• Source: 2017 LTi Printing 200

The 2017 LTi Printing 200 was the 13th stock car race of the 2017 NASCAR Camping World Truck Series and the 18th iteration of the event. The race was held on Saturday, August 12, 2017, in Brooklyn, Michigan at Michigan International Speedway, a two-mile (3.2 km) permanent moderate-banked D-shaped speedway. The race took the scheduled 100 laps to complete. At race's end, Bubba Wallace, driving for MDM Motorsports, would defend fiercely for the final 11 laps of the race to win his sixth and to date, final career NASCAR Camping World Truck Series win and his only win of the season. To fill out the podium, Christopher Bell and Kyle Busch, both driving for Kyle Busch Motorsports, would finish second and third, respectively.




Background



The race was held at Michigan International Speedway, a two-mile (3.2 km) moderate-banked D-shaped speedway located in Brooklyn, Michigan. The track is used primarily for NASCAR events. It is known as a "sister track" to Texas World Speedway as MIS's oval design was a direct basis of TWS, with moderate modifications to the banking in the corners, and was used as the basis of Auto Club Speedway. The track is owned by International Speedway Corporation. Michigan International Speedway is recognized as one of motorsports' premier facilities because of its wide racing surface and high banking (by open-wheel standards; the 18-degree banking is modest by stock car standards).




= Entry list

=
(R) denotes rookie driver.
(i) denotes driver who is ineligible for series driver points.




Practice






= First practice

=
The first practice session was held on Friday, August 11, at 1:00 PM EST, and would last for 55 minutes. Matt Crafton of ThorSport Racing would set the fastest time in the session, with a lap of 38.350 and an average speed of 187.744 miles per hour (302.145 km/h).




= Second and final practice

=
The second and final practice session, sometimes known as Happy Hour, was held on Friday, August 11, at 3:00 PM EST, and would last for 55 minutes. John Hunter Nemechek of NEMCO Motorsports would set the fastest time in the session, with a lap of 38.545 and an average speed of 186.795 miles per hour (300.617 km/h).




Qualifying


Qualifying was held on Saturday, August 12, at 9:30 AM EST. Since Michigan International Speedway is at least 1.5 miles (2.4 km), the qualifying system was a single car, single lap, two round system where in the first round, everyone would set a time to determine positions 13–32. Then, the fastest 12 qualifiers would move on to the second round to determine positions 1–12.
Matt Crafton of ThorSport Racing would win the pole, setting a lap of 39.076 and an average speed of 184.256 miles per hour (296.531 km/h) in the second round.
No drivers would fail to qualify.




= Full qualifying results

=




Race results


Stage 1 Laps: 30

Stage 2 Laps: 30

Stage 3 Laps: 40




Standings after the race






References

Kata Kunci Pencarian:

• Darrell Wallace, Jr.
• NASCAR Seri Xfinity musim 2018
• 2017 LTi Printing 200
• Bubba Wallace
• NASCAR Craftsman Truck Series at Michigan International Speedway
• 2019 LTi Printing 250
• 2017 UNOH 200
• Cabo Wabo 250
• 2017 Overton's 150
• List of the closest NASCAR Truck Series finishes
• Mein Kampf
• 2017 Bar Harbor 200