• Source: Long and short scales

The long and short scales are two of several naming systems for integer powers of ten which use some of the same terms for different magnitudes.
Some languages, particularly in East Asia and South Asia, have large number naming systems that are different from both the long and short scales, such as the Indian numbering system and the Chinese, Japanese, or Korean numerals.
Much of the remainder of the world adopted either the short scale or the long scale for everyday counting powers of ten. Countries with the usage of the long scale include most countries in continental Europe and most that are French-speaking, German-speaking and Spanish-speaking. Usage of the short scale is found in Brazil and in most English-speaking and Arabic-speaking countries.
For whole numbers smaller than 1,000,000,000 (109), such as one thousand or one million, the two scales are identical. For larger numbers, starting with 109, the two systems differ. For identical names, the long scale proceeds by powers of one million, whereas the short scale proceeds by powers of one thousand. For example, the short scale "one billion" (in many languages other than English called "one milliard", even on the short scale) means one thousand million (1,000,000,000), whereas in the long scale, "one billion" always means one million million (1,000,000,000,000). The long scale system employs additional terms for interleaved values, typically replacing the word ending "-ion" by "-iard". For numbers from 1012 and up, all the names in the short scale have different meanings than they have in the long scale.
To avoid confusion resulting from the coexistence of the two scales, the International System of Units (SI) recommends using the metric prefix to indicate orders of magnitude, associated with physical quantities.




Scales


In both short and long scale naming, names are given each multiplication step for increments of the base-10 exponent of three, i.e. for each integer n in the sequence of multipliers 103n. Both systems use the same names for certain multipliers, including those for all numbers smaller than 109. The differences arise from the assignment of identical names to specific values of n, for numbers starting with 109, for which n=3. In the short scale system, the identical names are for n=3, 4, 5, ..., while the long scale places them at n=4, 6, 8, etc.




= Short scale

=
In the short scale, a billion (in many countries called a "milliard") means a thousand millions (1,000,000,000, which is 109), a trillion means one thousand billions (1012), and so on. Thus, a short scale n-illion equals 103n+3.




= Long scale

=
In the long scale, a billion means one million millions (1012) and a trillion means one million billions (1018), and so on. Therefore, a long scale n-illion equals 106n.
In some languages, the long scale uses additional names for the intermediate multipliers, replacing the ending -ion with -iard; for example, the next multiplier after million is milliard (109); after a billion it is billiard (1015). Hence, a long scale n-iard equals 106n+3.




= Scale naming American English vs European English

=
This table displays the naming conventions in the two English numbering systems, with conflicting terms shown in bold.




Comparison


The relationship between the numeric values and the corresponding names in the two scales can be described as:

The relationship between the names and the corresponding numeric values in the two scales can be described as:

The root mil in million does not refer to the numeral, 1. The word, million, derives from the Old French, milion, from the earlier Old Italian, milione, an intensification of the Latin word, mille, a thousand. That is, a million is a big thousand, much as a great gross is a dozen gross or 12 × 144 = 1728.
The word milliard, or its translation, is found in many European languages and is used in those languages for 109. However, it is not found in American English, which uses billion, and not used in British English, which preferred to use thousand million before the current usage of billion. The financial term yard, which derives from milliard, is used on financial markets, as, unlike the term billion, it is internationally unambiguous and phonetically distinct from million. Likewise, many long scale countries use the word billiard (or similar) for one thousand long scale billions (i.e., 1015), and the word trilliard (or similar) for one thousand long scale trillions (i.e., 1021), etc.




History


Although this situation has been developing since the 1200s, the first recorded use of the terms short scale (French: échelle courte) and long scale (French: échelle longue) was by the French mathematician Geneviève Guitel in 1975.
The short scale was never widespread before its universal adoption in the United States. It has been taught in American schools since the early 1800s. It has since become common in other English-speaking nations and several other countries. For most of the 19th and 20th centuries, the United Kingdom largely used the long scale, whereas the United States used the short scale, so that the two systems were often referred to as British and American in the English language. After several decades of increasing informal British usage of the short scale, in 1974 the government of the UK adopted it, and it is used for all official purposes. The British usage and American usage are now identical.
The existence of the different scales means that care must be taken when comparing large numbers between languages or countries, or when interpreting old documents in countries where the dominant scale has changed over time. For example, British English, French, and Italian historical documents can refer to either the short or long scale, depending on the date of the document, since each of the three countries has used both systems at various times in its history. Today, the United Kingdom officially uses the short scale, but France and Italy use the long scale.
The pre-1974 former British English word billion, post-1961 current French word billion, post-1994 current Italian word bilione, Spanish billón, German Billion, Dutch biljoen, Danish billion, Swedish biljon, Finnish biljoona, Slovenian bilijon, Polish bilion, and European Portuguese word bilião (with a different spelling to the Brazilian Portuguese variant, but in Brazil referring to short scale) all refer to 1012, being long-scale terms. Therefore, each of these words translates to the American English or post-1974 British English word: trillion (1012 in the short scale), and not billion (109 in the short scale).
On the other hand, the pre-1961 former French word billion, pre-1994 former Italian word bilione, Brazilian Portuguese word bilhão, and Welsh word biliwn all refer to 109, being short scale terms. Each of these words translates to the American English or post-1974 British English word billion (109 in the short scale).
The term billion originally meant 1012 when introduced.

