• Source: 2019 LTi Printing 250

The 2019 LTi Printing 250 is a NASCAR Xfinity Series race held on June 8, 2019, at Michigan International Speedway in Brooklyn, Michigan. Contested over 125 laps on the 2.5-mile (4.0 km) D-shaped oval, it was the 13th race of the 2019 NASCAR Xfinity Series season.




Background






= Track

=
Michigan International Speedway is a moderate-banked D-shaped speedway located in Brooklyn, Michigan. The track is used primarily for NASCAR events. It is sometimes known as a "sister track" to Texas World Speedway, and was used as the basis of Auto Club Speedway. The track is owned by International Speedway Corporation. Michigan International Speedway is recognized as one of motorsports' premier facilities because of its wide racing surface and high banking (by open-wheel standards; the 18-degree banking is modest by stock car standards).




Entry list






Practice






= First practice

=
Christopher Bell was the fastest in the first practice session with a time of 38.143 seconds and a speed of 188.763 mph (303.785 km/h).




= Final practice

=
Christopher Bell was the fastest in the final practice session with a time of 38.091 seconds and a speed of 189.021 mph (304.200 km/h).




Qualifying


Paul Menard scored the pole for the race with a time of 37.237 seconds and a speed of 193.356 mph (311.176 km/h).




= Qualifying results

=




Race






= Summary

=




= Stage Results

=
Stage One
Laps: 30

Stage Two
Laps: 30




= Final Stage Results

=
Stage Three
Laps: 65




References

Kata Kunci Pencarian:

• NASCAR Seri Xfinity musim 2018
• Darrell Wallace, Jr.
• 2019 LTi Printing 250
• Cabo Wabo 250
• KC Motorgroup
• Michigan International Speedway
• 2019 Pocono Green 250
• 2019 CircuitCity.com 250
• Tyler Hill (racing driver)
• 2017 Fred's 250
• 2019 NASCAR Xfinity Series
• Joe Graf Jr.