7.2
6.6
6.3
6.1
7
7.7
6.9
6.149
6.7
3.625
7.447
High energy ignition GudangMovies21 Rebahinxxi LK21
High energy ignition, also known as H.E.I., is an electronic ignition system designed by the Delco-Remy Division of General Motors. It was used on all GM vehicles, at least in the North American market, from 1975 through the mid-1980s. The system is an electronic system that requires no scheduled maintenance, provides up to 35,000 volts to fire the spark plugs and increase spark plug life, especially when unleaded fuel is used. The HEI system has 40% more voltage output and 85% higher energy level than conventional breaker point systems to fire lean fuel mixtures even under adverse conditions.
There were many design variations over the years, and provisions for computer controls were added for some applications starting in the late 1970s. A predecessor system called "Unitized Ignition" was optional on 1972 and 1973 Pontiacs.
Most—but not all—HEI systems have the ignition coil mounted in the distributor cap. A control module and magnetic pickup are mounted in the distributor, in place of a conventional ignition system's breaker points and condenser.
Description
The HEl system was developed as an integrated package that combines the distributor, magnetic pick-up, ignition coil and electronic module into one package. By doing this, these components are well protected from physical and environmental abuses and the number of electrical connections are reduced.
There are some models that use a remotely mounted coil. This coil is constructed the same as the integral coil with the exception of a mounting bracket and a terminal for the connection of a high tension lead. These models are used on engines where additional clearance was needed.
The size of the distributor was increased due to the wide spacing that must exist between the' distributor cap Inserts to prevent high voltage arc-over. A wider spacing was also needed between the cap, inserts and the distributor housing to prevent arc-over and leakage to ground.
The higher voltage output of the HEI system required new insulation materials. To prevent ignition failure due to carbon tracking, a special material is used for the distributor cap and rotor. IT is a thermoplastic, injection-molded, glass-reinforced polyester. This material provided the dielectric and insulation properties needed and also prevented carbon tracking.
The high voltage terminals used in the distributor cap are similar in appearance to spark plug terminals. These connections provide easier attachment and better sealing of the connections. Latches are used to ensure proper connections of the plug wires to the cap and prevent any loosening or movement which might reduce the moisture of the connection.
The spark plug wires are a carbon-impregnated cord conductor encased in an 8 millimeter diameter silicone jacket. Silicone wiring will withstand very high temperature and is an excellent insulator for higher voltages.
Control modules
There are four basic types of HEI control modules: four-, five-, seven-, and eight-pin. The four-pin module was used on carbureted engines and uses conventional mechanical timing controls (vacuum and centrifugal advance mechanisms). The five-pin module was introduced in 1978 and was an early attempt at electronic timing control; it contains a provision for connecting a knock sensor. The seven- and eight-pin modules are used on early computer-controlled engines in conjunction with fixed-timing distributors, as the computer controls the ignition timing.
Pick-up Coils
The pick-up coil is not serviced separately but as an assembly with the bottom plate, pole piece and permanent magnet. This assembly, called the "pole piece and plate" in the parts book, should not be disassembled because the pole piece is centered around the axis of the distributor during production. This sets the clearance between the teeth of the pole piece and timer core.
There are seven different pole pieces and plate assemblies available. The correct part number of the pole piece and plate assembly for a particular vehicle should be determined from the appropriate parts book. The part number of a pole piece and plate assembly can be dete3rmined by visual inspection by the colored ties or connectors ant he number of teeth on the timer core and pole piece. The following is a list of pole piece and plate assemblies by pick-up coil color code.
Blue tie or black connector body: 1876210 (V-8), 1891209 (V-6), 1880020 (L-4)
Yellow tie or yellow connector body: 1875981 (V-8), 1880040 (L-6), 1892175 (L-4)
Clear tie or clear connector body: 1876495 (V-8)
Yellow connector: 1894237 V-6 (200 CID)
Black connector: 1893894 V-6 even fire (196, 231 CID)
In the oil filled ignition coil used with conventional ignition systems, the primary winding is wrapped around the secondary winding and the secondary winding is wrapped around the iron core. The HEI coil has the secondary winding wrapped around the primary winding and the primary winding is wrapped around the iron core. The HEI coil is not oil filled; instead, the windings are covered in an epoxy compound for protection against moisture and arc-over within the coil.
