• Source: Solid hydrogen

Solid hydrogen is the solid state of the element hydrogen, achieved by decreasing the temperature below hydrogen's melting point of 14.01 K (−259.14 °C; −434.45 °F). It was collected for the first time by James Dewar in 1899 and published with the title "Sur la solidification de l'hydrogène" (English: On the freezing of hydrogen) in the Annales de Chimie et de Physique, 7th series, vol. 18, Oct. 1899. Solid hydrogen has a density of 0.086 g/cm3 making it one of the lowest-density solids.




Molecular solid hydrogen


At low temperatures and at pressures up to around 400 GPa (3,900,000 atm), hydrogen forms a series of solid phases formed from discrete H2 molecules. Phase I occurs at low temperatures and pressures, and consists of a hexagonal close-packed array of freely rotating H2 molecules. Upon increasing the pressure at low temperature, a transition to Phase II occurs at up to 110 GPa. Phase II is a broken-symmetry structure in which the H2 molecules are no longer able to rotate freely. If the pressure is further increased at low temperature, a Phase III is encountered at about 160 GPa. Upon increasing the temperature, a transition to a Phase IV occurs at a temperature of a few hundred kelvin at a range of pressures above 220 GPa.
Identifying the atomic structures of the different phases of molecular solid hydrogen is extremely challenging, because hydrogen atoms interact with X-rays very weakly and only small samples of solid hydrogen can be achieved in diamond anvil cells, so that X-ray diffraction provides very limited information about the structures. Nevertheless, phase transitions can be detected by looking for abrupt changes in the Raman spectra of samples. Furthermore, atomic structures can be inferred from a combination of experimental Raman spectra and first-principles modelling. Density functional theory calculations have been used to search for candidate atomic structures for each phase. These candidate structures have low free energies and Raman spectra in agreement with the experimental spectra. Quantum Monte Carlo methods together with a first-principles treatment of anharmonic vibrational effects have then been used to obtain the relative Gibbs free energies of these structures and hence to obtain a theoretical pressure-temperature phase diagram that is in reasonable quantitative agreement with experiment. On this basis, Phase II is believed to be a molecular structure of P21/c symmetry; Phase III is (or is similar to) a structure of C2/c symmetry consisting of flat layers of molecules in a distorted hexagonal arrangement; and Phase IV is (or is similar to) a structure of Pc symmetry, consisting of alternate layers of strongly bonded molecules and weakly bonded graphene-like sheets.




See also


Compressed hydrogen
Liquid hydrogen
Metallic hydrogen
Slush hydrogen
Timeline of hydrogen technologies




References






Further reading


Melting Characteristics and Bulk Thermophysical Properties of Solid Hydrogen", Air Force Rocket Propulsion Laboratory, Technical Report, 1972




External links


"Properties of solid hydrogen at very low temperatures" (2001)
"Solid hydrogen experiments for atomic propellants"

Kata Kunci Pencarian:

• Hidrogen
• Nikel sulfida
• Metanogen
• Vulcain
• Litium nitrida
• Gaya gerak listrik
• Propelan roket
• Moderator neutron
• Kalium sulfat
• Klorin
• Solid hydrogen
• Metallic hydrogen
• Sodium percarbonate
• Hydrogen
• Hydrogen peroxide–urea
• Liquid hydrogen
• Hydrogen bond
• Slush (disambiguation)
• Fuel cell
• Hydrogen chloride