- Source: Ferrari 365 P Berlinetta Speciale
See Ferrari 365 P2 for the race car
The Ferrari 365 P Berlinetta Speciale (also commonly referred to as the Berlinetta Tre-posti) was a concept sports car designed and produced by Pininfarina and Ferrari in 1966. It featured a mid-engined layout of a donor racing car chassis and three-seat arrangement with a central driving position, as later popularised with the McLaren F1. It was the first purpose-built, mid-engine, road-going Ferrari-branded car. Other similar Ferraris at that time were road-usable race cars like the 1965 250 LM 'Speciale'.
Development
The conversion of racing cars' engine position from the front to the rear-mid position, did start to slowly influence the automakers to produce road cars with this specification. The first production car with this configuration was the 1962 René Bonnet Djet. With this change came the requirements for styling to match the new mechanicals. The development of a mid-engine, road-going sports car was inevitable and Pininfarina built three Ferrari-based prototypes to be at the forefront of this revolution. One of those projects was the "Tre-posti" or a three-seater in Italian, the Ferrari 365 P Berlinetta Speciale.
Sergio Pininfarina was responsible for the initiation of the project as soon to be Head of Pininfarina. Up to this point Enzo Ferrari steadfastly refused to create a road-going car with a V12 engine in the mid-rear position and to involve an untraditional design language. Both US Ferrari importer Luigi Chinetti and Head of Fiat Gianni Agnelli were interested in acquiring such cars for themselves.
While Ferrari did not immediately create any road cars in this specification, the Berlinetta Speciale did influence the marque's future styling and eventually the 365 GT/4 Berlinetta Boxer prototype emerged by 1971.
= Design
=The exterior design was loosely based on the existing road-going Dino concept, already sporting a mid-engine layout and presented just a year earlier, in 1965. Aldo Brovarone as Pininfarina's soon to be Head of Styling and creator of all the road-going Dino exterior designs, is also credited with the Berlinetta Speciale. Because of the many similarities to the production Dino 206 GT, the Berlinetta Speciale is both seen as a scaled up version of the original Dino and its predecessor, presented at the same time as the Dino Berlinetta GT final prototype, in 1966.
Pininfarina created the bodies in aluminium, over a mid-engine competition chassis. The most unusual feature was the triple seating with the driver situated in the center, slightly forward, with the other two seats placed slightly behind. The center-mount windshield wiper was carried over from the donor race car. New were the luxury additions like leather seats, carpets, chrome bumpers and fittings. The overall shape was very similar to both the Dino Berlinetta Speciale and more so to the Dino Berlinetta GT, the final prototype before the production variant. Apart from the seating arrangement, also the overall dimensions and shape were altered to accommodate a bigger V12 powerplant. The Ferrari Berlinetta Speciale was also known as "Tre-Posti" for its unique seating design.
Additional original features include a full, fixed Perspex sunroof. Overall side profile and details like a visible fuel cap and tear shaped air vents were similar to the Dino counterparts. An integrated chrome roll bar was added to the cabin for additional protection.
Production
Only two examples were ever built with various distinctive details, both in 1966.
= Chassis 8971
=Two racing chassis of the 365/P2 were used by Pininfarina in order to build the concept car. The first car was built on chassis 8971 and was the one destined to be a show car. Completed in September 1966 and finished in Garenia White, the first example was presented in October of the same year at the Paris Motor Show on the Pininfarina stand. The interior with the three seats, was upholstered in black imitation leather. The car was however lacking any running gear at that time.
The Berlinetta Speciale chassis 8971, was presented all around the world on numerous occasions during 1966 and 1967, appearing at the Earl's Court Motor Show in London, Brussels, Geneva, and Los Angeles motor shows and salons. After the show tour, the US Ferrari importer Luigi Chinetti, acquired the car in May 1967. It was invoiced by Ferrari for the racing chassis with modifications and by Pininfarina for the bodywork and tooling bills. The reported price was around US$21,160, without shipping costs. Chinetti soon sold the car twice to his customers, at first to a New York banker for US$26,000 but bought back the car on both occasions.
From 1969, the Berlinetta Speciale remained in the Chinetti family, being used by Chinetti's son Luigi "Coco" Chinetti Junior. In 2014 Gooding & Co. offered the car for sale and even though the reserve was not met and the car remained unsold, the highest bid was US$23.5 million.
= Chassis 8815
=The second example, chassis 8815, was reportedly commissioned by the Chairman of Fiat Gianni Agnelli, upon seeing the first example presented at the Paris Motor Show. He took delivery of the car sometime in 1966.
This example was finished in metallic grey with a black-painted pinstripe along the length of the car. Originally it had no sunroof, but it was installed early on. The car was delivered with a large, chromed rear spoiler and with fabric covered seats and during its lifetime was repainted in metallic blue and then red.
Specifications
= Engine and transmission
=The 365P is powered by a race-oriented variant of the Colombo 60° V12 engine, carried over from the Ferrari 365 P2, with SOHC valvetrain actuating two valves per cylinder. It was mounted in the rear, mid-section of the car, longitudinally with the transaxle-type, 5-speed manual gearbox. The total capacity of 4,390 cc (4.4 L; 267.9 cu in) resulted from internal measurements of 81 by 71 mm (3.2 by 2.8 in) of bore and stroke respectively.
Fuel was fed by three Weber 40DFI carburettors and with a compression ratio of 8.8:1 the resulting power output was 380 PS (279 kW; 375 hp) at 7,300 rpm. The engines also retained the dry-sump lubrication system from the racing specification. Top speed was estimated at 245 km/h (152.2 mph). Engine was not detuned as compared to the original.
= Chassis and suspension
=The mid-engine, tubular competition chassis was similar to that of Ferrari 330 P2 and was in fact borowed from the 365 P2 customer version, the same as used by Luigi Chinetti's NART team in 1965, with addition of a roll bar and cast aluminium wheels. The wheelbase, measuring 2,600 mm (102.4 in), was 200 mm (7.9 in) stretched over the original frame.
The car uses independent suspension front and rear, with unequal-length wishbones, coil springs, telescopic shock absorbers with anti-roll bars. The four-wheel disc brakes are servo-assisted. The kerb weight was 1,020 kg (2,249 lb) and the total length 4,400 mm (173.2 in).
See also
Dino Berlinetta Speciale
References
= Bibliography
=Eaton, Godfrey (1983). Ferrari: The Road And Racing Cars. Haynes Publishing. ISBN 0-85429-367-1.
External links
365 P Jewel: Ferrari History
Kata Kunci Pencarian:
- Ferrari 365 P Berlinetta Speciale
- Dino (marque)
- Ferrari Berlinetta Boxer
- List of Ferrari road cars
- Ferrari 330
- Pininfarina
- Ferrari
- Ferrari California
- Sergio Pininfarina
- Gianni Agnelli
