history of measurement

Video: history of measurement

      History of measurement GudangMovies21 Rebahinxxi LK21

      The earliest recorded systems of weights and measures originate in the 3rd or 4th millennium BC. Even the very earliest civilizations needed measurement for purposes of agriculture, construction and trade. Early standard units might only have applied to a single community or small region, with every area developing its own standards for lengths, areas, volumes and masses. Often such systems were closely tied to one field of use, so that volume measures used, for example, for dry grains were unrelated to those for liquids, with neither bearing any particular relationship to units of length used for measuring cloth or land. With development of manufacturing technologies, and the growing importance of trade between communities and ultimately across the Earth, standardized weights and measures became critical. Starting in the 18th century, modernized, simplified and uniform systems of weights and measures were developed, with the fundamental units defined by ever more precise methods in the science of metrology. The discovery and application of electricity was one factor motivating the development of standardized internationally applicable units.


      Sources of information



      The comparison of the dimensions of buildings with the descriptions of contemporary writers is another source of information. An interesting example of this is the comparison of the dimensions of the Greek Parthenon with the description given by Plutarch from which a fairly accurate idea of the size of the Attic foot is obtained. Because of the comparative volume of artifacts and documentation, much more is known today about the state-sanctioned measures of large, advanced societies than about those of smaller societies or about the informal measures that often coexisted with official ones. In some cases, there are only plausible theories and different interpretations can be matched to the evidences.
      It is possible to group official measurement systems for large societies into historical systems that are relatively stable over time, including: the Babylonian system, the Egyptian system, the Phileterian system of the Ptolemaic age, the Olympic system of Greece, the Roman system, the British system, and the metric system.


      Earliest known measurement systems



      The earliest known uniform systems of weights and measures seem all to have been created at some time in the 4th and 3rd millennia BC among the ancient peoples of Egypt, Mesopotamia and the Indus Valley, and perhaps also Elam (in Iran) as well.
      Early Babylonian and Egyptian records and the Hebrew Bible indicate that length was first measured with the forearm, hand, or finger and that time was measured by the periods of the sun, moon, and other heavenly bodies. When it was necessary to compare the capacities of containers such as gourds or clay or metal vessels, they were filled with plant seeds which were then counted to measure the volumes. When means for weighing were invented, seeds and stones served as standards. For instance, the carat, still used as a unit for gems, was derived from the carob seed.


      History of units




      = Units of length

      =
      Before the establishment of the decimal metric system in France during the French Revolution in the late 18th century, many units of length were based on parts of the human body.
      The Nippur cubit was one of the oldest known units of length. The oldest known metal standard for length corresponds to this Sumerian unit and dates from 2650 BCE. This copper bar was discovered in Nippur, on the banks of the Euphrates, and is kept in the Istanbul Archaeological Museum. Archaeologists consider that this 51.85 centimetres long unit was the origin of the Roman foot. Indeed, the Egyptians divided the Sumerian cubit into 28 fingers and 16 of these fingers gave a Roman foot of 29.633 cm.


      = Units of mass

      =
      The grain was the earliest unit of mass and is the smallest unit in the apothecary, avoirdupois, Tower, and troy systems. The early unit was a grain of wheat or barleycorn used to weigh the precious metals silver and gold. Larger units preserved in stone standards were developed that were used as both units of mass and of monetary currency. The pound was derived from the mina (unit) used by ancient civilizations. A smaller unit was the shekel, and a larger unit was the talent. The magnitude of these units varied from place to place. The Babylonians and Sumerians had a system in which there were 60 shekels in a mina and 60 minas in a talent. The Roman talent consisted of 100 libra (pound) which were smaller in magnitude than the mina. The troy pound (~373.2 g) used in England and the United States for monetary purposes, like the Roman pound, was divided into 12 ounces, but the Roman uncia (ounce) was smaller. The carat is a unit for measuring gemstones that had its origin in the carob seed, which later was standardized at 1/144 ounce and then 0.2 gram.
      Goods of commerce were originally traded by number or volume. When weighing of goods began, units of mass based on a volume of grain or water were developed. The diverse magnitudes of units having the same name, which still appear today in our dry and liquid measures, could have arisen from the various commodities traded. The larger avoirdupois pound for goods of commerce might have been based on volume of water which has a higher bulk density than grain.
      The stone, quarter, hundredweight, and ton were larger units of mass used in Britain. Today only the stone continues in customary use for measuring personal body weight. The present stone is 14 pounds (~6.35 kg), but an earlier unit appears to have been 16 pounds (~7.25 kg). The other units were multiples of 2, 8, and 160 times the stone, or 28, 112, and 2240 pounds (~12.7 kg, 50.8 kg, 1016 kg), respectively. The hundredweight was approximately equal to two talents. The "long ton" is equal to 2240 pounds (1016.047 kg), the "short ton" is equal to 2000 pounds (907.18474 kg), and the tonne (or metric ton) (t) is equal to 1000 kg (or 1 megagram).


