

      I have been working up loads for my GAP 260 and have found that both of these powders perform extremely well. So well, that it is hard to tell the difference. Groups are excellent and I would be very confident in either one. In fact, I had settled on IMR 4350 based on availability but found...

      Hornady 147 gr ELD-M (H4350 and RL16 Preferred) - Sniper's Hide

      Apr 3, 2017 · Happened back across this; can’t view the last set of the 140s & 147s; 143s and RL17 is self explanatory, but it doesn’t look like your rifle likes the 4350 harmonics, and from the velocities, looks like this bullet/powder coating combo is a not ideal, some factor contributing to inconsistenet ignition.

      IMR 4350 vs. H4350 in 6.5 Creedmoor | Sniper's Hide Forum

      Apr 26, 2012 · IMR 4350 is 50-100$ more as well… I bought mine a couple years ago and have well over a 23 pounds left so I guess I’m going to get very comfortable with 6.5 Creedmoor and IMR 4350. The only thing I noticed, but IMR 4350 is the Colonels are not as short as each 4350 and apparently the velocity swings in temperature

      IMR 4350 for 308 Win | Sniper's Hide Forum

      Apr 11, 2012 · Saw a few questions on this site about accuracy only load for 308 Win. Just to let people know, for kicks & grins, I tried IMR 4350 for 308 Win, 168 SMK, 26 in, 1 in 12 twist, and got great accuracy even though a tech told me they DO NOT recommend it. …

      300 win mag load with 4350 | Sniper's Hide Forum

      Hey guys looking for a load for my 300 win mag. I am using what I have been able to get my hands on the last few months. Here is what I have Once fired winchester brass will be FL resizing Hodgdon H4350 powder CCI LR Mag primers or Rem 9 1/2 LR Mag Primers Sierra 180 Gr. Gameking bullets I...

      IMR 4350 Temperature variance? | Sniper's Hide Forum

      Oct 15, 2009 · IMR 4350 does have some temp sensitivity issues, you are shooting a load that previously was zeroed in 50 degree temp, now you are shooting it in 80 degree temps. You think its shooting a little hotter, well you are probably right.

      Why not 4350 for the .308? | Sniper's Hide Forum

      Jun 30, 2014 · Consensus seems to be that 4350 (whether H or IMR) is too slow for this chambering- especially the heavier 175 grain pills. What I don't get, it that I shoot 162's from my 7-08 with 4350. Same case, just necked-down. Bullets are pretty close in weight. So what accounts for the unsuitability- is it the smaller bore diameter of the 7mm?

      IMR 4350 / Hodgdon H4350 interchangeable? | Sniper's Hide Forum

      Nov 17, 2009 · Intended use is for 6.5 Creedmoor. I'm wondering if a 41.5 gr load of H4350 would be interchangeable with a IMR 4350 41.5 gr load. I seem to remember reading somewhere they are basically the same powder.

      H4350 and 308 | Sniper's Hide Forum

      Mar 4, 2008 · For a general load with nearly all projectiles in a 308 use Varget it is perfect. As for 4350 in a M1 Garand DONT you will damage the rifle the powder used was 4895 remember that ina Garand that the pressure curve should be fast if you use a slow powder their will be pressure in the gas poer after the bolt unlocks not a good idea.

      150gr. 30-06 | Sniper's Hide Forum

      Dec 12, 2013 · Alright so I have just loaded up my first batch of 50 rounds for the 30-06 cartridge. I am using Hornady 150gr. round nose Interlocks over 51 grains of IMR 4350, CCI #200 primer in fire-formed Winchester and Remington brass. Everything was going great until I read that the minimum length should be 3.2". I am getting ~3.05/10" with these loads.