Primary current is increased by reducing the length of wire used in the primary windings, thus reducing resistance.
Inductance values of the primary and secondary winding are also different in the HEI coil. Increased secondary inductance provide a higher voltage and a longer spark duration than the conventional system.
Upgrading
HEI distributors are a popular swap on older GM cars originally equipped with points and condenser type ignition systems. The HEI system produces a more powerful spark, which allows for a wider spark plug gap for surer ignition of a fuel/air mix that may not be optimal. The HEI setup has also become a popular swap into non-GM vehicles.
References
External links
http://delcoremyhistory.com/history.htm
http://www.pontiacpower.org/HEI.pdf
http://delcoremyhistory.com/history.htm
https://saemobilus.sae.org/content/750346/#abstract
Kata Kunci Pencarian:
high energy ignitionhigh energy ignition coilhigh energy ignition system flarehigh energy ignition unithigh energy ignition devicehigh energy ignition systemhigh energy ignition modulehigh energy ignition unit aircrafthigh energy ignition testerhigh energy ignition distributor
High Energy Ignition | Unifire
High Energy Ignition (HEI) Equipment – Control Systems Company
High-energy ignition systems - DSF
High-energy ignition systems - DSF
High Energy Ignition System - Pstechnology
High Energy Ignition System - Pstechnology
High Energy Ignition System - Pstechnology
High Energy Ignition System - Glenham Mills
High Energy Electronic Ignition | Classic Car Blog
High Energy Single Inductive Ignition Coil
High Energy Single Inductive Ignition Coil
High Energy Ignition, HD Png Download - kindpng
Search Resultshigh energy ignition
Daftar Isi
High energy ignition - Wikipedia
High energy ignition, also known as H.E.I., is an electronic ignition system designed by the Delco-Remy Division of General Motors. It was used on all GM vehicles, at least in the North American market, from 1975 through the mid-1980s.
HEI Distributors - Addressing 10 Common Myths - Super Chevy ...
Jun 25, 2006 · We analyze 10 common myths regarding HEI (High Energy Ignitions) distributor system including ones regarding internal coils, billet housings, performance gains, vacuum advance, and plug wires...
When did Chevy start using HEI distributors? | AHG Auto Service
Apr 26, 2024 · Chevrolet started using HEI (High Energy Ignition) distributors in 1974. The HEI distributor replaced the previously used contact points and condenser system with a control module and a magnetic pickup inside the housing.
The HEI Distributor: Clearing The Confusion And Debunking Myths
Feb 23, 2022 · When discussing reliable, easy-to-use ignition systems, the HEI distributor is one that securely tops the list. A single 12-volt wire is all that is required to function, and it can be easily stabbed into any distributor-fired Chevrolet engine.
GM High Energy Ignition Electronic Distributor - Tuning and ...
Nov 1, 2006 · Read about how to install GM's Advanced High Energy Ignition electronic distributor in 4Wheel & Off-Road Magazine.
CC Tech: HEI – GM’s Superior Sparks, At Home and Elsewhere
Feb 16, 2019 · There’s a sturdy argument to be made that GM’s HEI (High-Energy Ignition) is so damn good because GM were so damn fixated on being so damn cheap. Wait…what? How does that reckon? Simple: it was less costly than anything else they could’ve done.
AR/GS HIGH ENERGY IGNITION SYSTEM - Zeeco
Our high energy capacitive discharge technology provides robust ignition with dependable performance, and is the same technology used by the aerospace industry to ignite jet aircraft engines. Zeeco’s AR/GS HEI System can be installed in new or existing applications and is available in multiple sizes up to 2 MMBtu/hr.