      = Units of time and angle

      =
      The division of the circle into 360 degrees and the day into hours, minutes, and seconds can be traced to the Babylonians who had a sexagesimal system of numbers. The 360 degrees may have been related to a year of 360 days. Many other systems of measurement divided the day differently—counting hours, decimal time, etc. Other calendars divided the year differently.


      Forerunners of the metric system


      Decimal numbers are an essential part of the metric system, with only one base unit and multiples created on the decimal base, the figures remain the same. This simplifies calculations. Although the Indians used decimal numbers for mathematical computations, it was Simon Stevin who in 1585 first advocated the use of decimal numbers for everyday purposes in his booklet De Thiende (old Dutch for 'the tenth'). He also declared that it would only be a matter of time before decimal numbers were used for currencies and measurements. His notation for decimal fractions was clumsy, but this was overcome with the introduction of the decimal point, generally attributed to Bartholomaeus Pitiscus who used this notation in his trigonometrical tables (1595).
      In 1670, Gabriel Mouton published a proposal that was in essence similar to John Wilkins' proposal for a universal measure, except that his base unit of length would have been 1/1000 of a minute of arc (about 1.852 m) of geographical latitude. He proposed calling this unit the virga. Rather than using different names for each unit of length, he proposed a series of names that had prefixes, rather like the prefixes found in SI.
      In 1790, Thomas Jefferson submitted a report to the United States Congress in which he proposed the adoption of a decimal system of coinage and of weights and measures. He proposed calling his base unit of length a "foot" which he suggested should be either 3⁄10 or 1⁄3 of the length of a pendulum that had a period of one second—that is 3⁄10 or 1⁄3 of the "standard" proposed by John Wilkins over a century previously. This would have equated to 11.755 English inches (29.8 cm) or 13.06 English inches (33.1 cm). Like Wilkins, the names that he proposed for multiples and subunits of his base units of measure were the names of units of measure that were in use at the time. The great interest in geodesy during this era, and the measurement system ideas that developed, influenced how the continental US was surveyed and parceled. The story of how Jefferson's full vision for the new measurement system came close to displacing the Gunter chain and the traditional acre, but ended up not doing so, is explored in Andro Linklater's Measuring America.


      Metric conversion



      The metric system was first described in 1668 and officially adopted by France in 1799. Over the 19th and 20th centuries, it became the dominant system worldwide, although several countries, including the United States, China, and the United Kingdom continue to use their customary units. Among the numerous customary systems, many have been adapted to become an integer multiple of a related metric unit: The Scandinavian mile is now defined as 10 km, the Chinese jin is now defined as 0.5 kg, and the Dutch ons is now defined as 100 g.


      See also



      Historical metrology
      Metrication


      References



      This article incorporates public domain material from Specifications, Tolerances, and Other Technical Requirements for Weighing (Handbook 44 -2018). National Institute of Standards and Technology.