In long scale countries, milliard was defined to its current value of 109, leaving billion at its original 1012 value and so on for the larger numbers. Some of these countries, but not all, introduced new words billiard, trilliard, etc. as intermediate terms.
In some short scale countries, milliard was defined to 109 and billion dropped altogether, with trillion redefined down to 1012 and so on for the larger numbers.
In many short scale countries, milliard was dropped altogether and billion was redefined down to 109, adjusting downwards the value of trillion and all the larger numbers.
Timeline

As large numbers in natural sciences are usually represented by metric prefixes, scientific notation or otherwise, the most commonplace occurrence of large numbers represented by long or short scale terms is in finance. The following table includes some historic examples related to hyper-inflation and other financial incidents.

Timeline




Current usage






= Short scale users

=



English-speaking


Most English-language countries and regions use the short scale with 109 being billion. For example:



Arabic-speaking


Most Arabic-language countries and regions use the short scale with 109 being مليار milyar, except for a few countries like Saudi Arabia and the UAE which use the word بليون billion for 109. For example:



Other short scale


Other countries also use a word similar to trillion to mean 1012, etc. Whilst a few of these countries like English use a word similar to billion to mean 109, most like Arabic have kept a traditionally long scale word similar to milliard for 109. Some examples of short scale use, and the words used for 109 and 1012, are




= Long scale users

=
The long scale is used by most Continental European countries and by most other countries whose languages derive from Continental Europe (with the notable exceptions of Albania, Greece, Romania, and Brazil). These countries use a word similar to billion to mean 1012. Some use a word similar to milliard to mean 109, while others use a word or phrase equivalent to thousand millions.



Dutch-speaking


Most Dutch-language countries and regions use the long scale with 109 = miljard.



French-speaking


Most French-language countries and regions use the long scale with 109 = milliard, for example:



German-speaking


German-language countries and regions use the long scale with 109 = Milliarde.



Portuguese-speaking


With the notable exception of Brazil, a short scale country, most Portuguese-language countries and regions use the long scale with 109 = mil milhões or milhar de milhões.



Spanish-speaking


Most Spanish-language countries and regions use the long scale, for example:



Other long scale


Some examples of long scale use, and the words used for 109 and 1012, are




= Using both

=
Some countries use either the short or long scales, depending on the internal language being used or the context.




= Using neither

=
The following countries use naming systems for large numbers that are not etymologically related to the short and long scales:




= By continent

=
The long and short scales are both present on most continents, with usage dependent on the language used. Examples include:




= Notes on current usage

=



Short scale




Long scale




Both long and short scale




Neither long nor short scale





Alternative approaches


In written communications, the simplest solution for moderately large numbers is to write the full amount, for example 1,000,000,000,000 rather than 1 trillion (short scale) or 1 billion (long scale).
Combinations of the unambiguous word million, for example: 109 = "one thousand million"; 1012 = "one million million".
Scientific notation (also known as standard form or exponential notation, for example 1×109, 1×1010, 1×1011, 1×1012, etc.), or its engineering notation variant (for example 1×109, 10×109, 100×109, 1×1012, etc.), or the computing variant E notation (for example 1e9, 1e10, 1e11, 1e12, etc.). This is the most common practice among scientists and mathematicians, and is both unambiguous and convenient.
SI prefixes in combination with SI units, for example, giga for 109 and tera for 1012 can give gigawatt (=109 W) and terawatt (=1012 W). The International System of Units (SI) is independent of whichever scale is being used. Use with non-SI units (e.g. "giga-dollars", "megabucks") is possible. k€ and M€ is frequently encountered.




See also






References






External links


BBC News article: "Is trillion the new billion?"
Live-Counter.com: How to visualize large numbers:"

Kata Kunci Pencarian:

• Nama-nama bilangan besar
• X (media sosial)
• Bumi
• Billie Eilish
• Bakteri
• Kuda laut barbour
• Clostridium difficile
• Albatros
• Garis waktu peristiwa jauh di masa depan
• Teknesium-99m
• Long and short scales
• Names of large numbers
• Prunella Scales
• Scale
• Sextillion (disambiguation)
• Liam Scales
• Long run and short run
• Billion (disambiguation)
• Orders of magnitude (numbers)
• Chinese numerals