      Further reading


      , Measures and Weights in the Islamic World. An English Translation of Professor Walther Hinz's Handbook “Islamische Maße und Gewichte“, with a foreword by Professor Bosworth, F.B.A. Kuala Lumpur, ISTAC, 2002, ISBN 983-9379-27-5. This work is an annotated translation of a work in German by the late German orientalist Walther Hinz, published in the Handbuch der Orientalistik, erste Abteilung, Ergänzungsband I, Heft 1, Leiden, The Netherlands: E. J. Brill, 1970.
      Scales and Weights: A Historical Outline, Bruno Kisch. (New Haven: Yale University Press, 1965). Based in part on the Edward C. Streeter collection at Yale Medical Historical Library
      Kula, Witold, Measures and Men. 1986. Translated by R. Szreter. Princeton University Press. ISBN 9780691639079.
      Lugli, Emanuele, The making of measure and the promise of sameness. Chicago 2019. ISBN 9780226612492. OCLC 1051680735.

    Kata Kunci Pencarian: history of measurement

    history of measurementhistory of measurement pdfhistory of measurement in psychologyhistory of measurement in physicshistory of measurement mathhistory of measurement unitshistory of measurement grade 7history of measurement timelinehistory of measurement ppthistory of measurement book Search Results

    history of measurement

    Daftar Isi

    History of measurement - Wikipedia

    It is possible to group official measurement systems for large societies into historical systems that are relatively stable over time, including: the Babylonian system, the Egyptian system, the Phileterian system of the Ptolemaic age, the Olympic system of Greece, the Roman system, the British system, and the metric system.

    Origins of Measurements - Fact Monster

    Feb 21, 2017 · Lick: A Lick was used by the Greeks to measure the distance from the tip of the thumb to the tip of the index finger. Pace: The ancient Roman soldiers marched in paces, which were the length of a double step, about 5 feet; 1,000 paces was a mile. Today, a pace is the length of one step, 2 1 /2 to 3 feet. Measurements. Inch = 0.083 feet; Foot ...

    HISTORY OF MEASUREMENT | Historyworld

    Length is the most necessary measurement in everyday life, and units of length in many countries still reflect humanity's first elementary methods. The inch is a thumb. The foot speaks for itself. The yard relates closely to a human pace, but also derives from two cubits (the measure of …

    Measurement – a timeline - Science Learning Hub

    There are multiple examples throughout history of length measurements based on various body parts. One ‘hand’ is measured across the widest part of the palm including a closed thumb. It is still used to measure the height of horses. Today, one hand = 4 inches = 101.6 mm. Image: Fragment of a cubit measuring rod. Public domain

    History of Measurement - Instrumentation Tools - Inst Tools

    People have been measuring since they began to buy, own and sell things, which means that the history of measurement is as long as that of civilization. And here comes the measurement in scope. Now humans need some system so all things are equally distributed. The earliest known records of measurement originated in 3000 BC in Egypt.

    History of measurements | PPT - SlideShare

    Jun 21, 2015 · The document provides a history of measurement systems from ancient times to the modern SI system. It begins with the cubit measurement used in ancient Egypt for building pyramids around 2750 BC. Over time, measurements evolved from human body parts like hands and feet to standardized systems like the metric system in the 18th century.

    History of Measuring Instruments - Malevus

    Nov 19, 2023 · Global Measurement Standard. The concept of standardized units of measurement became more widespread during the late 18th century. The metric system, which introduced a decimal-based system of measurement, was officially adopted in France in 1795 and later spread to many parts of the world, providing a universal standard for measurement.

    History of Measurement - University of Cincinnati

    What is needed to measure length? •Remember from last week’s video •Unit •Measurement •Comparison •Unit •Using body parts •Using plants •Measurement •Which body part (ie, hand, foot, etc) •Which plant (ie, barleycorn) •Comparison •Whose body part •What parts (ie, seeds)

    A Brief History of Measurement - AIChE

    The history of measurement science, or metrology, spans thousands of years. The bases for the English units of measurement have been defined and refined (and sworn at) over the past 6,000 years. Metric units are comparatively new, having been developed only over the past 240 years. These systems dominate modern measurement.

    History of Measurements - Vitrek

    The History of Measurements Measurement, loosely defined is the length, amount, or size of something that is measured. Long ago, the idea of a universal measuring system didn’t exist. That was, until the 18th century where measurement became a cohesive system. Before this period, countries such as France had measuring systems for nearly every